Coop Posted May 11, 2016 Report Posted May 11, 2016 A friend called yesterday and said that the inside blade of his dado stack wouldn't come off of the arbor on his ts. I walked him thru dis-lodging it where it will spin freely but he still can't get it off. I suggested that he take the edge of a file, with the saw unplugged naturally, and slightly file on the thread closest to the blade while rotating the abor. I'm thinking it's stuck down in the last thread. Has anyone ever had this problem? Oh, and he's scared to file the one thread in fear that the nut, which probably will never see the thread, will loosen when operating the saw. Quote
drzaius Posted May 11, 2016 Report Posted May 11, 2016 Even emery cloth might do it. I had a saw with a tight arbor & it took very little work to make it fit. Probably much less than a ten thousandth. Quote
..Kev Posted May 11, 2016 Report Posted May 11, 2016 My first Forest Dado stack was so tight on my arbor that it wouldn't go on. As I said in that thread, they are not consistent in sice so, it's best to know ahead of time! That info doesn't help your friend tho.. Yes, he file or sand a little and never effect the nut. He could also try "rocking" it a little to see if he can get it to slide off.. From there, a little sanding to make future use easier.. Quote
RichardA Posted May 11, 2016 Report Posted May 11, 2016 And once off, take the very same cloth and do the inside of the blade arbor hole! Quote
Janello Posted May 11, 2016 Report Posted May 11, 2016 My first choice would be to use a lubricant like kroil or 3 in 1 oil while rocking the blade. My second choice would be to heat the blade with a cigar lighter close to the arbor. If using the lubricant...I would soak the arbor with mineral spirits and a rag once I got the blade off to clean up the oil residue. But if this was yesterday, and he still hasn't gotten it off yet, he may want to call the fire department. Quote
..Kev Posted May 11, 2016 Report Posted May 11, 2016 2 minutes ago, Janello said: My first choice would be to use a lubricant like kroil or 3 in 1 oil while rocking the blade. My second choice would be to heat the blade with a cigar lighter close to the arbor. If using the lubricant...I would soak the arbor with mineral spirits and a rag once I got the blade off to clean up the oil residue. Please note what you put on the arbor before applying the heat Quote
Janello Posted May 11, 2016 Report Posted May 11, 2016 That's for extra heat. I added the fire dept... too. Quote
Coop Posted May 11, 2016 Author Report Posted May 11, 2016 Thanks guys. He said he had his wife holding the hair dryer on the blade while he tried to rock the blade with gloved hands. He texted me moments earlier and his wife suggested that he put the stack back on and use this saw (it's a inexpensive Ridgid unit) for dado cuts and buy him another, better saw for cutting. I told him of this site and to study the different threads on table saws and order him one tonight before she came to her senses! 2 Quote
Tom King Posted May 11, 2016 Report Posted May 11, 2016 It should unscrew off while pulling slightly. Just notice which way the threads slope. Quote
..Kev Posted May 11, 2016 Report Posted May 11, 2016 4 minutes ago, K Cooper said: Thanks guys. He said he had his wife holding the hair dryer on the blade while he tried to rock the blade with gloved hands. He texted me moments earlier and his wife suggested that he put the stack back on and use this saw (it's a inexpensive Ridgid unit) for dado cuts and buy him another, better saw for cutting. I told him of this site and to study the different threads on table saws and order him one tonight before she came to her senses! Sounds like a well played plan to me! Nice! Quote
Brendon_t Posted May 11, 2016 Report Posted May 11, 2016 I've seen the commercials. If it is stuck over 4 hours, you're supposed to go to the ER. Quote
Coop Posted May 11, 2016 Author Report Posted May 11, 2016 3 minutes ago, Brendon_t said: I've seen the commercials. If it is stuckstuck over 4 hours, you're supposed to go to the ER. I have a brother that actually had that problem, but that's another story for another forum, but the ending wasn't pretty, so I'm told. Quote
..Kev Posted May 11, 2016 Report Posted May 11, 2016 35 minutes ago, K Cooper said: I have a brother that actually had that problem, but that's another story for another forum, but the ending wasn't pretty, so I'm told. Damn! No happy ending there Quote
Coop Posted May 11, 2016 Author Report Posted May 11, 2016 Yep! Started out as an adventure and ended up as a disaster! Quote
Janello Posted May 11, 2016 Report Posted May 11, 2016 Eric had a disaster with big wood. Blew a hole right through his bedroom wall. Quote
Brendon_t Posted May 11, 2016 Report Posted May 11, 2016 1 minute ago, Janello said: Eric had a disaster with big wood. Blew a hole right through his bedroom wall. I hope your brother fared better than the chainsaws it took to fix Eric's disaster Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.