Recommended Posts

Posted
37 minutes ago, woodbutcher74 said:

Happy Birthday. Is it one of the new Ryobi multitools?:D

Close...

32 minutes ago, Brendon_t said:

Glad he didn't sell it out from under you man.  What kind of paper did he end up having? That'll be a long ride back to SD without a rear view mirror

It's the supermax paper....a few rolls of 150, 180, and 220 (i think). The trunk closed just enough for me to see over the top....of course 3 different highway patrol cars pulled in behind me during the drive to inspect, thankfully none pulled me over. It was pretty safe, anyway, I was just worried about big bumps, but it worked out fine...

Sadly now it's too heavy to get out of the car without a friend, still waiting for someone to show up.

Just double checked, 3 rolls of 150, 3 rolls of 220, 4 rolls of 180, plus there's a pretty new looking 180 on the drum right now. Surprised there weren't any lower grits, but it was a nice deal all included.

Posted
6 minutes ago, K Cooper said:

Kobota tractor rear ended your car?

Had to google to see what that is. I don't think they let those on the roads around here except maybe for short sprints :)

7 minutes ago, Brendon_t said:

"I hear" 

Rrrrrright.

  • Like 1
Posted
57 minutes ago, toddclippinger said:

Excellent! The sanding machine is a game changer in the shop!

I totally agree. The time savings alone are astronomical when doing tedious stuff like flattening cutting boards.  

I've only had my domino a month and only messed around with small projects do far but today,  if I had to give one up,  the drum sander would stay. 

Posted

I was quite surprised to find that the drum itself is much much quieter than the conveyor belt....is that normal? Starting up the drum sounds like a dream, hardly a sound until a board is sent thru...but the conveyor belt sounds like an old car begging to be put down.

Posted

That's interesting.  My drum is also very quiet,but so is the conveyor belt.  The dust collector is absolutely the loudest part of my sander. Without that,  you hardly know the machine is running until it contacts wood, but it is still one of the quietest machines in the whole shop.

Posted

Only problem I've found so far is with the dumb base...the "foot" is all bent, and if I unlock that wheel it pivots inward and almost takes the whole thing down... wondering if there's a way I can fix or strengthen this without replacing the entire base....any ideas?

 

E72EMQg.png

Posted
Only problem I've found so far is with the dumb base...the "foot" is all bent, and if I unlock that wheel it pivots inward and almost takes the whole thing down... wondering if there's a way I can fix or strengthen this without replacing the entire base....any ideas?

 

E72EMQg.png

Take the wheel off, put a block under to act as an anvil and hit it with a hammer so it's flat..

Sent from my 831C using Tapatalk

  • Like 1
Posted

Once it is straight you could add a strip of hardwood to connect the legs on the short side. This would raise the height a little but prevent it from bending again as easily.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 76 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined