Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

1 car garage set up shop price

Featured Replies

 i might be able to move to a 1 car garage to set up a shop. rather then a corner of the basement.  there i can  finaly start thinking on how i want to work. what tools i need. and so forth. im puting together a general price list to put it together. i know to get my shop perfect ill be years in the making but i know ill need full lighting, insulation so i can heat and cool the shop, pvc for dust collection,electrical, fire extinguishers ect.....

 

ok im going to ask a kind of open ended question since its different for everyone. for those of you who have redone a garage or put together a garage sized shop how much is it going to cost.  this is just foundation not any tools. this does not have to be exact just a general price so i can sit down and budget the cost out over several months. or posibly to get a loan so i can build my credit some. 
 

again this is just a rough estament

 

This depends greatly on the age of the home and the quality range of the build. I just moved in to a mid range 50s home and there are no recepts in the garage except for the one added for the garage door opener. I moved out of a high quality 1860s with no power anywhere til I put it there. Most poor quality homes even since the 80s will have some power in the garage. If the panel is 80 feet the other side of the house then you are stuck with extension cords and hand tools until that is resolved. The further the panel typically the greater the cost and that is just infrastructure. Not trying to scare you, just to let you know what you can run into and should look at when considering your space.

Agree with Shaffer.  Need a little more info, maybe some pics..

 

Current electrical

Current wall treatments - open studs, insulated, drywalled, etc..

Ability to put compressor/dust collector elsewhere?

Is the floor useable?

Will other items be stored there?

  • Author

The house is not that old probable 1960ish don’t know how far away it is I might have to put in a second panel. maybe convert it to 220. But there is electricity in the garage just one light and couple plug in's. But the power already runs to the garage. this is a house my brother is inheriting and basically I can get the garage for a shop cheap........pay electrical and fix up the house and eventfully ill rent the space. can’t beat a few years of free rent plus i might rent the house.

  • Author

stud walls no insulation, floor just garage floor 110 electricity, its just a bare bones garage.  eventuly i want to build dust house for my dust collector in the overhang  porch on the side. just going to use for shop or else family would fill it. no pic just grounf stage right now cleaning it out lady filled it she was a horder so its stuffed.

Open studs are the easiest for bare bones. You'll have to spec and price wall coverings at some point based on storage needs but you should be able to wire and insulate for a few hundred depending on you doing it yourself...one handed:-). While the studs are open I would think about plumbing for air if you ever use air so you can leave your compressor in one spot and deal as little as possible with pipes and hoses. Even consider a drop in the center, still less than a thousand to get in the space. Cast off cabinets, 3/4 ply, French modular cleating you likely can even think about storage for less than 1,500. Where you start getting bit is paying someone else if you cannot do it yourself or own it yourself.

Well, it would seem logical that the electrical would be first.  Cost would be determined by the amount of work to be completed, your abilities, and your local laws and code requirements.  Cool thing about this is that estimates are usually free…lol  Keep in mind your future layout of equipment as you take care of this one.  Also, prepare to improve your lighting here.

 

Security.  Door locks, alarms, what ever you feel you need to protect your investments.

 

Insulation – As much as you can afford!  It’s worth the extra cost.

 

Soundproofing – I did this in my shop and have never regretted it.  I put up 1 layer of sound board, a lathing strip, and then a layer of drywall.  Works great!

 

Organization – Decide what you want fixed in place and what needs to be on wheels.  Suggest keeping your dust collection in mind as you do your layout.  Also, consider your workflow as you lay things out. 

 

At this stage, most of the rest is the tooling.  A lot of the stuff up to this point can be done yourself if you have the skills.  If you don’t, then the cost can get way out of hand in a hurry.  You can usually find demo'd kitchen cabinets cheap enough.

 

I built my shop from the ground up.  There was a bunch of this stuff (like drywall and soundproofing) that I had to research and learn.  There was some other stuff (like electrical and plumbing) that I payed friends with beer and pizza to do for me.

 

All in all, if the structure is sound, I don’t think you’re looking at a butt load of cash to get it set up for shop use.

  • Author

i should be mended by the time we clean out the garage (thanks for the thought) i dont think ill put the air behind the walls because if i dont stay most people wont need the pipe and ill just take it with me for next shop. ill just put the plumbing on the surface wont need that much maybe a just a couple of short runs. i think ill do it all myself.

 

so you think 1500 for walls and electrical, piping, cabinets?

 

then pvc for dust collecton?

 

odds and ends?

 

  thinking maybe 3000 before im done.

  • Author

thanks tiods planed lots of shops i had to reorganize my shop class a number of times just didnt pay for it. so im trying to figure out a idea of cost.

If you're doing it yourself, I think 3k is a pretty fair number.  I'm sure you have some connections here and there to score some good deals.

 

Good luck!

I guess it may depend on how many tools you would like to get and how big your budget is. 3k just to get the garage in order is a big chunk of change, does that leave you money for tools. It would suck to have a shop ready to go but then not be able to buy any tools to put in it. I would maybe start with electrical, get by with just a single stage dust collector, buy some tools and work like that for a year or two and go from there. 

I planned mine out on paper and layed it all out with tape. Gave the electrician and the hair handler tech copies of the manuals. I think I changed it 20 times but it was easy to just peal up the tape and move it around.

 

Id get a bit from an electrician.

 

  • Author

i have my band saw its a little bloody :) but still good to go, scroll saw, hand tools, carving bench, my lathe and my carving tools. for carving and turning i can live with just those tools just need jointer and dust collector and as time goes on i can buy the rest.  because of my recent injury all my hard shop work will have to wait till the hot/muggy end of summer, constently cold rain of fall and windchills of winter . thats why i want to get it insulated and lighted as soon as possible. right now im carving in corner of my basement and draging lathe in drive for turning not the best work spaces. right now i need space and organization later as i expand i will need more tools. but if im organized now i can just plug in my machine to the dust collector hose and star working. saves time in the long run

  • Author

i have done the same particle but i layed mine out with chauk easer to wipe out while i was thinking it throgh. 

Duck, I am also in the beginning process of a one car demo right now. Ive been in this garage for 2 years with no power and no insulation. The ceiling had lots of openings so no heat would hold period. I started pulling all wallboard down and getting rid of it slowly on garbage day. I havent really priced it all out yet, just knowing I have to get the garage under control because rust is showing up on my cast iron and I am not too thrilled about it.

I havent really priced it all out yet, just knowing I have to get the garage under control because rust is showing up on my cast iron and I am not too thrilled about it.

The uninsulated and open framing are one problem with a garage shop the other main problem is garage slabs are poured directly on dirt with no vapor barrier(plastic sheeting, the problem is concrete is porous so moisture is pulled up through concrete as it evaporates and creates a swampy condition which causes rust. I have had many garage shop in the past, when I built my new shop(5/6yrs. ago)it was a year or so before I insulated and dry walled the interior, I didn't have any rust issues in this time period and, the only difference between this shop and, all the other garage shops was the vapor barrier under the concrete floor slab.

Slabs are fairly simple to paint with several modern epoxy paint systems. I have painted a lot of commercial concrete this way and the paint is designed to hold up under forklift traffic. Foot traffic areas can even have sands scattered into them for a lower risk of slippage if you spill something. Most epoxies also have oil and gas resistive properties for dual use garages. I would encourage you to look into this option if you have a lot of moisture wicking through your slab. I also believe that excess humidity can be partially alieviated through the use of radon evacuation fans that are bored through the slab. This would be recommended by some to keep a surface treatment of your slab from encouraging the slab to just hold the moisture. It may be worth starting a new thread to see if some of the other builders have mitigation suggestions for you.

Did a major shop overhaul last july. Two car concrete block with 2x6 rafters and 2x4 gable ends. Before i rewired it, There was a 150 amp service with ONE electrical outlet...... Built in 1970.

I did a price comparison between my electrical supply house and home depot for all the electrical parts. I saved $300 by using the electrical supply. Total electrical cost for new panel, wire, plugs, emt, nuts, yada yada was $750. A few hundred of that was for dimmers so maybe it was $550 for all.

Paint for the walls and ceiling was $250. Paint your shop walls and ceiling once they are covered. The light will reflect off of them and make you feel & see better. White is a good choice :) we have a vaulted ceiling so i rented a sprayer to paint the ceiling.

I left the concrete floor open when we painted. Its covered in paint drips and looks beautiful. It added a bit of texture too.

We almost dropped $1200 on insulation for the ceiling but didnt because we thought we would use the 1200 for vacation in the winter. Horrible idea BTW.

I also recommend burning some sage after your shop is completed. You never know what kind of energy is in there and its important to clear it out.

Some pretty bad stuff went down in our shop before we moved in and the whole cleaning out process was really heavy. I now spend more time in that shop than i do in my bed... 3,000 seems like an oversized budget for a DIY. However, that would give you enough buffer to really go above and beyond with shelving or organization needs, trim, and dust collection pipes.

