Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Happy bday to me

Featured Replies

I bent mine just the same when i got it. Wheel was locked and i pushed the machine and it bent. Pretty cheap base. I bent it back and it's been fine since.

Sent from my SM-N910W8 using Tapatalk

  • Author

Is this the normal way to 'end' the paper on the drum? I was surprised to see some of the drum exposed...I haven't been able to find a good youtube vid showing how to change paper once I'm ready...would appreciate a link or 2 if you guys know of a good one...

WLhg9L5.png

Yes that's correct.  When you unroll it, you will see complimentary angles on each side.  Those allow you to run the paper across the drum instead of rolling it on to of itself.  There will be a bit of drum exposed because of that. 

I made a template from 1/4" MDF copying the length and both end angles so I could cut strips from rolls which,is much more affordable.

Yes , the exposed triangle is normal.

7 hours ago, JosephThomas said:

Is this the normal way to 'end' the paper on the drum? I was surprised to see some of the drum exposed...I haven't been able to find a good youtube vid showing how to change paper once I'm ready...would appreciate a link or 2 if you guys know of a good one...

WLhg9L5.png

Yep, that is correct. 

I second what wdwerker did with the MDF template. 

10 hours ago, wdwerker said:

I made a template from 1/4" MDF copying the length and both end angles so I could cut strips from rolls which,is much more affordable.

Yes , the exposed triangle is normal.

That's a good idea steve,  I'm going to implement this on the next change. What I've found by marking the roll to be cut off of the last strip is after a few cuts,  you tend to start creeping away from what it was. 

  • Author

What kind of paper do you guys like and where do you find it? If you can make it easy on me with a direct link to amzn or something wouldn't complain :)

2 minutes ago, JosephThomas said:

What kind of paper do you guys like and where do you find it? If you can make it easy on me with a direct link to amzn or something wouldn't complain :)

My experience has been limited to the paper from Grizzly. I bought a sanding machine from them years ago, I have had good results with their sandpaper, and so I never experimented with any others. 

I would be interested in knowing what other sand paper the guys recommend as well. I have thought several times that I might try another brand/supplier, but never ended up doing it. 

16 hours ago, wdwerker said:

I made a template from 1/4" MDF copying the length and both end angles so I could cut strips from rolls which,is much more affordable.

Yes , the exposed triangle is normal.

I remember you posting this before and I ordered some from Peachtree as you recommended but I failed to label the patten left and right. Sure enough, with two choices, I made the wrong one. Now the pattern is labeled!

I use the red Chinese import abrasive from Peachtree because I can pick it up on the way to the shop in the morning. It lasts ok for the price. 

The 3M purple abrasive is great and it lasts a lot longer but it costs 3x more !

  • Author

Looks like the conveyor belt is noisy because it's offset a bit...

G0LNTkR.png

Took everyone's advice and bent the base back into shape...hardest part was lefting the drum sander off of it and onto my bench...ouch. Then I took @wdwerker 's advice and added some wood to help support it. Thanks for the help everyone.taONxJv.png

04ha7ZL.png

RGNbYSA.png

e5IzWPR.png

Good as new!

 

 

Sorry you had to do that but glad you got it fixed.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.