Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

deepest throat (not resew) table top bandsaw

Featured Replies

Hey guys I'm doing a lot of rough curve cutting for some sculptural work i'm doing, wondering who makes the deepest throat table top bandsaw? The biggest I've seen has been 14" from jet, laguna, grizzly, they all have little storage cabinets underneath but i'm assuming I can take it off? If 14" is the biggest I can find which one do you guys like best? 

 I've got a 9" 1/3 hp craftsman saw on a shop cart i built and i'd like to replace it. I don't really have room for a huge bandsaw and move currently renting so i have to move occasionally. 

All 14" bandsaws are going to have basically the same throat capacity...otherwise it wouldn't be a 14" bandsaw.

If you're needing to cut a bunch of curves deep within the field of a board, you may be better off just using a good jigsaw.  Don't waste your time with bandsaws smaller than 14".

The motor is often hanging under the saw inside of the stand on the 14" saws so you want to make sure that's not the case with what you are looking at.  Also I think you'll find that if you put the saw on top of a normal height work table type of base the table will end up too high to be usable.  You've got a 14" wheel under the table after all.  So I don't know what you're really going to gain by putting it on a different stand.

There are some older 3 or 4 wheel band saws that have a deeper throat instead of resaw ability, but they are generally considered to be pretty horrible.

The problem with the 14" saws you list is although you can take them off the stand if you put them on a bench top they will be too tall for most people.  Putting them on a similar sized stand doesn't fix the issue.  A 14" bandsaw really isn't portable in the sense of putting it on and off a bench anyway.  If you actually need it to be portable I think you are kinda stuck with the 9"-12" saws or a 14" on a mobile base.  I am excluding niche saws that would have to be found used like an Inca 3 wheeler (much better than the rest of the small 3 wheelers but still a blade breaker) or a lightweight cast aluminum saw like a Beaver 3300 which is light enough for most to horse onto and off a bench but rare to find unless you are near the Canadian border (or in Canada).    

Given your description I would go to CPO Bosch and look at something like a refurb'd JS470E.  At about $140 with the toolless blade change and roller guide it may be your answer.

There are some three or four wheeled bandsaws that have a much deeper throat than the wheel diameter would be with a two wheeler.  I am not sure if any are currently in production or not.

On the usefulness of bench top bandsaws in general...  I thought when I got a bigger saw that my little 9" Ryobi cheapie one would be unused and probably be disposed of.  I was wrong.  While it was a very poor excuse for a bigger bandsaw, it is super handy and I use it numerous times everyday for many little light duty tasks.  If it were to die I'd replace it with another bench top band saw.  It is a very poor substitute for a bigger bandsaw, but is a useful tool in it's own niche, or at least it is in my shop.

  • Author

Yeah I definitely use my jig saw for alot of those cuts, but whenever i can fit it in the bandsaw i do so as it's much faster. 

I'm thinking about getting the laguna 14/12 to replace my craftsman 9" However since it's less of a benchtop model and more of an independent stand whether it's better to just get a full sized bandsaw.. I guess a 14" is still more portable as it'll be lighter and easier to lift into the van when i move but size wise they seem pretty similar 

I bought a Craftsman 12" to use on a roof because it only weighed 65 pounds.  I also have a 24" Centauro set up for resawing, and a tricked out old Delta 14". Not including long runs of resawing, the most used saw I have now is the little one,.  It's actually a decent little saw, and exactly the same one as the Rikon, but with differently painted doors.

 I probably should just get rid of the 14", but it belonged to my Dad, and I've put more money into it than I could probably get back out of it.

Don't know if that's useful information, but don't know how much capacity you need either.

Well, I had fun digging through a Google search of "deep throat band saws." Most are well beyond a hobby budget, but they exist. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.