Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How would I achieve this finish using dyes? (Newbie)

Featured Replies

Hey guys, I'm fairly new to wood working, I've made a few things but never stained anything before (or dyed wood). I want to make a small box (roughly 4x6x3), but it has to have a finish like THIS .

I believe they got that finish by using wood dye, and after researching about wood dyes, I think I'm in over my head a little. There are all these different types of dyes, that use solvents, etc...

I think it would make sense to at least use the same wood that they used for that ring (Poplar) for my box, but do any of you guys have any suggestions on how I would achieve that finish? And which dyes should I use?

Just go to the lumberyard and pick your favorite species, build, forget stain.

The finish on the ring is a mirror finish.  That is, a film is applied and ultra fine sanded / polished to a glass-like surface.  This can be a rather advanced finishing technique.  Is the glass-like finish what you are after or just the dark glossy look?

  • Author
1 hour ago, gee-dub said:

The finish on the ring is a mirror finish.  That is, a film is applied and ultra fine sanded / polished to a glass-like surface.  This can be a rather advanced finishing technique.  Is the glass-like finish what you are after or just the dark glossy look?

The color is the main thing I'm after, that exact color on that ring was the one I envisioned when I came up with the idea for my box. I didn't even know if it would be possible to get a color like that. I was looking up exotic woods to see if there was any wood that had a color close to it, but wasn't finding anything. Then I found that ring by chance and read the description and seen that they used wood dye. So that's where I'm at now...

 

Also, If all goes well, the box will be put on display somewhere in the house. I also don't want the color to fade if it's in indirect sunlight (light from a window), so if I get color down right, would it be alright to put something like this on to finish it?

Poplar is some pretty fugly stuff even with color added to it.  Just grab some walnut and start building.  I can't see the wood in that ring clearly enough to even know what you're after really.  Just looks like dark wood.  Too small of a sample.

  • Author
15 minutes ago, Eric. said:

Poplar is some pretty fugly stuff even with color added to it.  Just grab some walnut and start building.  I can't see the wood in that ring clearly enough to even know what you're after really.  Just looks like dark wood.  Too small of a sample.

I think this is a bigger picture

Green-And-Black-Poplar-Wood-Ring_SKU2162.jpg

Wenge is very dark and might give you the look you are going for. If you are a baller, ebony would work. Depending on how big of a box you are looking to build, you just might need to take a second mortgage out to pay for it.

 

 

Sent from my iPhone using Tapatalk Pro

If you want something dark and pretty and special...just grab a piece of rosewood.  You might be able to get poplar dark but it ain't ever gonna be pretty.  That's all I have to say about that.

  • Author
6 minutes ago, Eric. said:

If you want something dark and pretty and special...just grab a piece of rosewood.  You might be able to get poplar dark but it ain't ever gonna be pretty.  That's all I have to say about that.

Aren't stains and dyes additive? Especially if I want to still see the wood grain? Rosewood would have a reddish tint to it and would be harder to get any greens into it, wouldn't it?

Totally off topic and I apologize to the OP for the hijack, but the Shoptalklive guys were talking about how bass wood is a superior secondary wood to poplar, because poplar is, well, butt. Never occurred to me to use bass wood, but it certainly does look better. I will have to try it out.

 

 

Sent from my iPhone using Tapatalk Pro

Aren't stains and dyes additive? Especially if I want to still see the wood grain? Rosewood would have a reddish tint to it and would be harder to get any greens into it, wouldn't it?

Poplar can have some green streaks in it. It looks terrible, imho, but it is the only wood I can think of that regularly features green. I also think that if you scaled whatever they did with that ring up to the size of a box, it would not look good. Poplar is just an ugly wood and the more of it you can see, the worse it is going to look. Maybe there are some people out there who are wizards with dyes who can make it work, but if it were me, I would just get a nice price of wood and let its natural color show.

 

 

Sent from my iPhone using Tapatalk Pro

21 minutes ago, Dknapp34 said:

Totally off topic and I apologize to the OP for the hijack, but the Shoptalklive guys were talking about how bass wood is a superior secondary wood to poplar, because poplar is, well, butt. Never occurred to me to use bass wood, but it certainly does look better. I will have to try it out.

I disagree with the shoptalklive guys (whoever they are).  Poplar has been used as a secondary species since the beginning of time and its known for its relative stability.  It's ugly as sin but for drawer sides who cares.  It doesn't look quite as bad if you can get clean, white poplar.

I haven't messed with basswood much but I don't see it in 4/4 lumber very often.  We have huge 16/4 chunks of it and carvers use it quite a bit.

I'll stick with poplar as my go-to economy secondary wood.

 

OP...rosewood comes in a spectrum of colors.  It varies from species to species and board to board.  I have some cocobolo that's almost as black as ebony...with stripes of orange and yellow and purple in it.  And I have some cocobolo that's a creamy orangish red color.  It varies.

My point is only...I'm not sure why you're so hung up on poplar.  If you want something that's gonna LOOK GOOD...look elsewhere.  Poplar is a paint grade or secondary species.  Utilitarian.  Not what you want when aesthetics is a factor.

 

FWIW, Shoptalklive is the Fine Woodworking podcast (the second best woodworking podcast, obv). I think it was Matt Kenney who said he prefers basswood.

