Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Little Cyclone (best title I could think of)

Featured Replies

Picked this up new at an estate sale. Got the canister shop vac from a thrift store. They fit together nicely on a small cart.

The 2.5" connector isn't a problem when it's on the table saw. It picks up dust with ease.

With an adapter to 4", on the jointer it's ok if the cuttings are small. That means edge jointing works but not so well with the larger pieces, like 4"-6".

One test I saw online showed the bucket collapsing when using a higher powered​ vacuum. In that light it is probably a good tool to use in the small shop or if you have a dedicated application but once you start jointing or planing larger pieces then it's not enough.556ed8c8201ad9def8cf6f02d1bb2264.jpg

 

Sent from my MotoE2(4G-LTE) using Tapatalk

 

 

I have the same type of cyclone and don't seem to have any issues with it thus far. I have a standard Ridgid vac attached to it and it hasn't collapsed it at all. I wish it was more mobile but for the price it far exceeds my expectations.

 

Sent from my SM-G930V using Tapatalk

 

 

Cyclones don't play well with fluffy shavings , that's why they call them dust collectors. Maybe the big ones do better. My vac pulls fluffy shavings right through the dust deputy, but they don't pack the filter like dust does .

I started out with something very similiar and still use it on my router table as it fits the port. Works great.

Get yourself a big ridgid vac & it'll handle a 6" jointer no problem. They're cheap too.

started off with one of those same set ups but realized my little basement shop was't so little 

 

  • Author
Get yourself a big ridgid vac & it'll handle a 6" jointer no problem. They're cheap too.

 

I have one that I will try with it. Good suggestion. Tx.

 

Sent from my MotoE2(4G-LTE) using Tapatalk

 

 

16 hours ago, drzaius said:

Get yourself a big ridgid vac & it'll handle a 6" jointer no problem. They're cheap too.

I'm not sure what vac you're talking about but the long fluffy shavings from face jointing a 5" board at anything but a snail's pace would make my big Ridgid vac tap out in seconds. 

Many jointers have an open chamber under the cutter head directing the shavings to the hose port or dump out chamber. That chamber may as well be a cavern as the fast airflow from the vac will be all but worthless once opened to a chamber that big. It may pull in anything that happens to float right in front of it but good luck pulling enough air from around the cutter head to actually be collecting dust in a meaningful way.

  • Author

I replaced the old shop vac with my newer 16 gal. Ridgid. Certainly more powerful. Worked fine on the planer right off. Should be no problem on the jointer. Probably a project next weekend to display its capacities. But it looks good right now.

 

As long as the system is sealed well the Oneida​ does handle big pieces well.nit just the planer but hand plane shavings, too. They drop right out, into the bucket.

 

Right now I am tempted to attach 2 buckets for a greater volume capacity. If I do much at any time it fills up quickly.8ec402180e172055ca75902eebd22942.jpg

 

Sent from my MotoE2(4G-LTE) using Tapatalk

 

 

At that point of adding multiple cyclones in series, haven't you knit together a system inferior to an actual purpose made DC at the same cost

7 hours ago, Brendon_t said:

I'm not sure what vac you're talking about but the long fluffy shavings from face jointing a 5" board at anything but a snail's pace would make my big Ridgid vac tap out in seconds. 

Many jointers have an open chamber under the cutter head directing the shavings to the hose port or dump out chamber. That chamber may as well be a cavern as the fast airflow from the vac will be all but worthless once opened to a chamber that big. It may pull in anything that happens to float right in front of it but good luck pulling enough air from around the cutter head to actually be collecting dust in a meaningful way.

Don't know the model off hand, but it's the biggest one with the plastic bin.

Mine is a General Int. 6". The ridgid vac & DD was able to keep up with very little dust of shavings getting out into the wild. The week point was just at the port on the jointer. That's where it would occasionally start to plug if there were heavy cuts.

  • Author
15 hours ago, Brendon_t said:

At that point of adding multiple cyclones in series, haven't you knit together a system inferior to an actual purpose made DC at the same cost

Not two cyclones. Just increasing my storage capacity beneath it.

I also added a remote control power switch. But electric motors put out so much hash into the air that it works best when the sensor/switch is mounted away from the motor. Initially I put it beside the vac and it didn't like to turn off -- too 2-4 attempts until it would hear the signal. So I just moved it to the central power location on the wall and it works like a champ. And it's a lot easier than walking back and forth to switch the thing each time.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.