Recommended Posts

  • 9 months later...
Posted

Starts with square parts and they seem to fall into place. That's melamine. On plywood or solid, you use the bottom to get square. Put 4 corners together and use the bottom to square it up. It always pays to have a flat table as well. 

  • Thanks 1
Posted

Now some shop do and some shops don't use glue. If you put a bead of glue on the drawer corner and waste a lot of time with all these shims , you might either have a dry joint or a bunch of dried glue on the inside of the box. 

 

170503681_CornerClamp4.thumb.jpeg.247c45a5cc8c7361213e06729b055b13.jpeg

Posted

Don, (PB) often touted simple plywood blocks with crosscut dados that formed pieces that would self register on a corner without clamps. The only tricky part of that is cutting the dado tight to the ply thickness. Relatively easy to store a large number and glue up several carcasses easily at the same time. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 54 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined