TheWoodShouter Posted August 20 Report Posted August 20 Hello all! I'm looking to buy a new table saw, and one of the saws I am considering is the SawStop PCS. I have a very small shop so I necessarily need a mobile base. I see there are two options through SawStop, I understand they are very nice, but, in typically SawStop fashion, they are very expensive. I believe the $500 one is hydraulic, I'm not sure about the $350 mobile base. I would like to ask if the SawStop brand mobile bases are definitely the way to go with a SawStop table saw, or if anyone successfully uses a much less expensive mobile base, such as Bora? Any help would be appreciated! 1 Quote
Popular Post Ron Swanson Jr. Posted August 20 Popular Post Report Posted August 20 I have the PCS saw and the ICS (pneumatic) base. The PCS has slightly smaller footprint than the ICS saw, so the base comes with a conversion kit to make it fit. I LOVE that base. It works so well. A couple foot pumps raises the saw and you can nimbly move it in any direction. Love it. What I don't love about that combination, is the horrible integration with the SawStop outfeed table. Because the base is bigger than the saw, the table will not fold down flush when it's time to move the saw, which doesn't sound like a big deal, but it's a major pain. I've never been a huge fan of that outfeed table. It's way too big for my purposes, not super well constructed, and only plays nicely if the saw and base are of the same series. So in sum: Saw: A Base: A+ Outfeed: D- Hope this helps! 4 Quote
Popular Post TheWoodShouter Posted August 20 Author Popular Post Report Posted August 20 On 8/20/2026 at 5:31 PM, Ron Swanson Jr. said: I have the PCS saw and the ICS (pneumatic) base. The PCS has slightly smaller footprint than the ICS saw, so the base comes with a conversion kit to make it fit. I LOVE that base. It works so well. A couple foot pumps raises the saw and you can nimbly move it in any direction. Love it. What I don't love about that combination, is the horrible integration with the SawStop outfeed table. Because the base is bigger than the saw, the table will not fold down flush when it's time to move the saw, which doesn't sound like a big deal, but it's a major pain. I've never been a huge fan of that outfeed table. It's way too big for my purposes, not super well constructed, and only plays nicely if the saw and base are of the same series. So in sum: Saw: A Base: A+ Outfeed: D- Hope this helps! Thank you for your reply! Just to be clear, you have the $500 mobile base? I don't think the $350 mobile base is hydraulic/pnumatic? Could I please ask if it has four independently spinning wheels, where you could raise it up and then more or less spin it in place? Or, does it have two fixed wheels that means you have to sort of roll it back and forth to turn it around? I hope that made sense lol! It sounds like the SawStop folding outfeed table is a dud, with that in mind would you suggest the mobile base with a shop made outfeed table as a good combo? Thank you for your help! EDIT - I just noticed your grading system above 3 Quote
Popular Post Chet Posted August 20 Popular Post Report Posted August 20 On 8/20/2026 at 2:43 PM, TheWoodShouter said: I don't think the $350 mobile base is hydraulic/pnumatic? I have this on my saw and it is not hydraulic it is some kind of lever action you step on the peddle to raise it and then push the peddle up from the underside with your toe to set the saw back down. It only has two steering wheels where the model mentioned above all four spin. If I had to move my saw a lot I wouldn't care for this model but I have had my SawStop since 2014 and have moved it maybe five times. If you need to move your saw a lot get the other one. 3 Quote
Popular Post fcschoenthal Posted August 20 Popular Post Report Posted August 20 I've got the PCS with the ICS base and like Doug says, it's a dream to raise and lower. I don't have much (enough) room in my shop, so I have to constantly move it side-to-side or front to back to make specific cuts. The wheels are independent, so once lifted, you could spin it in a tight circle if you had the room. 4 Quote
Ron Swanson Jr. Posted August 20 Report Posted August 20 You can see the size difference between the base and the cabinet. The ICS (biggest and baddest they make) is sized to go with this base. The PCS (scrappy younger brother) needs the conversion kit. I can't remember if it just comes with it or you have to buy it separately, so check into that if you go this route. 2 Quote
