Popular Post wouldwurker Posted June 2, 2016 Popular Post Report Posted June 2, 2016 As I mentioned in prior posts, I have Steve (wdwrker)'s lathe on loan...which of course then prompted me to spend a couple bucks in a Supernova 2 chuck and a suite of Easy Wood Tools. This was a fun one. Cut my teeth on a few techniques like cutting a dovetail jawed tenon as well as making an on the fly jam-chuck. Learned a lot from the experience. The wood was a little punky where the bug holes were...which added a bit of clinch factor towards the end. The holes gives it some rustic character though. 4 Quote
Chet Posted June 2, 2016 Report Posted June 2, 2016 Thats really cool Vinnie. Great first go of it. 1 Quote
Tom Cancelleri Posted June 2, 2016 Report Posted June 2, 2016 Turning is instant gratification, you're not set on certain dimensions or design, it's kind of just go for it and see if you like it, if not just keep turning. Looks good Vinny! 1 Quote
..Kev Posted June 2, 2016 Report Posted June 2, 2016 Awesome first bowl Vinny! I remember my first one and pretty sure I said similar things that you did.. Nice job! 1 Quote
wtnhighlander Posted June 2, 2016 Report Posted June 2, 2016 Sweet bowl, Vinny! Using traditional cutters, or carbide? 1 Quote
wouldwurker Posted June 2, 2016 Author Report Posted June 2, 2016 Sweet bowl, Vinny! Using traditional cutters, or carbide? Carbide. Easy wood tools full size; Rougher Smoother Detailer (None of which are named intuitively) Quote
wdwerker Posted June 2, 2016 Report Posted June 2, 2016 Looks good ! Glad you are having fun ! 1 Quote
Tom Cancelleri Posted June 2, 2016 Report Posted June 2, 2016 Carbide. Easy wood tools full size; Rougher Smoother Detailer (None of which are named intuitively) I agree, they should be square scraper, big round scraper, baby round scraper, elongated diamond scraper. Sent from my Nexus 6P using Tapatalk 1 Quote
-MattK- Posted June 2, 2016 Report Posted June 2, 2016 Nice work, Vinny! You're on your way down the rabbit hole! 2 Quote
TerryMcK Posted June 2, 2016 Report Posted June 2, 2016 I guess we'll lose you to a turning forum now Vinny. Great job on this first one. 1 Quote
pkinneb Posted June 2, 2016 Report Posted June 2, 2016 Very nice!! So for the tuners out there if can you do everything with the carbide tools or do you still use the more traditional tools as well? 1 Quote
Tom Cancelleri Posted June 2, 2016 Report Posted June 2, 2016 30 minutes ago, pkinneb said: Very nice!! So for the tuners out there if can you do everything with the carbide tools or do you still use the more traditional tools as well? For roughing, and general shaping, I prefer the carbide tools, I save my sharp edges for finish work, shear cuts, and really intricate details. Skew chisels, bowl gouges, and beading tools. Quote
pkinneb Posted June 2, 2016 Report Posted June 2, 2016 4 hours ago, Tom Cancelleri said: For roughing, and general shaping, I prefer the carbide tools, I save my sharp edges for finish work, shear cuts, and really intricate details. Skew chisels, bowl gouges, and beading tools. Cool! thanks for the info I have been looking at the carbide tools but have not added any as of yet. Quote
Popular Post wouldwurker Posted June 3, 2016 Author Popular Post Report Posted June 3, 2016 I guess we'll lose you to a turning forum now Vinny. Great job on this first one. Nah ..but if you ever see me on a pen turning forum, you have permission to kick me straight in the bullocks 3 Quote
-MattK- Posted June 3, 2016 Report Posted June 3, 2016 21 hours ago, pkinneb said: Very nice!! So for the tuners out there if can you do everything with the carbide tools or do you still use the more traditional tools as well? 21 hours ago, Tom Cancelleri said: For roughing, and general shaping, I prefer the carbide tools, I save my sharp edges for finish work, shear cuts, and really intricate details. Skew chisels, bowl gouges, and beading tools. Expanding on what Tom said, the carbide tools scrape, while some of the traditional tools will cut or shear... and they'll have some level of support when they're doing that (like the way you ride the bevel on a spindle gouge). So on tricky woods (or cuts) that are prone to tear-out, you're better off with the traditional tools, IMO. Quote
pkinneb Posted June 3, 2016 Report Posted June 3, 2016 1 hour ago, -MattK- said: Expanding on what Tom said, the carbide tools scrape, while some of the traditional tools will cut or shear... and they'll have some level of support when they're doing that (like the way you ride the bevel on a spindle gouge). So on tricky woods (or cuts) that are prone to tear-out, you're better off with the traditional tools, IMO. Good to know, thanks. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.