Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Mortise jigs for Bosch 1617 router

Featured Replies

Does anyone know of a commercially made mortise jig/ guide that can be used with Bosch 1617 router?  Bosch has none and internet not  much hx.elp.  Than

I don't know of anything commercially available but a guide bushing set and the Bosch adapter make these very easy to build with some 3/4" ply. 

Making your own gives you the ability to use one bit/bushing combo to make a lot of different sized mortises. 

  • Author

Thanx.  Any suggestions re finding plans plans to make one that works?

  • Author

If it isn't too much trouble, I would love to see it.  Thanx..( I  can follow plans, but am not so good when it comes to imagining plans.)

The homie marc does a better job than my drawing.  You can skip to about the 5 minute mark.  I keep one set for a 3/8", 1/2" and 3/4 mortises.  I made my first from mdf but it developed grooves so I switched to plywood. 

 

  • Author

Thanx!!! Just what I  needed.  I owe you.

  • 2 weeks later...
On ‎3‎/‎14‎/‎2016 at 9:02 PM, weelis said:

Thanx!!! Just what I  needed.  I owe you.

If you owe Brendon, you can bet, he'll collect!

Most of the time you don't even need a jig, just an edge guide and a straight bit.  Mark out your mortises and start plunging.  If you need to batch out a million mortises or you need an odd width or absolutely precise length mortise, etc, then jigs are great.  But for the one-off mortise in some legs to receive aprons...no need.  I bet 90% of my mortises are done without a jig.

Now get a second guide to attach to the other side as well.  Allows you to ensure that the router can't wander off course and it becomes more like a jig than an edge guide.

2 hours ago, Lester Burnham said:

Having just used an edge guide for the first time this past weekend, I couldn't agree more. The guide is where it's at.

TfncRi6.jpg

Be careful with that craftsman edge guide when doing mortises near the end of the stock.  Each of those two faces aren't actually in line with each other,  they bow in slightly.  I fixed mine up with a longer auxiliary rail so it was flat along the length and didn't have a gap so I could cut all the way to the end if needed.

My favorite of all time is the Mortise Pal (no longer made of course). I only wish I hadn't sold my version 1 when I bought my version 2.  The large shop made versions do a good job.  The ShopNotes Vol 11 Issue 64 is a good example.

 

ShopNotes Vol 11 Iss 64 Mortise Jig.JPG

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.