Tmize Posted November 6, 2017 Report Posted November 6, 2017 How does everybody sharpen their blades in a planer? Do you remove them an have someone sharpen them that is set up to sharpen cutter knives or sharpen yourself on a jig. An I've seen the kind that says you can hone while still in the machine do they actually work? Quote
minorhero Posted November 6, 2017 Report Posted November 6, 2017 Tried myself, couldn't get it dead flat. Now I send them out to a professional. Quote
Coop Posted November 6, 2017 Report Posted November 6, 2017 I have a jig, purchased from “Deulen” ( would provide you with a link but damned if I know how”, ) that works very well on planer and jointer blades. Quote
pkinneb Posted November 6, 2017 Report Posted November 6, 2017 Mine are $39 a set so I use one edge flip them and when the second edge goes replace them, about every three years. Quote
wdwerker Posted November 6, 2017 Report Posted November 6, 2017 I've got the planer knife jig for the Tormek. It's expensive and slow but does an incredible job. Quote
Tmize Posted November 6, 2017 Author Report Posted November 6, 2017 I was looking at them earlier seemed to be good stuff. They also have one that you don't have to remove them. I've always sent mine off but now they want 100$ to do it an I have a 20 yr old grizzly an the blades have been discontinued an can get them I'm finding out. I'm calling them in the morning to see if any of there newer models will fit. Just checking out my options here Quote
Tmize Posted November 6, 2017 Author Report Posted November 6, 2017 If anybody knows where I can find a new set of blades. I've tried google with no luck it's a grizzly g1021 an the part number for the blades are g1196. I've got 4 sets 2 have some bad chips an need replacement anyway but I one dull an one more getting there. Any help would be greatly appreciated. Thanks Quote
Woodenskye Posted November 6, 2017 Report Posted November 6, 2017 Check infinity cutting tools. You may need to have the measurements to find comparable size. They also sell the jig Coop mentioned. Quote
minorhero Posted November 6, 2017 Report Posted November 6, 2017 14 minutes ago, Tmize said: If anybody knows where I can find a new set of blades. I've tried google with no luck it's a grizzly g1021 an the part number for the blades are g1196. I've got 4 sets 2 have some bad chips an need replacement anyway but I one dull an one more getting there. Any help would be greatly appreciated. Thanks That's crazy expensive. My guy charges 1$ an inch. Quote
Tmize Posted November 6, 2017 Author Report Posted November 6, 2017 5 minutes ago, minorhero said: That's crazy expensive. My guy charges 1$ an inch. Yea I got all 4 sharpened 2 yrs ago an it was 100$ an I could live with that but now it's ridiculous. 11 minutes ago, Woodenskye said: Check infinity cutting tools. You may need to have the measurements to find comparable size. They also sell the jig Coop mentioned. Yea the new 15" model measure the same as mine. But I'm gunna call an find out if they will work I need to replace two anyway. Quote
Pwk5017 Posted November 6, 2017 Report Posted November 6, 2017 If you dont have someone local, give these guys a shot http://dynamicsaw.com/pricelist.html Sharpening blades should not be anywhere near $1.50-2 an inch. Quote
Tmize Posted November 6, 2017 Author Report Posted November 6, 2017 Ok thanks I'll try them. I called grizzly this morning an got a new set to replace my damaged set. That get my other ones sharpen Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.