Recommended Posts

Posted

BTW, I don't know if you're set on the 19-38, but they introduced a new 16-32 at AWFS that has some very nice features. Moved the drive motor to the rear so it pulls rather than pushed the conveyor, added turbo fan blades (static) to the dust port to assist in dust control, and the optional extension tables now fold down to reduce the footprint when it's not in use. I think they said it would ship in September.

Posted
8 minutes ago, Mick S said:

BTW, I don't know if you're set on the 19-38, but they introduced a new 16-32 at AWFS that has some very nice features. Moved the drive motor to the rear so it pulls rather than pushed the conveyor, added turbo fan blades (static) to the dust port to assist in dust control, and the optional extension tables now fold down to reduce the footprint when it's not in use. I think they said it would ship in September.

Check my post again mick ;)

 

Acme it is, thanks fellas. 

  • Like 1
Posted
37 minutes ago, ZombieMonkey said:

Maybe I'm blind, but is acme doing the pre-order online? I saw other vendors doing it but I was wanting to order from them.

They are, as of this morning.  Do a search for "16-32" and you'll find it.  When I went to the drum sander section it wasn't there.  Rockler is the only other vendor I've seen have it so far, but they charge shipping and tax.

  • Like 1
Posted
2 hours ago, bleedinblue said:

They are, as of this morning.  Do a search for "16-32" and you'll find it.  When I went to the drum sander section it wasn't there.  Rockler is the only other vendor I've seen have it so far, but they charge shipping and tax.

Thank you!

  • Like 1
Posted

I'm starting to look at getting a drum sander and was pretty much set on the 19-38.  Is there a significant reason to hold out for the 16-32 that I'm not seeing aside from the $200 savings?  Thanks!

Posted
On 7/22/2017 at 9:04 PM, Mick S said:

BTW, I don't know if you're set on the 19-38, but they introduced a new 16-32 at AWFS that has some very nice features. Moved the drive motor to the rear so it pulls rather than pushed the conveyor, added turbo fan blades (static) to the dust port to assist in dust control, and the optional extension tables now fold down to reduce the footprint when it's not in use. I think they said it would ship in September.

 

1 hour ago, fastev said:

I'm starting to look at getting a drum sander and was pretty much set on the 19-38.  Is there a significant reason to hold out for the 16-32 that I'm not seeing aside from the $200 savings?  Thanks!

Check Micks post above. The 16-32 also has a built in digital gauge, the 19-38 doesn't.  It also has a quick adjustment lever so you don't have to crank away at a handle for 10 minutes to adjust from three inches to an eighth of an inch when making big adjustments.   Above all though, size should be the deciding factor I think.  If you have the room and the extra $200, I'd still get the 19-38 just for the capacity.

Posted

Wow I hadnt even heard that the 16-32 was announced! Awesome, that looks perfect for my needs! Love that the outfeed tables fold and there is a built in DRO! Ill wait till AcmeTools gets that one and use a coupon to pick that up!

Posted
3 hours ago, ben_r_ said:

AcmeTools and wait for a 15-20% off coupon/sale. They do the a few times a year.

Whaaaaat?  Crap.  15% off would be significant, I didn't know they did such sales. Can anyone confirm supermax is not restricted out of these sales?  

Posted
16 minutes ago, bleedinblue said:

Whaaaaat?  Crap.  15% off would be significant, I didn't know they did such sales. Can anyone confirm supermax is not restricted out of these sales?  

They arent. Ive added 19-38 to cart and applied the coupon on numerous occasions but always ended up buying something else. Just sign up for the mailing list and youll get an email when they have them.

Posted
14 minutes ago, B1rdhunter said:

10 percent is the best I have seen on Supermax at Acme. Got my 25-50 at 10 off in the spring sale.

They just did a 15% a couple months ago. They send a 15% off with a cap on your birthday if you have an account with them. They did a 20% off last Black Friday and a bunch of us jumped on the 12" Bosch Glide for $480 shipped.

  • Like 1
Posted
2 hours ago, bleedinblue said:

My birthday is next month.  10% would pay for the infeed and outfeed tables I didn't get.  Would be well worth canceling the order and re-order in, if I had to. 

Or you can buy the 19-38 with the discount and pay what you were gonna pay for the 16-32 at retail. :D  Rationalize. :)

The quick release is a cool feature...wish I had that.  But I personally couldn't care less about a DRO.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined