The ruler trick  

40 members have voted

  1. 1. Do you use "the ruler trick" on your plane blades?

    • Yes
      18
    • No
      21
    • Sometimes
      1


Recommended Posts

Posted

"Sometimes" was not available...

My really good irons are flattened, at least along the critical area near the bevel, so I don't ruler trick them.

I do use the ruler trick on OE Stanley irons, and bevel up irons that have a bit of wear at the edge.

Posted

For many years I flattened the backs of everything, then the ruler trick was shared and it makes everything soooo much nicer.

I know it has been said that Pug is going to shed some light but a little insight for those of you wondering, The ruler trick is when you hone your plane irons as normal and then instead of flattening the whole back of your iron you lay a very thin ruler on your stone to tip your iron just a tad so that you are only honing the very tip. This works great on plane iron but you cant do it on chisels as it will make it so the tip isn't in line with the chisel back causing problems when paring or chopping.

Posted

For many years I flattened the backs of everything, then the ruler trick was shared and it makes everything soooo much nicer.

I know it has been said that Pug is going to shed some light but a little insight for those of you wondering, The ruler trick is when you hone your plane irons as normal and then instead of flattening the whole back of your iron you lay a very thin ruler on your stone to tip your iron just a tad so that you are only honing the very tip. This works great on plane iron but you cant do it on chisels as it will make it so the tip isn't in line with the chisel back causing problems when paring or chopping.

I think I saw Rob Cosman do this in a video??? Before it was described I had no clue what the op was talking about. Never tried it, but I will next time.

mds2 I was just makeing a bad joke sorry, nateswoodworks thanks for the explanation.

No worries.

  • 3 weeks later...
Posted

I use the worksharp and while I could put on a microbevel I don't because I bought an extra glass wheel and have 2000grit on both sides and it so fast and easy for  me to touch up chisels whenever i want. Plane blades too but it sucks having to take the blade out and then getting everything realigned.

Posted

Whats the ruler trick?

Basically, after you've ensured the back of your blade is flat, and you have completed sharpening the regular part of the blade (including a micro-bevel if you are like me) you flip the plane blade over on its back again, place a very thin metal rule (like 1/16" thick for example, definitely not thicker) on the stone and place your blade on top of the ruler and stone, make a couple of passes and this creates a very small back bevel.  I use it on all my plane blades.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.