Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Grizzly worth the money ?

Featured Replies

I've been looking into upgrading some tools for my garage and albeit they don't get used often it might be because they aren't the greatest tools in their class.

Anyways the grizzly g0715p table saw is what I'm looking at. And I was also wondering if their dust collector is worth while looking into. The table saw for me is a key tool for woodworking and I want something that's under $1000 before taxes and going to last for years to come

Sent from my SM-G903W using Tapatalk

This is covered pretty frequently if you do some searches. In fact, about 10 posts down comparing PM, Grizzly, etc. It's sometimes covered vehemently. 

Allow me to summarize:

One group: EFF GRIZZ  SON

Another: I had it for 10 years, no problems.

Another: It's ok, but I will upgrade when I get more cash

Another: *link to hand saw*

In other words, lot of agreements and disagreements on the subject.

 

A lot will depend on what you are upgrading from and your expectations.

Its better than Harbor Freight stuff. It's a little below Jet in quality . Plenty of guys like it. A few have voiced the shortcomings.

Rockler has their Powermatic and Jet tools on sale starting tomorrow. I have the JPS-10 TS and while it's not as nice and beefy as most of the guys have on here, I really enjoy it.

Grizzly usually offers more tool for the money if you're willing to be your own middleman.  Some of their tools are excellent....like most brands, not all are winners, so you need to do your due diligence and research each one.

Do you have 220v available?  If so, I'd give serious consideration to getting into the G1023RL 3hp cabinet saw....it's a great saw and a great value if you're looking for an awesome saw that'll serve you well for decades.   

The G0715P has similar trunnion design as the Ridgid R4512 and Cman 21833, and at one time it shared the same alignment issues that plagued those saws as well.  It's been a while since I've read of an issue, and have also read that it's supposedly been fixed.  It's something I'd want to ask a Grizzly technician about...not a sales person.

The Jet Proshop that K Cooper mentioned has a really good track record.  The guts are similar to those in the Laguna Fusion, but it has a better fence (the Fusion has an aluminum two piece front rail...the Jet has a single steel front rail).   If you can get one on sale anywhere near the price of a G0715P, I'd lean toward the Jet.  I'd still lean to a G1023RL or G0690 over any hybrid if you can swing it.

FWIW, my Grizzly G1029 2hp DC has been running strong for 15 years without a hiccup.  I know four other ww-ers in my town that have had the same DC for longer than I have, and all are still going strong.

 

 

What saw do you use now? No first hand experience with the 715P. But there are an awful lot of reviews out there. Just doing a quick search I came across this one: 

 

The videography is pretty terrible but about 5 minutes in he stops setting it up and starts talking about features. He is pretty exhaustive methinks and if not unbiased he does give you a pretty good idea of how the saw would function.

  • Author

I use the Dewalt contractor TS so it's an upgrade no matter what. The one thing I'm looking for is a good fence with a flat top. I like the rack and pinion fence but I want a hybrid for the good power and stuff

Sent from my SM-G903W using Tapatalk

Well this grizzly will be a massive upgrade for you then. I would agree that the entry level cabinet saw would be better but in the scheme of things just about anything would be better then a contractor saw with a plastic top.

Not a big grizzly fan boy but I have read that a lot of craftsman, most of which are on here that own a Griz cabinet saw say it is capable of doing what is needed.

I don't know of any saw on the market that gives you brand new with warranty bang for your buck.

I personally went with a 20 year old unisaw, replaced 3ph motor with a 3 hp baldor, new belts, bearings, wiring,switch and paint for just under a grand so a refurbish is also within your price range if you have access to mechanic type tools and enjoy that type of work which I do. 

  • Author
Not a big grizzly fan boy but I have read that a lot of craftsman, most of which are on here that own a Griz cabinet saw say it is capable of doing what is needed.

I don't know of any saw on the market that gives you brand new with warranty bang for your buck.

I personally went with a 20 year old unisaw, replaced 3ph motor with a 3 hp baldor, new belts, bearings, wiring,switch and paint for just under a grand so a refurbish is also within your price range if you have access to mechanic type tools and enjoy that type of work which I do. 

I would love to be able to get an old saw and all but my skills with refurbishing isn't all that good. I would much prefer a new saw that is flat and running strong. Then putting money into an old one without a guarantee of it running fine afterwards. If I buy new then I take care of it and it becomes an old antique that with any luck still runs like the day I got it

Sent from my SM-G903W using Tapatalk

I have been buying Grizzly tools for over 20yrs now, and I still have the first one I bought.  I have been very satisfied with all of them.  So to answer your question, for me, they are worth the money.  Their customer service has always been outstanding which means a great deal to me when I am making a large purchase.  Since I live 20 miles away from their Washington show room I get to go see what I am buying (which is really important to me) and I save on shipping.  Now do I have issues with some of the tools, of course, but I knew what I was getting when I plopped down the money.  I wouldn't hesitate to buy from them again.  Just my $.02. 

Being on a budget grizzly is nice, would I have liked to buy a better brand, of course, but being a hobby guy and not using them everyday all day, not real worried about them messing up too often. 

558728A5-C051-4DB5-B94F-7BFEBD854DF7_zps

  • Author

I already have a planer and bandsaw and drill press. The basics nothing fancy. However to the point of this post I was looking at the cheaper and easily available ridgid table saw from home Depot. I liked everything about it for the longest time until I found out it has a split rail aluminum made. Which isn't a great fence style. So I had a few options but the grizzly looked to be the best of them all. Lowe's has a delta saw but I heard they weren't much better then the ridgid. I want a good table saw before I upgrade other aspects but I don't want spend much right now since it is still just a side hobbyist job

Sent from my SM-G903W using Tapatalk

13 minutes ago, Chewie17 said:

However to the point of this post I was looking at the cheaper and easily available ridgid table saw from home Depot. 

Forgive me but that table saw was never even mentioned in your first post.  You specifically asked about a certain model grizz saw.  It looks like most replies were direct answers to your question. 

  • Author
However to the point of this post I was looking at the cheaper and easily available ridgid table saw from home Depot. 

Forgive me but that table saw was never even mentioned in your first post.  You specifically asked about a certain model grizz saw.  It looks like most replies were direct answers to your question. 

I was which was why I wanted to clear up the reasoning of my choice of the grizzly because it's better then my other choices

Sent from my SM-G903W using Tapatalk

9 hours ago, Chewie17 said:

I already have a planer and bandsaw and drill press. The basics nothing fancy. However to the point of this post I was looking at the cheaper and easily available ridgid table saw from home Depot. I liked everything about it for the longest time until I found out it has a split rail aluminum made. Which isn't a great fence style. So I had a few options but the grizzly looked to be the best of them all. Lowe's has a delta saw but I heard they weren't much better then the ridgid. I want a good table saw before I upgrade other aspects but I don't want spend much right now since it is still just a side hobbyist job

Sent from my SM-G903W using Tapatalk

I'd go with the Delta 36-725 over the R4512 anytime....the fence is definitely better IMHO. It's still a split front rail, but is steel with a steel t-square fence tube.  If the split rail is an issue, it'd be pretty easy to install a single piece rail from steel tube stock.  It also has a better track record...no systemic alignment problems.  I still think the Griz is a better choice than either, but if you don't want to spend that much, and can't find a good used alternative, I'd at least give the Delta look before ruling it out based on something you heard.

  • Author

My biggest worry is having a split rail fence may just be my worry wort self coming out. I'd rather have one piece to setup as apposed to 2

Sent from my SM-G903W using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.