Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Moving into a new shop

Featured Replies

I just moved out of a house that had my first garage shop, which was a little less than 300 ft². Come April, I'll be moving into a home with a detached garage that is 715 ft², and is basically a blank slate. Just two windows, a one car garage door, and a utility door. It was built as a shop, and already has a decent amount of outlets surface mounted. The garage is cinderblock, and that's exposed on the inside.

I'm curious about thoughts on making it a better space for woodworking. I know I'll want to hang many things on the walls, and that may not be easy with cinder block? Would it be best to frame in the inside (adding insulation), and either surface with drywall or possibly 3/4" OSB, to allow anything to be hung anywhere?

I'd appreciate any suggestions for things that would be the best to focus on during move in. This will be my largest shop, so I hope to grow (maybe a lathe) in the future from what I do now. Photos of the new place during the home inspection, and my previous garage below.

d.jpg

d1.jpg

d2.jpg

Congratualtions on the new shop! I hope to be making a similar upgrade soon. Personally I would frame, insulate and sheetrock each wall. You give up a little space this way but with the size of your new space its probably worth it. You may end up having to add jam extensions to the door and windows if you want to trim everything out properly.

Cinder block is not much of an insulator and hanging everything with anchors or concrete screws would get old. Also having lighter colored sheetrock walls will improve the lighting dramatically. If there were any improvements u want to make to the electrical you would have a great opportunity to do that as well when u build out the walls.

Sent from my SAMSUNG-SM-G890A using Tapatalk

Agree with Shep, definitely want to insulate and don't forget about the garage door. I just did the same in my basement, did 2x6 walls with R19, outlets every 4' and covered with drywall painted bright white. I also did a light gray epoxy on the floor to brighten that up and protect it a bit better but that would be a fair amount of work if you need to clean oil off of the concrete first. 

Another thought that you probably have already been planning on is, like clamps, you can never have enough lighting.

  • Author

Lighting is definitely going to be a priority, though I may wait until I do the walls, to see how much brighter that makes the room. I'd love to do some LED shop lights, if the budget will allow.

I hadn't thought about painting the floor, I like that idea, too!

If you have a Costco membership, I don't think you can beat the Feit LED Shop Lights. They recently changed the SKU, but they are just as good bang-for-the-buck as ever. Depending on local subsidies, you can usually find them for between $20 and $30, for 3700 lumens. They can be chained together off any 110 outlet (like the one for the garage door opener), or Edison socket if you use an adapter.

For the walls. Definitely look at framing them in. Don't spend more than you have to on insulation, unless you plan to live out there, R-13 will be fine. 

Hard to tell from the pictures, but if your ceiling/roof isn't insulated, I'd start there before tackling the walls.

My general advice would be to move slowly. Get specific work areas set up before just throwing all your stuff to the corners of the shop. Stuff will expand to fill any space it is in, and you can quickly feel like the expansion didn't actually help. I ran into that when I first moved from a 1-car to a 2-car space (now I'm back down to 1-car).

 

29 minutes ago, k_lem said:

Lighting is definitely going to be a priority, though I may wait until I do the walls, to see how much brighter that makes the room. I'd love to do some LED shop lights, if the budget will allow.

I hadn't thought about painting the floor, I like that idea, too!

It isn't a huge difference with just the gray but I added a clear gloss top coat and that helped reflect more light around. Mostly, however, I just didn't want to be staring at bare concrete all day.

Another option over sheetrock is T1-11.  This would be my personal preference over sheetrock and definitely over OSB.  I am sure there is a price difference but in the long run I think it just makes a nicer looking surface that you can still paint a light color and hang anything anywhere.

4 minutes ago, Chet K said:

Another option over sheetrock is T1-11.  This would be my personal preference over sheetrock and definitely over OSB.  I am sure there is a price difference but in the long run I think it just makes a nicer looking surface that you can still paint a light color and hang anything anywhere.

Depending on your source, T1-11 can be 2-4 times as expensive as OSB or Drywall. I agree it's a nicer surface though.

If you go the drywall route, I'd recommend spending the extra dollar or so on getting the mold-resistant stuff.

Unless you just like hanging and finishing the muddled joints on drywall I would  look at 1/2" or 5/8 OSB and plan in renting an airless sprayer to paint it. Plan on plenty of paint, it can really soak it up. A vapor barrier behind the OSB and leaving a 1/2" gap at the bottom might prevent moisture problems down the road.  If the outlets are mounted to the concrete block they might need to be removed and reinstalled.

  • Author

It looks like for my local Home Depot T1-11 is $25 a sheet. My total wall space is ~95 linear feet, so that would be 24 sheets, or $600. I'll have to weight the benefits for that, vs nicer lights. Maybe give certain walls a priority. I wouldn't mind not working with drywall, I hate dealing with it.

Sheetrock is a lot of work.  I set apart some space in what used to be my garage.  I used plain ol' OSB to line the walls.  That way if it gets damaged, I don't have to fill in dents and dings.   I might get ambitious one day and paint it.

2 hours ago, wdwerker said:

Unless you just like hanging and finishing the muddled joints on drywall I would  look at 1/2" or 5/8 OSB and plan in renting an airless sprayer to paint it. Plan on plenty of paint, it can really soak it up. A vapor barrier behind the OSB and leaving a 1/2" gap at the bottom might prevent moisture problems down the road.  If the outlets are mounted to the concrete block they might need to be removed and reinstalled.

I definately agree with OSB walls over sheetrock. I can drop a screw in anywhere to hang about anything I want and I like having stuff wall mounted near where it is used.

Plus 7/16 OSB is under $12 around here. I would think about renting a drywall lift too. When you step up to 23/32 it's closer to $20.

Another thing you have going for you, judging from the pic of your current shop is the fact that you look like you're fairly organized. I could give you some pointers about being organized, but it would be in the wrong direction:(! Good luck and enjoy your new digs!

  • Author
16 hours ago, K Cooper said:

Another thing you have going for you, judging from the pic of your current shop is the fact that you look like you're fairly organized. I could give you some pointers about being organized, but it would be in the wrong direction:(! Good luck and enjoy your new digs!

The size of the shop was definitely the driving force for my organization. If things didn't have a place, I wouldn't have been able to get anything done! It was a very gradual increase of tools over the past 8 years, so I was able to improve how I stored things bit by bit. I look forward to the space I'll gain, but I think I'll try to keep a lot of the same mindset.

I also have small children so a lot of my garage time is in small chunks; I can't be spending a lot of time looking for things. My apprentices don't allow for that! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.