jeff0520 Posted December 31, 2012 Report Posted December 31, 2012 Hello all. I use good old Johnston's Paste Wax for rust prevention on my cast iron tables. My usual practice is to spend a Saturday working in the shop, and when I'm done I clean up all the stray sawdust, and throw a quick coat of wax on any cast iron tools I use before I call it a day. A friend of mine told me I'm going to regret all that wax in a few years when it builds up and gums things up. He expressed the opinion that I should only be waxing my cast iron tables a couple times a year. So what do you think? I personally find it satisfying to finish up for the day, and look at the shop on the way out and see everything clean, freshly waxed, and gleaming. Quote
Cochese Posted December 31, 2012 Report Posted December 31, 2012 Unless you live in a swamp, 1-2 times a year is enough. I work in an unconditioned shop and once in the winter is all I do. Once a year, I don't worry about the wax transferring to my work. Once a week? It would be a big concern. Sent from my cm_tenderloin using Tapatalk HD Quote
jeff0520 Posted December 31, 2012 Author Report Posted December 31, 2012 Well, It's not especially swampy here, so it sounds like maybe I need to find something else to be OCD about Quote
Nick2cd Posted December 31, 2012 Report Posted December 31, 2012 yeah, every use may be a bit excessive....however, i see no problem with once a month (provided you use the equipment on a regular basis). as you use the equipment, you are skimming off/depleting that wax coating you put on. a quick refresher every month or two will keep things slick and rust free, but i would agree that every time is overkill. Quote
duckkisser Posted December 31, 2012 Report Posted December 31, 2012 i think once a week is not enough i think you should do it once a hour. if you realy want to be ocd about something check your alighnment and calibration of your tools once a week take less time cost less and your tools will always be spot on. also if your feeling realy wild you can dust with a toothbrush Quote
knotscott Posted December 31, 2012 Report Posted December 31, 2012 If you're going to wax it often, you might consider stripping it off with mineral spirits now and then to avoid too much buildup. Quote
Hybrid-woodworker Posted December 31, 2012 Report Posted December 31, 2012 I don't see a lot of harm in waxing just the tools you have used but it is way more than necessary. Some people calibrate too often, some wax too often, some clean too often and the rest of us don't do any of it often enough. It's your shop and your tools, make yourself happy. :-) BRuce 1 Quote
CessnaPilotBarry Posted December 31, 2012 Report Posted December 31, 2012 I keep a paraffin canning wax block near my jointer, table saw, and other cast iron tools. When they get "draggy", I give the top, and/or fence(s), a zig-zag of wax, the same way I lube my hand planes. I figure cast iron is cast iron. The block is really easy to use and store, and it works great. I also run the block along miter slots and sled runners. You can put blocks all over the shop, equipping yourself for years, for less than $5. I think I paid $4 for my last 1 pound box that contained 4 blocks. As for build up, I figure if wax is building up on a surface, it's not being worn away during use, so it isn't hurting anything. I find the blocks easier than paste wax. A few times a year, I'll completely wipe down all my cast surfaces with Top Saver. This catches all the areas that rarely get touched, and don't see much wax. Quote
Beechwood Chip Posted December 31, 2012 Report Posted December 31, 2012 I got a rust spot from a drop of sweat on a tool that I had waxed a couple of months before. So now I take the rag I use for waxing my cast iron and wipe down all the tools I used at the end of the day. I don't put any more wax on the rag; it's just a quick wipe to make sure that there are no sweat drops or breaks in the wax protection. Quote
jeff0520 Posted December 31, 2012 Author Report Posted December 31, 2012 Sounds like opinions vary on the topic. I do have mineral spirits in the shop, so I guess I'll cut back to waxing once a month, and every few months a mineral spirit strip i think once a week is not enough i think you should do it once a hour. if you realy want to be ocd about something check your alighnment and calibration of your tools once a week take less time cost less and your tools will always be spot on. also if your feeling realy wild you can dust with a toothbrush Tool alignment checks are once a month, and as a matter of fact, I DO have a toothbrush for end of day clean up. If I could just get my joinery to come out as clean as my tools I'd really have something going Quote
dwacker Posted December 31, 2012 Report Posted December 31, 2012 Ive always been wax a wax happy woodworker. Never had a problem with Johnsons building up and causing a problem. I wax weekly and love the feel of freshly waxed tops. Wax away it doesnt harden just do a good buffing job. Don Quote
TRBaker Posted December 31, 2012 Report Posted December 31, 2012 I've used wax sparingly since it caused problems with transfer for me on a hickory table top. I had just waxed my ts and then ripped a sheet of hickory plywood. I got terrible fish-eye when i went to put poly on the surface. I would have thought that the buffing of the wax and the sanding of the ply would have compensated for the transfer of any wax, but not so. Once a month is plenty. Once a week might be ok,too. Just don't cut anything until the wax is cured good. You also have to be very careful not to get any silicone on you material if you use silicone lube of any kind. Most auto body finishers won't even allow armor-all on the premises. Quote
rodger. Posted January 1, 2013 Report Posted January 1, 2013 I wax my tables two to three times a year. I often clean the surface first using wd40 and 0000 steel wool. Then I use a spray of topcote and finally paste wax. Quote
Eric. Posted January 1, 2013 Report Posted January 1, 2013 I wax my tables when they're not slippery anymore, and that happens often enough to prevent most surface rust. Not sure why any more than that is necessary...that'd be kinda like clipping your toenails every other day. Quote
Byrdie Posted January 12, 2013 Report Posted January 12, 2013 I don't see a lot of harm in waxing just the tools you have used but it is way more than necessary. Some people calibrate too often, some wax too often, some clean too often and the rest of us don't do any of it often enough. It's your shop and your tools, make yourself happy. :-) I think I'm in the last category. Wax when I remember to, clean when it gets too deep, calibrate when I'm working on something that demands precision. Find most of the time that's just enough. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.