Recommended Posts

Posted

If ever you want to know why a riving knife and a blade guard is a good idea here it is. Look at the slow mo had position!

When people mean kickback is this it? To me this is not kick back, it's crazy dangerous. I pleased to say our saws have riving knives and crown guards.

Posted

Yup, pretty scary. When I watch videos like this, everyone always mentions riving knives and guards. But what about splitters? They are a solid option as well, though not as good as riving knives. Are the presenters assuming that the guard includes a splitter?

Posted

Yeah don't be sorry I didn't mean it like that. It's a good reminder if you have the sack to watch it more than once...I don't. Gives me the willies. :shivers:

Posted

Guys, that's cool, I wasn't really sorry  ;). All joking aside though it was a scary one. I just hope he doesn't get a job here or we are all doomed. BTW, whats the difference between a splitter and a riving knife. A splitter is new on me. i had a assumed it was a different term for the same thing.

Posted

With a splitter it's usually attached via something that is sticking out the back end of the saw cabinet.  Which means the splitter has to get from the back of the saw half way down the cabinet all the way to the blade.  Which means it's quite a task to get it actually aligned correctly.  Then we take an el cheapo direct drive saw which vibrates so much that the longest you can actually get the splitter to stay aligned is 0.2 seconds.  Hence the splitter and guard end up being removed very quickly from the saw, because as dangerous as a kickback is getting the piece of wood stuck because it hits the splitter is not such a good outcome either.  And yet somehow only just recently did we start requiring riving knives. Go USA!

  • Like 1
Posted

With a splitter it's usually attached via something that is sticking out the back end of the saw cabinet.  Which means the splitter has to get from the back of the saw half way down the cabinet all the way to the blade.  Which means it's quite a task to get it actually aligned correctly.  Then we take an el cheapo direct drive saw which vibrates so much that the longest you can actually get the splitter to stay aligned is 0.2 seconds.  Hence the splitter and guard end up being removed very quickly from the saw, because as dangerous as a kickback is getting the piece of wood stuck because it hits the splitter is not such a good outcome either.  And yet somehow only just recently did we start requiring riving knives. Go USA!

Good points. I use the micro jig splitter on my saw, which I am quite happy with. It is custom mounted on each particular saw (with the supplied jig), and is attached directly in the throat blade. Much better than the stock splitter. The issue is, that in order to use the micro jig splitter you need to remove the blade guard, so it needs to be replaced with an over arm guard. My saw is older, so a riving knife is not available as an aftermarket upgrade. My next saw will certainly have one. Until then, I am very comfortable with my microjig.

Posted

Question for the guys that are lucky and have a new (newer) TS with a Riving Knife. Is a Riving knife adjustable for the kerf of the blade? Or do You need a few riving knives to match the blade kerf? Thanks  (for future reference)

Posted

Good points. I use the micro jig splitter on my saw, which I am quite happy with. It is custom mounted on each particular saw (with the supplied jig), and is attached directly in the throat blade. Much better than the stock splitter. The issue is, that in order to use the micro jig splitter you need to remove the blade guard, so it needs to be replaced with an over arm guard. My saw is older, so a riving knife is not available as an aftermarket upgrade. My next saw will certainly have one. Until then, I am very comfortable with my microjig.

 

The problem I had with the original micro jig splitter was that if you did have a board that bowed as it was being cut and it clamped down hard on the splitter it would rip the splitter right out if you forced the board through, bending the little plastic pegs and ruining it.  There's a metal one now that I may have to give a second chance to.

 

And Doug, I had looked into the Sawstop riving knife since that's the saw I plan on upgrading to in the future.  As far as I could tell it only has one riving knife available for it which is sized to be thin enough for a thin kerf.  I'm pretty sure there are saws with full and thin kerf riving knives though so I guess it just depends on the saw.  Even amongst full kerf blades there are different plate thicknesses, which I assume would shift the blade in the relation to the riving knife if you switched between them.  So I do wonder about how much more effort is required for blade changes.

  • Like 1
Posted

My riving knife is built into the saw mechanism and only comes in one thickness so if I were to use a thin kerf blade I wouldn't be able to use the knife.  It's kinda cool because it has three height settings: all the way up, all the way down and a halfway setting that's supposed to work with your dado stack ... if you have a 10" dado stack.  There's a push button that locks into the knife and a "thumbscrew" that locks it into place.  Because the blade guard and anti-kickback pawls fit onto the riving knife, I find myself more likely to use them all.  More likely than when I was using my cheap table saw that had a splitter and blade guard combo.

Posted

Question for the guys that are lucky and have a new (newer) TS with a Riving Knife. Is a Riving knife adjustable for the kerf of the blade? Or do You need a few riving knives to match the blade kerf? Thanks  (for future reference)

 

Hi Doug. A riving knife is a riving knife. Just a piece of metal made to suit 1 x blade thickness. A thinner blade would indeed require a thinner riving knife

Posted

Yea, i guess I wasn't thinking when posting this (watching/listening to all 24 hours of Le Mans, i blame). I didn't think the Riving Knife could get thinner,  i was thinking can it be adjusted left or right (looking at the blade from the front) like a splitter aligning the splitter to the fence side of the blade.

Posted

GS, I have to admit, I ordered my Grizzly TS a year ago and have never installed the riving knife. That's the first order of business TODAY. Thanks a ton for the information and the youtube video.

Posted

Reading through this thread, and watching that video again, I decided it was time to reinstall the microjig splitter I bought years ago.  I had it on this saw with the original fence, and it worked well, then I upgraded the fence, which was much more true then the old one, and the fence caused it to be too tight.  So awhile back I bought a new ZCI with the purpose of reinstalling it.  Then I put it off and off some more while working to complete my last project.  Pushed a few test pieces through after installing it, and it now works exactly as it should.

 

784106883.jpg?1372026266

Posted

I have an older PM66, a knife is not an option so I went with the micro jig. I had some problems with the plastic one and customer service is working with me to get the pro metal setup, I can report back later after I get it and it is installed, ... and I get back from vacation next week.

 

I use feather boards, mag lock and Gripper and it is still uncomfortable without the splitter. I have had kickback and it is not fun, not at all.

Posted

I have an older PM66, a knife is not an option so I went with the micro jig. I had some problems with the plastic one and customer service is working with me to get the pro metal setup, I can report back later after I get it and it is installed, ... and I get back from vacation next week.

 

I use feather boards, mag lock and Gripper and it is still uncomfortable without the splitter. I have had kickback and it is not fun, not at all.

 

Biesemeyer and shark gard both have better options for the pm66

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 55 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined