Recommended Posts

Posted

My favorite for the bath is Corian undermount sink.  Virtually seamless.  Easy to keep the sink and surrounding area clean.  

1610115680420259328158.thumb.jpg.86990a32f9d545a858ca606f686c2b85.jpg

We have a vessel sink in the powder room and I absolutely loathe it.  Splash out is a constant problem.  

Kitchen has undermount stainless, so similar to your picture with a seam.  Not optimum, but better than surface mount, which has it's own seam problem.  And stainless has advantages in the kitchen.  

 

Also, we have some dark blue basins.  They show the dirt much worse than white.  

  • Like 1
Posted

I was looking at Corian and the cost is going to push me away from them. To get custom sizes (Which i have to get because I'm constrained by walls) the price goes from reasonable(~$200) to absurd (~$800). I can get Granite in a custom size (~$300) for not much more than the off the shelf corian.

Still looking and still considering ideas.

  • Like 1
Posted
1 hour ago, Mark J said:

Just to clarify I wasn't advocating Corian per se, but the sink design.  But there are lots of choices of design, materials and construction that you'll have to consider before making your choice.  Then Megan will tell you what you're going to do.  :rolleyes:

There are limited options for the molded 1 piece tops, i was following what you were saying. I honestly wish that Megan was as decisive as that. Instead she just says "do what ever you think is right, i just want it to be easy to clean."

  • Like 1
Posted

I don't remember what a 12' sheet of Corian used to cost, but thinking it was about $200.  The bathroom sinks were not bad, but the big, double kitchen sinks were about 150.  You can buy smaller sheets. That's been 25 years ago though, so probably double now.  If you would like to borrow my bits, I don't mind sending them to you.  They haven't been used enough to be hurt, like my old Formica bits were, and I'm sure you have some fancier ROS's now, than I ever had, especially back then.  You just glue the sink under a sloppy cutout, route it, and sand through really fine grits to finish.

I remember a job someone quoted me, over the phone, sometime back then for $1100, and I did it for less than a couple of hundred.  That was before they started making the sinks, so that was for countertop alone.  That's how I made a living, by building for half, or less than I could get someone else to do it, plus not wasting time talking, and waiting.

I still have scraps of Corian from back then that I sometimes make something out of, like specialized router bases, and even one shooting board.

Posted
6 hours ago, Chestnut said:

 Instead she just says "do what ever you think is right”

Within a couple of years you’ll have learned to shy away from those words. Not only a commitment from her but on paper! :D

  • Haha 1
Posted

Granite hands down. My first choice in any plumbing area. Stain and heat proof. If you go granite, go to the nearest big city. Find a seller of granite with a large amount of choices. Buy what you want and make arrangements with a local fabricator. The seller will truck the stone to your fabricator. You can start with the local part first. They will know where the opportunities are. Buy enough stone now if you have future projects. All granite is equal for service. The price is dictated by rareness and beauty.

  • Like 2

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 36 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined