Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finally Got My Wife To Let Me In The Basement

Featured Replies

My woodshop has always been in the garage and for anyone who knows how cold it gets in Northern Minnesota... it pretty much sucks to work out there in the winter....

 

Finally talked my wife into letting me use the backside of the basement (which ends up being a bit bigger than my garage anyways) Garage was 8x12 (single stall) basements is 12x15 so I get a bit more room...

 

I just started moving stuff down there last weekend but have a ton to go but I thought I would put a couple pictures up of what I have to work with...  

 

Still need to get the assembly table down there which also acts as my out feed table for the table saw and the 1 bench I have down there already is a giant mess (Usually is relatively clean)

 

But it’s a start and at least I can stay warm (or warmer) in the winter and be able to work on projects... And I have a slop sink which makes for easy cleanup before going upstairs... (All I’m missing is a bathroom and a fridge)

 

Any thoughts on saving space are appreciated (Unfortunately wall space is useless due to concrete walls)

post-7824-0-12194200-1367605722_thumb.jp

post-7824-0-02918900-1367605723_thumb.jp

post-7824-0-52967400-1367605723_thumb.jp

post-7824-0-48594700-1367605724_thumb.jp

  • Author

Nice wood den, sure beats freezing to death.

That was my thought, even though its starting to warm up it stays cool in the summer as well. 

 

To bad i have so much left to do before being able to do any serious work down there

  • Author

I know Eric1978 im looking forward to it, i just wish i had more time since i work all week the only time i really have in there is the weekends.  but i still like to spend some time with the wife and kids  :D

Congrats Dave! I used to live in Michigan, so I know what garages in the winter are like. At least in the basement, you have a hope of getting it a little warmer, and you can actually work in there.

 

Concrete walls are tough, but did you consider furring out a wall and possibly putting some T-111 on it? Even if it's only 1 wall, you could gain some valuable storage space.

Curious.  Even with everything on mobile bases and room for the cars, my other half can't stand me doing anything in the garage and has been itching for me to move production down to the basement.  Different strokes.

rob ask her if she would be willing to move the car down to the basement :)

dave have you thought of a tool tower what i mean is your smaller tools are on a rolling base like planer is at normal lvl and it has two sides but the front and back are open to put your planks through.  the next side up has something like a oscelating sander. or if you have multiple grinders build a shelf so you can put your grinders on top of one another.  ill shoot you some pictures later of my basement shop which is in a 4 by 6 ft space plus storage and finish work else where.  and my lathe will be used in the driveway.

Every day, expand your workspace by 1/8" - soon the basement will be yours!

  • Author

dave have you thought of a tool tower what i mean is your smaller tools are on a rolling base like planer is at normal lvl and it has two sides but the front and back are open to put your planks through.  the next side up has something like a oscelating sander. or if you have multiple grinders build a shelf so you can put your grinders on top of one another.  ill shoot you some pictures later of my basement shop which is in a 4 by 6 ft space plus storage and finish work else where.  and my lathe will be used in the driveway.

Ive been looking at building a big cabinet for all my planes, saws, hand drills, etc that will go on 1 wall but i would be curious to see what this tool tower looks like...and id love to see pictures duckkisser.....

I had an idea I've been kicking around for a while for a small space, for managing all of the benchtop style tools. Very similar to what you are showing, duck.

 

Have you ever seen those carts they have in large bakeries or donut shops? Basically an aluminum frame with a bunch of slats on it and they slide big baking trays on and off of it.

 

Thought about something like that in wood. A rack like a tool tower with braces along the side. Then you have a bunch of your benchtop tools (spindle sander, mortiser, etc) all mounted on same size pieces of plywood. You slide them into the rack. So you store a bunch of tools vertically. Then you slide the plywood (with the tool mounted) out, put it on your bench and go. Then slide it back.

 

Just not sure with the sizes of tools, if that's something that seems like a good idea in theory, but would suck in practice.

There is a similar tool idea I have seen in several wood magazines can't remember the name of the brand.

  • 6 months later...
  • Author

UPDATE!!!!!

 

Basement is cleaned out FINALLY...  :rolleyes:   Well for the most part...

 

Rethought my layout and expanded a bit too around 20x20... I made some temporary shelves and since I can’t use the walls since they are concrete I decided to use the braces above (for now).  I need to make a new out feed table that will be bigger than the previous one and will have a ton of storage under it for excess tools and a shop vac. The pictures attached show the general idea of where I want to put things, but I change my mind a lot and who knows if things will stay the way they are... 

 

There are still a few things to clean up and get out of the way but for the most part I am 95% done with the layout... I am going to either buy or build (not sure which one yet) some stand alone shelving to use for paints and stains and whatever else I can fit in there....

 

I am still running into an issue with power since there are only 3 110 outlets and 1 220 outlet, I think I am going to run power to the assembly/out feed table in the joists above and drop down to a large power strip of some sorts, so that I have plenty of power for that area, the same will go for my bench...

 

As everyone knows from the post above I am a (Newbie) if you will, the first thing I ever built is the bench in the pictures below.  It’s not perfect but it will work for now until I can build a better one.... :rolleyes:   I mounted a TV above connected to a laptop for sketch up, and have started to find some of the useful tools that it provides.....

 

Any suggestions on layout and setup would be appreciated. I will take any help I can get....

 

Thanks Everyone

 

Dave  :ph34r:    

==> My woodshop has always been in the garage and for anyone who knows how cold it gets in Northern Minnesota... it pretty much sucks to work out there in the winter....

First of all, you must be a truly dedicated woodworker--- I've only to Minnesota once, and it was in February and about -30F... My hats off to you...

 

 


==> Finally talked my wife into letting me use the backside of the basement 

What was her objection?  Just use of space or some sort of safety concern...

  • Author

==> My woodshop has always been in the garage and for anyone who knows how cold it gets in Northern Minnesota... it pretty much sucks to work out there in the winter....

First of all, you must be a truly dedicated woodworker--- I've only to Minnesota once, and it was in February and about -30F... My hats off to you...

 

35 below in febuary is nothing, try 50 with the windchill... :unsure: 

 

 

==> Finally talked my wife into letting me use the backside of the basement 

What was her objection?  Just use of space or some sort of safety concern...

 

She wanted the space, but i put an end to that (and im still paying for it lol)  ;)  

put some strapping on walls cheap plywood and there  its a shop with walls ......

  • Author

put some strapping on walls cheap plywood and there  its a shop with walls ......

I dont want to put that much time and $$ into a place that i rent... When my wife and I buy our new house (Eventually) I will have a standalone Shop)

with furnace down there could be a little unsafe with fumes depending on what you do there...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.