Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Does Wood Harden with Age..?

Featured Replies

I️ was given a large stack of black cherry that my Dad had cut at the sawmill over 50 years ago. He stored it in a dry area and sticked each layer. I’ve noticed that this lumber is much harder than the kiln dried cherry that I️ purchase at the lumber yard. Does aging make it get harder..?

Probably not. Plantation grown lumber is probably just less dense then the natural stuff that was harvested 50 years ago. Also there is considerable variation in lumber from region to region and board to board.

I also don't think it's the aging process that's made it harder....it's how the wood originally grew before harvesting.  From what I've read, in thicker/denser growth forests (think old-growth stuff) the trees all fought for limited resources, leading to slower growth, smaller growth rings and denser wood.  More "modern" lumber often will come from managed lands where the trees get more water light and nutrients, so they grow faster with larger growth rings, and are not as dense. 

Ya, I agree that age hardening the wood is a myth. Mainly it's those old growth doug fir joists & studs from a 75 year old house that are used as an example. Another factor, I think, is that new lumber is not all that dry. When compared to a stud that has been in a wall for a few years, it's definitely softer, but just because it's still half green

Yellow pine certainly does harden with age. Fresh from the building supply it's easy to cut , nail and screw. 30 years later I had to cut down a huge outfeed table I built from yellow pine 2 x 6's . Very difficult to remove screws. Cuts with sharp blades were a fight. Cleaned the blade, cut hard maple just fine, back to the yellow pine and a struggle. 

 

I’ve discovered, not so much;)! 

It probably is harder than newly kiln dried lumber.  I don't know how much Cherry changes though.  I much prefer decades old, air dried lumber.  It should be very stable, with little stress in it.  For working with power tools, it doesn't matter much, but there is a noticeable difference when working it with hand tools.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.