Popular Post chashint Posted May 31, 2017 Popular Post Report Posted May 31, 2017 Hi, The box sides are walnut and the joinery is finger joints. The top and bottom of the box are flamed box elder and that float in dados. The bottom divider is removable and it is made out of walnut. The joinery for the divider is simple butt joints. The top tray sides is walnut and the corners are mitered with splines. The bottom of the top tray is flamed box elder and it is glued into a rabbet. The divider in the top tray is walnut and it is not removable. Right now the finish is boiled linseed oil, in a day or two I will either wax it or add a coat of wipe on polyurethane. Thanks for taking a look at my box. 7 Quote
drzaius Posted May 31, 2017 Report Posted May 31, 2017 That's a great looking box, and I love the 2 "eyes" staring up from the bottom of the tray. 1 Quote
chashint Posted May 31, 2017 Author Report Posted May 31, 2017 Thank you. I had not noticed the eyes before, but you are right.....they are right there staring at me. Quote
drzaius Posted May 31, 2017 Report Posted May 31, 2017 It's like they're being sneaky, peaking out from behind the divider. I don't think I'd feel comfortable getting undressed around that box if the lid was open Quote
wtnhighlander Posted May 31, 2017 Report Posted May 31, 2017 Very nice! Is the knob turned from box elder, also? Quote
Eric. Posted May 31, 2017 Report Posted May 31, 2017 "Flamed" is a curious word to use for that...did someone tell you that or did you come up with that description yourself? A lot of the grain character and color you're seeing there is actually "ambrosia," which is caused by the ambrosia beetle and the fungus they leave behind. It's the same you often see in maple. Box elder is in the maple family. The giveaway is the little side-by-side holes surrounded by the greenish streaking. I'd be curious if "flamed" is a typical descriptor of ambrosia in your part of the country, or if there was just some miscommunication or misunderstanding going on. Usually "flame" is used to describe a type of curl figure, most often found in birch. Quote
gee-dub Posted May 31, 2017 Report Posted May 31, 2017 Nicely done. Interesting material with a lot of pop. I think boxes are fun since they can include a lot of joinery and details in a small form factor. Quote
Gixxerjoe04 Posted May 31, 2017 Report Posted May 31, 2017 1 hour ago, Eric. said: "Flamed" is a curious word to use for that...did someone tell you that or did you come up with that description yourself? A lot of the grain character and color you're seeing there is actually "ambrosia," which is caused by the ambrosia beetle and the fungus they leave behind. It's the same you often see in maple. Box elder is in the maple family. The giveaway is the little side-by-side holes surrounded by the greenish streaking. I'd be curious if "flamed" is a typical descriptor of ambrosia in your part of the country, or if there was just some miscommunication or misunderstanding going on. Usually "flame" is used to describe a type of curl figure, most often found in birch. I've always seen people call it flamed box elder(mainly turners) just because of the red streaking, which isn't always caused by the ambrosia beetle from what I've seen. A guy who ran another woodworking site and ran a mill down in Texas always had the best flamed box elder, if you google flamed box elder his site comes up I believe. I've found box elder trees with the red flame but doesn't have the beetle marks, and it usually fades/dulls pretty quick and doesn't look nearly as good as what's caused by the ambrosia beetle. Of course this is just all personal experience so take it with a grain of salt haha. 2 Quote
Eric. Posted May 31, 2017 Report Posted May 31, 2017 37 minutes ago, Gixxerjoe04 said: I've always seen people call it flamed box elder(mainly turners) just because of the red streaking Ah, yes, that makes more sense. Yeah, too bad the red always turns to brown. Quote
Gixxerjoe04 Posted May 31, 2017 Report Posted May 31, 2017 2 minutes ago, Eric. said: Ah, yes, that makes more sense. Yeah, too bad the red always turns to brown. Yea I've seen people say to use some UV protecting finish to slow that down, of course it seems all the pretty wood turns brown with time, mother nature is a cruel $%^# haha. Quote
Eric. Posted May 31, 2017 Report Posted May 31, 2017 "Slow down" being the key words. You can't stop Mother Nature. She do what she want. Quote
RichardA Posted May 31, 2017 Report Posted May 31, 2017 I don't know how to bring an old thread to here. But on July 16, 2016 I showed a piece of box elder that I called firewood. Title is "Now, that's what I call Firewood. Check it out, and you'll see why it's called "flame". Quote
RichardA Posted May 31, 2017 Report Posted May 31, 2017 Thank's Ice. You're gonna get a kick outa this: I don't have a clue what that stuff means. Quote
shaneymack Posted May 31, 2017 Report Posted May 31, 2017 Awesome looking box ! Nice work. I really like the box elder. Sent from my SM-N910W8 using Tapatalk Quote
chashint Posted June 1, 2017 Author Report Posted June 1, 2017 I bought the wood from Red River Maple Ltd (Powder Creek Sawmill ?) at the end of June 2016. Unfortunately at this time the company appears to have disappeared. The reason I called it flamed box elder is because that's what the seller called it. I do not know what the exact variety of tree the wood actually comes from. The wood I have has bug holes all through it very much like ambrosia maple I bought the wood green and this is the first project I have used it in. I am disappointed to learn the streaks will turn brown in a short time. The knob is box elder too. I made it by whittling the end of a 1x1x3 inch chunk small enough to fit the chuck of my drill and then spun it on the disc sander to get it round, then I whittled and chiseled the stem into a roundish shape. There's not a good picture of the splines in top tray but they are also box elder. Many thanks to everyone for posting. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.