Ron Swanson Jr. Posted August 20 Report Posted August 20 On 8/20/2026 at 4:43 PM, TheWoodShouter said: It sounds like the SawStop folding outfeed table is a dud, with that in mind would you suggest the mobile base with a shop made outfeed table as a good combo? The outfeed is not great with the specific combo of the ICS base and PCS saw. I think it probably works as intended if you keep the PCS saw with the PCS base, or the ICS saw with the ICS base. (ICS is the pneumatic base, PCS is the lever action base) It's really big, so if you have a small shop, you're probably better served making your own and integrating some storage into it! 2 Quote
TheWoodShouter Posted August 21 Author Report Posted August 21 Thank you all for the replies, I appreciate the help! 2 Quote
Popular Post Ron Swanson Jr. Posted August 21 Popular Post Report Posted August 21 On 8/21/2026 at 7:55 AM, TheWoodShouter said: Thank you all for the replies, I appreciate the help! Unsolicited, but shouting at the wood doesn't help. Neither does shrieking, screaming, crying, or promising to change. 5 Quote
drzaius Posted August 21 Report Posted August 21 16 hours ago, Ron Swanson Jr. said: (ICS is the pneumatic base, PCS is the lever action base) The ICS base is actually hydraulic. And it's wonderful. 2 Quote
Ron Swanson Jr. Posted August 21 Report Posted August 21 On 8/21/2026 at 10:55 AM, drzaius said: The ICS base is actually hydraulic. And it's wonderful. Ugh. Yep, that's right! Thanks 1 Quote
Popular Post pkinneb Posted August 21 Popular Post Report Posted August 21 Late to the show but if in my opinion if you are moving it a lot get the $500 version or go with an aftermarket version where all 4 wheels swivel. Full disclosure I started with the cheaper SS version and switch as I needed all four wheels to swivel. 3 Quote
TheWoodShouter Posted August 22 Author Report Posted August 22 On 8/21/2026 at 6:23 PM, pkinneb said: Late to the show but if in my opinion if you are moving it a lot get the $500 version or go with an aftermarket version where all 4 wheels swivel. Full disclosure I started with the cheaper SS version and switch as I needed all four wheels to swivel. Thank you! Yes, I really need all four wheel to swivel. On 8/21/2026 at 9:03 AM, Ron Swanson Jr. said: Unsolicited, but shouting at the wood doesn't help. Neither does shrieking, screaming, crying, or promising to change. You'd be surprised at what goes on in my shop 2 Quote
Ron Swanson Jr. Posted August 22 Report Posted August 22 On 8/22/2026 at 9:39 AM, TheWoodShouter said: You'd be surprised at what goes on in my shop Only if it's different from what goes on in mine, which is usually the behaviors I described, and in that order. 1 1 Quote
gee-dub Posted August 22 Report Posted August 22 When I was between shops and working out of a garage with a horrible floor I found this one to work very well. I agree that there are times when having all four corners swivel is an advantage. As the machine gets heavier having the fixed swivel point at one end works better for me. However, I am 71 and about a buck-80 so you have to factor that in. 1 Quote
TheWoodShouter Posted August 23 Author Report Posted August 23 On 8/22/2026 at 11:58 AM, Ron Swanson Jr. said: Only if it's different from what goes on in mine, which is usually the behaviors I described, and in that order. I'm not going to lie, sometimes the wood wins 2 Quote
TheWoodShouter Posted August 23 Author Report Posted August 23 On 8/22/2026 at 1:51 PM, gee-dub said: When I was between shops and working out of a garage with a horrible floor I found this one to work very well. I agree that there are times when having all four corners swivel is an advantage. As the machine gets heavier having the fixed swivel point at one end works better for me. However, I am 71 and about a buck-80 so you have to factor that in. Thank you for your help! My only objection to the mobile base you've linked is that it looks like the back two wheels are fixed, and I think for my tiny shop I'd like an option where all four wheels spin. 1 Quote
Popular Post Mark J Posted August 26 Popular Post Report Posted August 26 On 8/20/2026 at 3:54 PM, TheWoodShouter said: looking to buy a new table saw, and one of the saws I am considering is the SawStop PCS I saw on Stumpy Nubs Instagram site, that at the IWF Atlanta, Harvey has just revealed a prototype table saw with nondestructive flesh sensing and a raft of other features. Just when you were making up your mind. 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.