Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

A much smaller work bench

Featured Replies

  • Popular Post

 

Now that the Roubo is basically done, I can start into a first project with it. My daughter kept asking when I was going to build her work bench throughout the build. She informed me this week that we could start her bench now.

 

 

I'm not working off plans for this one, more a see how it goes approach. The basic idea is that the bench will be around 15"x30", and about 20"high. The top will be solid wood around 1 1/2" thick, and the legs are going to fold up. This will allow me to fold it up and put it away under my work bench when she's not using it.

 

 

The wood I'm using for this is the runners from some sheet metal pallets. I've had these kicking around for ages, and she'll appreciate a little more "character" than I'd want in a furniture project.

 

 

I started by cutting the pieces for the top to rough length. I'm not worrying about nail holes (more on that later) but I'm cutting off any really bad splits. I don't want anything she could get splinters from. A lot of this build will be by hand, so she can be in the shop with me helping.

 

 

5d43a98e82dfa05aacdb503d08fcce4a.jpg

 

 

This didn't take long, but the board edges are really rough.

 

 

2d7c66fe76c1413e4edbb09d276632b8.jpg

 

 

Last night I went on my own and edge jointed and ripped them on the table saw. I was shooting for keeping maximum width, without worrying about them being the same. I was reasonably happy with how they came out, if a little narrower than I originally planned. I had previously skip planed these before they went on the lumber rack.

 

 

2fec163600df5d2052f02df30efbed2e.jpg

 

 

I'm not entirely sure what kind of wood I've got. The lighter wood is hard maple, based on how it cut, but the other one I'm just not sure. It's the same type I made some frames from before.

 

 

I'm going to try to get things ready for a glue up today, maybe put in a few dowels for alignment. My daughter loves gluing things, so she'll get to help here. She wants a contrasting strip in the middle of I can find something.

 

 

20 minutes ago, SawDustB said:

I'm not entirely sure what kind of wood I've got. The lighter wood is hard maple, based on how it cut, but the other one I'm just not sure. It's the same type I made some frames from before.

Is it really light and soft?  Just looking at the one pic, looks a lot like WRC.  Second guess would be some kind of fauxhogany.  Lauan-ish.

You're a good daddy.  I need to get my kids in the shop more.  Never seems to be a good time for it.

  • Author
  • Popular Post
Is it really light and soft?  Just looking at the one pic, looks a lot like WRC.  Second guess would be some kind of fauxhogany.  Lauan-ish.

You're a good daddy.  I need to get my kids in the shop more.  Never seems to be a good time for it.

It's definitely not WRC, it takes more than looking at it to make a dent (and it's missing the smell). It seems to be about the same hardness as birch would be, and it machines pretty well. I had wondered about lauan... Looks like it's from a pretty small tree, so who knows.

 

Honestly, I wouldn't get shop time a lot of weekends (at least in the day) if I didn't let my daughter in there. It's a part of why I built the Roubo and I'm trying to find hand tool methods for some tasks where it's reasonable. She's really interested at this age (almost 4), so as long as it's safe I figure why not encourage it. This will give me somewhere I can let her paint or glue random things together while I work on a project.

This is really cool, Brian. I love that she is giving input on how she wants her workbench. Hopefully she doesn't ask for ebony for the contrasting strip !

 

Sent from my SM-N910W8 using Tapatalk

 

 

  • Author
This is really cool, Brian. I love that she is giving input on how she wants her workbench. Hopefully she doesn't ask for ebony for the contrasting strip !

 

Sent from my SM-N910W8 using Tapatalk

 

 

I'm safe there, but she recently found out about purple heart

50 minutes ago, SawDustB said:

I'm safe there, but she recently found out about purple heart . If she doesn't go for the walnut on the wood rack we might be making a trip to the hardwood dealer.

Show her a piece of purpleheart that's been laying around for a year, and see if she's still excited. :)

What a great idea and build!! I'm sure she will be one happy camper when she gets to use it.

 

  • Author
  • Popular Post

 

We didn't get too far today. I drilled for dowels and we glued up one side. She was in charge of the roller:

 

 

c55115f2dfbab7111753a25a1262e3e5.jpg

 

 

I was still putting Roubo amounts of glue, so there's way too much. It should fill in some minor checks though. I wasn't thinking about clamping strategy, so we'll have to let the first side dry a little before doing the second.

 

 

365bb699abcb94e3b79ecbf11f72b4c6.jpg

 

 

  • Popular Post

Planer step stool, that is amazing.

 

Sent from my SM-N910W8 using Tapatalk

 

 

  • Author
  • Popular Post

We've used the planer before. It's probably not the best thing for it, but she's not that heavy. She's pretty good with the glue roller, but if you don't watch her she'll glue everything. She also wanted to know when we were going to put on the second coat [emoji6].


