Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Defects Showing Up On Third Coat

Featured Replies

This is our first set of cabinets painted white using our MiniMite 5 spraying lacquer. We spray one undercoat/sanding sealer, sand, then two finish coats. On a few of the cabinets, small pinholes in the paint will show up on the last coat when there wasn't any sign of a problem on the first two coats. It isn't bubbles.

Anyone know what is causing this?

Also, I don't think the gun is atomizing like it should. We have tried different tip sizes, fluid pressure, air volume, thinning ratios, etc.

Any suggestions on that?

I hate a sprayer for that exact reason and I’m sure the liability is on me and not the sprayer. 

  • Author
7 hours ago, wtnhighlander said:

Any chance you can post a clear photo?

I was so busy at the time, I forgot to get one.

  • Author
6 hours ago, Coop said:

I hate a sprayer for that exact reason and I’m sure the liability is on me and not the sprayer. 

I think we didn't prepare the wood right, but that's just it, I'm guessing.

Any possibility of silicone contamination? Maybe someone used some aerosol silicone lube or furniture polish in the same room as your cabinets? It only takes microscopic amounts. Again, pics would help.

  • Author
5 minutes ago, drzaius said:

Any possibility of silicone contamination? Maybe someone used some aerosol silicone lube or furniture polish in the same room as your cabinets? It only takes microscopic amounts. Again, pics would help.

I pretty sure we haven't had any spray like that in the shop. I really wish I had taken pics

Freed', I assume you've corrected the finish on this project, but you don't want to repeat the problem on the next.  You might have to try to reproduce the problem on some scrap. 

  • Author

I got a pic today. This is a face frame. We went over this with a magnifying glass after the first finish coat. Smooth as glass. Put on the second finish coat and there it is. it's like some hole in the wood decides to open up when we think we're done.

Could the final sanding grit have something to do with it? We have been finish sanding to 150 for paint.

 

A.thumb.jpg.81c5a9873e238fc1066009fb2e9a9c58.jpg

B.thumb.jpg.924e0e52c1b748ee87a44ffc7025be3f.jpg

If the previous coat was glass smooth, then I would think it would have nothing to do with the previous coats. Fish eyes from silicone do not look entirely unlike those divots.

  • Author
1 hour ago, Tom King said:

Those look different than the typical pinholes.  Are you sure they're only in the finish?

I really think it's in the wood, but don't understand why it waits to show up.

  • Author
18 hours ago, drzaius said:

If the previous coat was glass smooth, then I would think it would have nothing to do with the previous coats. Fish eyes from silicone do not look entirely unlike those divots.

I won't rule out anything, but I don't know where silicone would be coming from.

My 71 year old brain doesn't work like it used to, but maybe it will give someone else a start. There is a difference in sandpaper substrates one of them is not recommended for finishing because it contains silicone and that is what this looks like.

2 hours ago, Larry Moore said:

My 71 year old brain doesn't work like it used to, but maybe it will give someone else a start. There is a difference in sandpaper substrates one of them is not recommended for finishing because it contains silicone and that is what this looks like.

I wasn't aware of that. It would be good to know what kinds, so to avoid them. Stearated paper doesn't.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.