Popular Post drzaius Posted March 22, 2016 Popular Post Report Posted March 22, 2016 There has been much discussion on this & other forums about how to properly lubricate table saw parts. Many use a dry lubricant or wax so as not to attract sawdust. I have a pretty new SawStop & want to make sure it lasts so I emailed them with the question. A support tech called me back today & we had quite a lengthy discussion about the matter. Their recommendation is to leave the grease on that it came with & just inspect every couple of months for dust build up. When it looks bad, or when the wheels start to get harder to turn, wipe of the old grease & replace with wheel bearing grease, preferably marine grade. The problem with dry lubricants is that while they may make the parts move easily & smoothly, they don't provide good protection to the metal surfaces that rub against each other. WD-40 should only be used for cleaning purposes, not lubrication. Seems like this advice would apply to any table saw so I thought I'd share it. 5 Quote
Coop Posted March 23, 2016 Report Posted March 23, 2016 Excellent question/topic! I just put it at the top of my to do list for this weekend. Thanks for sharing. Quote
Tom King Posted March 23, 2016 Report Posted March 23, 2016 I've been using "dry" lube on my Powermatic 62 for 41 years now, and no wear yet. Or on the other table saws here that aren't quite that old. I expect this is something a hobbyist need not worry about. Quote
Coop Posted March 23, 2016 Report Posted March 23, 2016 34 minutes ago, Tom King said: I've been using "dry" lube on my Powermatic 62 for 41 years now, and no wear yet. Or on the other table saws here that aren't quite that old. I expect this is something a hobbyist need not worry about. As in what brand Tom? Quote
mat60 Posted March 23, 2016 Report Posted March 23, 2016 This is something I been wanting to ask here ...What do you use to clean the gears off please. Quote
drzaius Posted March 23, 2016 Author Report Posted March 23, 2016 33 minutes ago, mat60 said: This is something I been wanting to ask here ...What do you use to clean the gears off please. The SawStop guy suggested WD-40 to clean off the old hardened gunk, wipe everything down & then apply the bearing grease. Mineral spirits would work even better I think. Quote
mat60 Posted March 23, 2016 Report Posted March 23, 2016 Thanks...Just a rag at first and mabe a tooth brush after you think? Quote
Tom King Posted March 23, 2016 Report Posted March 23, 2016 17 hours ago, K Cooper said: As in what brand Tom? I'm sure it's varied several times over the years. I don't even know. I just bought a new can last week, and don't even know the brand it was. Quote
Tpt life Posted March 23, 2016 Report Posted March 23, 2016 I like TDL. (Teflon Dry Lube) Sprays on wet but dries quickly to a film. Quote
Tom King Posted March 23, 2016 Report Posted March 23, 2016 Here's the kind I bought last week. I like this attached straw type spray lube can for as many different applications as possible. http://wd40specialist.com/products/dry-lube/ Quote
knotscott Posted March 25, 2016 Report Posted March 25, 2016 Years ago Wood Mag was recommending spray on white lithium grease. Sprays on wet, dries like a wax so it won't attract saw dust. Teflon Dry Lube makes sense too. Quote
Jfitz Posted March 25, 2016 Report Posted March 25, 2016 There was an article about this in a recent magazine issue I think. Not sure which one - when I got home I'll take a look. I do recall that a spray called PG2000 was mentioned as a good non-grease lubricant. Quote
drzaius Posted March 26, 2016 Author Report Posted March 26, 2016 I've decided to go with the manufacturer's recommendation for lubrication. I'd rather err on the side of caution. After several months of use, there is just a trace of sawdust on the grease. The shroud on the blade seems to catch virtually all the dust. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.