lewisc Posted March 22, 2017 Report Posted March 22, 2017 A friend saw my cutting board at home and asked If I could make him one. It's the biggest one I've done at approx 700mm long, 350mm wide and 50mm thick. It's a monster that should last 2 lifetimes. I was told the timber is Brushbox - an Aussie Hardwood - there's so much variation in it that I'm not sure. It might have had some other species thrown in. Either way its heavy and dense. The drum sander was a life saver. This is the first I've made with a drum sander. It's pure sanding bliss. Once I had cut the strips, I noticed a few cracks in the end grain. Would Epoxy be fine as a filler? I was reading a few threads that mentioned it. Anyway, it's in the clamps at the moment and I'll get back to sanding tomorrow. 2 Quote
mrrhode04 Posted March 22, 2017 Report Posted March 22, 2017 You can either use Titebond 3 with some of the sawdust as a home made filler or epoxy. All my cutting boards I use epoxy because it gets further in to the crack and completely fills it. Quote
wdwerker Posted March 22, 2017 Report Posted March 22, 2017 You can put a shop vac hose under a crack and suck the glue/ epoxy deep into the crack. Looking good ! It's fun to see some unfamiliar woods being used. Quote
sheperd80 Posted March 22, 2017 Report Posted March 22, 2017 What am interesting board, thats some cool looking end grain. I wana see it with some finish. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
Popular Post lewisc Posted March 24, 2017 Author Popular Post Report Posted March 24, 2017 And done! Almost. A couple more coats of mineral oil/beeswax over the weekend and it will be good to go. I've epoxied the cracks, sanded it up and put a round over on the edges. A few feet on the bottom stop it sliding around. I need to find some scales because it's gotta weight 10kg. I'm almost glad it's not mine as it will be a PITA to clean. 7 Quote
Brendon_t Posted March 24, 2017 Report Posted March 24, 2017 I really like the board and pattern. Those colors work well together Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.