Have fun! I hope you are healing well and cant wait to see you expand!

I rebuilt my two car garage shop a couple years ago...electrical, lighting, insulation, drywall, paint.  I paid a taper $250 to do that part, and had my electrician buddy do the electric for a case of beer and a pizza.  I didn't keep close track of the total cost, but I bet it was close to 3K all said and done, maybe a little less.  I probably spent $500 on T8 fixtures and bulbs alone, and Romex is expensive.  Still need to insulate the ceiling and garage door.

 

If this is a shop you plan to stay in for years, go the distance and do it right, starting with a gut job and new electric, insulation, drywall.  If it's just temporary, I wouldn't waste a dime on it.

I was pretty fortunate that my double garage was insulated and dry walled/mudded before I moved in.

I added lights, some new electric, and painted ceiling and walls. I have been battling my inner demons for years about what to do to the floor. Some days I think plywood subfloor is a great idea. Other days I think about epoxy. I wish I could just make up my mind! Right now it's bare concrete with a few pads.

The other issue I had to deal with was heat. The winters here are brutal cold, and the shop is unusable in winter without some type of heat. I added a ceiling heater that takes the edge off, but I will invest in a better heater this winter. I am going to go electric for ease of install and initial cost. The unit I chose will cost about 15 cents an hour to run.

I actually put a second shop in my basement for those REALLY cold days. I call it a shop, but it's really a hand tool workbench and a cabinet of hand tools. I do some joinery there, or make the occasional small, no power tools allowed, project.

  • Author

Did a major shop overhaul last july. Two car concrete block with 2x6 rafters and 2x4 gable ends. Before i rewired it, There was a 150 amp service with ONE electrical outlet...... Built in 1970.

I did a price comparison between my electrical supply house and home depot for all the electrical parts. I saved $300 by using the electrical supply. Total electrical cost for new panel, wire, plugs, emt, nuts, yada yada was $750. A few hundred of that was for dimmers so maybe it was $550 for all.

Paint for the walls and ceiling was $250. Paint your shop walls and ceiling once they are covered. The light will reflect off of them and make you feel & see better. White is a good choice :) we have a vaulted ceiling so i rented a sprayer to paint the ceiling.

I left the concrete floor open when we painted. Its covered in paint drips and looks beautiful. It added a bit of texture too.

We almost dropped $1200 on insulation for the ceiling but didnt because we thought we would use the 1200 for vacation in the winter. Horrible idea BTW.

I also recommend burning some sage after your shop is completed. You never know what kind of energy is in there and its important to clear it out.

Some pretty bad stuff went down in our shop before we moved in and the whole cleaning out process was really heavy. I now spend more time in that shop than i do in my bed... 3,000 seems like an oversized budget for a DIY. However, that would give you enough buffer to really go above and beyond with shelving or organization needs, trim, and dust collection pipes.

Have fun! I hope you are healing well and cant wait to see you expand!

 

3000 for basics, plus cabinets, shelves, organization, pvc dust collection, air piping all the stuff to realy go the distance. if im cuting corners i might end up with just lights, electrical, insulation then do the rest little by little.

  • Author

I was pretty fortunate that my double garage was insulated and dry walled/mudded before I moved in.

I added lights, some new electric, and painted ceiling and walls. I have been battling my inner demons for years about what to do to the floor. Some days I think plywood subfloor is a great idea. Other days I think about epoxy. I wish I could just make up my mind! Right now it's bare concrete with a few pads.

The other issue I had to deal with was heat. The winters here are brutal cold, and the shop is unusable in winter without some type of heat. I added a ceiling heater that takes the edge off, but I will invest in a better heater this winter. I am going to go electric for ease of install and initial cost. The unit I chose will cost about 15 cents an hour to run.

I actually put a second shop in my basement for those REALLY cold days. I call it a shop, but it's really a hand tool workbench and a cabinet of hand tools. I do some joinery there, or make the occasional small, no power tools allowed, project.

 

ya need to figure out the best heat source since its a small garage my heat will fill the shop fairly quickly just need insulation to keep it in plus i live in a basement apartment so im used to the cold.

  • Author

my job is building some buildings what if i start taking a sheet of ply or insulation now every week then insulating the garage would be cheap :)   na but i could surface my walls in off cuts  then just mudding the entire surface. couple of my friends are roofers and i could get their particle and ply wood pieces free :)

I use a pellet stove in my shop and love it.  Easy to install and cheap to run. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.