Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Milk paint

Featured Replies

I’m getting ready to use general finishes milk paint on a project I am wrapping up. Got the can of it today and it says to saying to 220 grit. Here’s my issue The piece already has a hand plane finish. I’ve never had a problem with a finish it hearing to it before do you think it’ll be a problem?

56 minutes ago, Tmize said:

I’m getting ready to use general finishes milk paint on a project I am wrapping up. Got the can of it today and it says to saying to 220 grit. Here’s my issue The piece already has a hand plane finish. I’ve never had a problem with a finish it hearing to it before do you think it’ll be a problem?

I used it for the Poplar base on the Entry Level Bench and that was only sanded to 120.  No issues at all.

  • Author

Thanks. Yea I think I’ll try a it on a scrap piece.  I hate painting the last thing I want to do is have to strip it an do it two times

14 hours ago, wdwerker said:

Plane a scrap and test it ! That's the best solution to your question.

@wdwerker, you need to change your name to Tryitonascrapfirst :) 

Seriously though, that is always great advice.

  • Popular Post

I always test on scraps and prepare & finish scraps along side a project. Sanding, staining, sealing sanding between coats etc. This gives you a place to test for dryness without leaving fingerprints on the project. Great for testing dry enough to sand without clogging the sandpaper too. 

I would imagine, sanding to 220 is for surfaces that already have been painted. Typically, raw wood sanding is 120/150 

 

-Ace-

The only thing I could see with a hand planed surface is that it might be too smooth and the paint would not adhere but like Steve said hand plane a scrap and see.

The moisture in the milk paint might raise the grain on the first coat but some fine sandpaper 220 or 320 should fix that. Milk paint usually takes several thin coats to cover well.

I just took a look over at GF, Raw wood should be sanded up to 150 and don't sand with higher grits due to color change.

Why couldn't you lightly scuff sand a hand plane surface?

 

-Ace-

 

  • Author

The smooth surface is what my concern was. I’m going to try a piece tomorrow night. It a frame and panel case with plywood panels I did sand them to 220. So all I’ll have to ruff up is the frames and drawer faces. An then hit it with 400 grit between coats

  • Author

Question answered after two coats no problem bounding to the planes surface. It looks like it will take 3 coats to cover it. I took my fingernail an scratch at it an no paint flaked off

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.