  • Author
  • Popular Post

We got the maple half of the top glued up yesterday. It didn't come out quite as well as the mystery wood, so there's some twist in it.

 

I spent some quality time tonight flattening both pieces. The maple was a pain, but the other wood planes like a dream. I've never seen such perfect shavings from my jointer plane.

 

84a3789b7b7f7ca699f3417d9b8cd82e.jpg

 

Next up I'll run them through the planer again and mill the piece of cherry that's going in the middle. I jointed one face and edge tonight, but the planer's too noisy with the kids in bed. I'm planning to put some notches to allow for stashing a couple of tools in the middle. That will be done with some dados in the cherry.

  • Popular Post

Really cool project Brian. You'll remember these years forever!

On 7/15/2017 at 7:10 AM, Eric. said:

I need to get my kids in the shop more.  Never seems to be a good time for it.

Needs to be REAL soon as they will be 15-16 before you know it and you will be replaced by their opposite sex. Yeah, I know, I said my daughter and granddaughter couldn't date until they were 25 yo too:wacko:! 

14 hours ago, K Cooper said:

Really cool project Brian. You'll remember these years forever!

Needs to be REAL soon as they will be 15-16 before you know it and you will be replaced by their opposite sex. Yeah, I know, I said my daughter and granddaughter couldn't date until they were 25 yo too:wacko:! 

This is mostly true, but I was lucky with my oldest daughter who is the one that took a liking to woodworking, we did our last woodworking project together when she was a junior in college. 

  • Author

I had a chance to plane all the pieces to thickness. After doing that with the piece of cherry, I put a couple of wide dados in it and ripped it in half. By gluing it back together, this formed the slots for holding tools. I've edge jointed all the pieces, so they're now ready to be glued into a single top. I'll have to get my helper involved for that

  • Author

We got the top glued and in the clamps. I decided we'd have the best luck doing it on top of my bench so it would come out flat. My daughter spread glue for me again and it went together OK. I kept the center strip a bit proud for now so we can plane it flush afterwards. She also wanted to add a couple of little c clamps on the end that weren't doing anything

  • Popular Post

Hey, its her bench.  If she feels the need for a clamp that you obviously overlooked then kudos to her.  I mean it is her bench, correct? :D

I keep coming back to look at this.  This is such a great shared activity for you both ;-)

  • 2 weeks later...
  • Author
  • Popular Post

It's been a while since an update. We were on vacation, so we got back to it today. I squared up the leg blanks and cut them to length. I was pretty happy with the final height (as was my client). I also cut the top to length as well, staying as long as I could.

c29123f74e5e54c42ddf59d5887a6778.jpg

 

I think I've got the leg folding worked out. I made two brackets for each leg, which will have a bolt going between them. There will also be two stretchers between the front and back legs. Here's the layout on the underside (except stretchers, which I'll cut to fit).

 

a24924c3dcf99fdaca8d510730bbdd00.jpg

 

I need to attach the brackets with glue and dowels, and drill the through holes for my bolts. The inside corner of each leg then has to get rounded to allow them to pivot. So far so good. This build is definitely more about function than form.

 

I also had some help getting cleaned off after using the table saw. [emoji3] And yes, we're both wearing matching Batman shirts. She decided what we were wearing (and her little sister has a matching one too).

 

6acb64d9e096b489e8c8529863a82c25.jpg

Very cool!  Always cool to see the kids involved!

  • Author
  • Popular Post
11 hours ago, Chet said:

This has been fun to watch.  The smiles on her face have got to be worth it.

It's been a fun build. She's getting impatient though - I think she thought we'd be done in a day.

The alignment of the folding legs was giving me some grief yesterday so I gave up on it during the day and took my daughter to the park, and tackled it last night myself. The way I've got it set up I'm running a bolt through and I've threaded the inner wood bracket, with the intention of putting a nut on the back to lock the spacing. The other issue I think is that my table saw was slightly off of 90 when I ripped some of the pieces. I was able to get two of them aligned properly and glued on. The legs can be in their folded orientation:

20170730_204838.thumb.jpg.a49f1f0f848b76db8f8c19104cffcdaa.jpg

And they extend properly to be upright. I only rounded one corner, so the other one effectively acts as a stop to keep them from bending the other way.

20170730_225809.thumb.jpg.8b6a9e2575a75b45b1484f2146129347.jpg

The other legs need to be spaced from these, so I let the glue dry overnight and I may see about attaching the other two today. I haven't entirely worked out how we'll keep the legs extended - any suggestions? The left pair and right pair of legs will each have a stretcher going between them, which I'm thinking will be part of that solution.

My daughter informed me I should have gotten her out of bed last night to come help me glue these on, but she was excited to see legs on it. Once I get the others on I'm going to let her go to town with a small detail sander to clean it up.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.