 

 

 

Sent from my iPhone using Tapatalk Pro

 

2 minutes ago, Dknapp34 said:

FWIW, Shoptalklive is the Fine Woodworking podcast (the second best woodworking podcast, obv). I think it was Matt Kenney who said he prefers basswood.

Well I don't have a podcast so I don't have as much street cred :rolleyes: but he's arguing against hundreds of years of history. :)

  • Author
2 hours ago, Eric. said:

 

OP...rosewood comes in a spectrum of colors.  It varies from species to species and board to board.  I have some cocobolo that's almost as black as ebony...with stripes of orange and yellow and purple in it.  And I have some cocobolo that's a creamy orangish red color.  It varies.

My point is only...I'm not sure why you're so hung up on poplar.  If you want something that's gonna LOOK GOOD...look elsewhere.  Poplar is a paint grade or secondary species.  Utilitarian.  Not what you want when aesthetics is a factor.

As odd as this may sound, if the piece looks "ugly"... it adds to my purpose. I'll probably just end up getting some poplar and trying different dye combinations on small pieces, and try to get as close as I can. 

Not to sound offensive in any way, but it seems like using wood dyes isn't widely common, and I probably won't get too many answers to help me out. I just have to try it myself I guess. 

Dye is commonly used but using it on poplar is kind of a silk hat on a pig.  It just doesn't make much sense.  There are plenty of beautiful wood species out there that you don't have to add any color to.  Usually dyes are used to enhance the color of wood, not to completely change it.

  • Author
4 minutes ago, Eric. said:

Dye is commonly used but using it on poplar is kind of a silk hat on a pig.  It just doesn't make much sense.  There are plenty of beautiful wood species out there that you don't have to add any color to.  Usually dyes are used to enhance the color of wood, not to completely change it.

Which kind of justifies the use of poplar. Besides poplar the only other wood I came across that has any natural green is verawood (if left out in the sun), but that's an exotic wood and would be expensive to buy boards, I really couldn't even find anywhere that sell boards. If I picked any other wood, I'd need to completely change it's color.

I know it seems weird but there is a complete significance for my box to be that color, if it isn't that color.... there's no point in making it.

I'm not against other woods, I've made some stuff with pearwood that came out beautifully, no stain needed (just sealed it), and some stuff with cherry wood. But for this project, that color is absolutely needed.

49 minutes ago, u00drk1 said:

I know it seems weird but there is a complete significance for my box to be that color, if it isn't that color.... there's no point in making it.

Can you explain the significance so I can stop beating the dead horse?

 

Other than the color from the ring not looking the same on a larger scale piece, it will also be difficult to achieve that mirror finish on poplar, without some help. A friend of mine uses a vacuum or pressure chamber to force dye through and through his turning blanks, and also to stabilize them with resin. I think this process would be ideal, if you want the visual grain texture of poplar, along with color that won't sand off, and a surface that will accept a high polish. Just beware that the resulting hybridized material will loose the feel of natural wood.

 

It is very durable, however, and the color is quite fade-resistant.

 

Look for someone that turns pens or duck calls. They may have the equipment to produce the materisl, or know a local source that does.

General Finishes makes a good line of dyes. Any samples you make need to be prepared with planing & sanding with several grits ending in 180 or 220. An uneven or poorly prepped board will take the color awkwardly and then your box might come out differently.

Study the color picture on the mans hand closely. I would use some medium green poplar for the box and samples. The dark dye could be a really dark brown or possibly black . You can thin the dye out with a reducer that General sells. Measure carefully so you can reproduce the successful level of dilution.

What wtnhighlander said. It's resin, dye and a pressure pot. That's how you get the colors you are looking for.

 

Look up Tim Yoder and NZ Woodturning on YouTube. They provide step by step instructions for the process.

 

Another source is TurnTex. They make resin and dyes for this. It's a generally a turners thing to make dye stabilized blanks, but there is no reason you can do it for box making.

 

The species isn't that important which is why poplar was used. You can ignore the devolves discussion about it in this thread. Just a note, that devolving will happen any time you ask a question about poplar that isn't a for a dust frame in a chest of drawer or about dyeing woods. Fact of the forum. Don't let it discourage you here.

 

That mirror polish will be tough to do if you haven't done finishes like that before. Marc has a WoodWhisperer Guild build for a humidor. That build finishes with a high polish but you are looking to go even further. A buffing wheel might be needed for that.

 

What you want to do is ambitious but there's no reason you can't do it. Just take your time and remember it's only a bunch of steps. Take them one by one and you'll get it done!

 

 

Sent from my iPhone using Tapatalk

The ring has a base dye of green then black or whatever dye over top. Its a technique used on a wood lathe for finishing and is buffed in. This will be difficult to reproduce on a box. https://www.youtube.com/watch?v=mhxoEAMXtPE

Get to 11:12 in vid...this will get your brain around the concept. I know this is figured wood in the video and I have done this technique before, but its a lathe thing not a technique for a box. But, get some dyes, maybe an automotive paint buffing wheel. You may be able to do it????????

-Ace-

Unless you infuse that with resin to color it, use something like maple and figure out how to dye it the color you like.  Poplar won't hold up as well as a curio box, so once someone manhandles it they'll damage your hard work on the finish.  The ring may have started as poplar but I'm sure it is mostly plastic by the time they got it looking like that and on a ring that won't wear out instantly. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.