duckkisser Posted July 6, 2013 Report Posted July 6, 2013 is a used floor standing drill press from a friend worth 120 bucks even if it is a craftsman? don't know what condition it is but I trust its in decent shape since this guy is a machinist and he takes care of his tools.is that an average price or a good price. he said its around 10-20 years old. Quote
wdwerker Posted July 6, 2013 Report Posted July 6, 2013 If it is 1/2 hp or better and there isn't much slop or play in the spindle I would say go for it. Rust on the column, loose handles or a non working depth stop would be points to discuss a lower price. A vise or other clamping devices would be a plus. Consider the throat depth, from the center of the chuck to the column, this is the limit of your ability to drill the center of a blank for your lathe . Inspect the drill chuck, missing teeth or stiff movement is not good, but loose and too much free play is also bad. Quote
rodger. Posted July 6, 2013 Report Posted July 6, 2013 I bought a 1/2 HP ridgid standing drill press used from kijiji. I think I paid 120 as well. It's a good press and was worth the 120. I think it goes new for 300 and change CDN. It was heavy. You may want to bring a buddy to help you lift and maneuver it. Quote
wdwerker Posted July 6, 2013 Report Posted July 6, 2013 Older is probably better. Consider either bolting it down or mounting it to a wider base for stability. Clamping things down before you drill them is a good idea. I have seen drill presses take a piece of metal or wood away from your hand, swing it around and whack you with it so fast it will make your head spin. This also can bend the shaft and ruin the tool as well as break your hand. Quote
Alan Bienlein Posted July 6, 2013 Report Posted July 6, 2013 That depends. My wife paid $169 for a brand new floor model drill press that served me well for 7 years. I consistently see very similar models sold by Grizzly, Jet, Delta and others for two and three times the price. I wouldn't even pay what they are asking for the PM2800 or the Delta 18-900. Now this past week on craigslist I came across a Wilton A5816 variable speed drill press for $150 and had to think long and hard for about 2 hours before contacted the seller. Now it sits in my shop all 426 lbs of it. Quote
Tpt life Posted July 6, 2013 Report Posted July 6, 2013 Uh, I thought the accepted way of determining scale in this forum was the use of a beer bottle:-) 1 Quote
duckkisser Posted July 6, 2013 Author Report Posted July 6, 2013 I doubt its as large as that behemoth Quote
Byrdie Posted July 6, 2013 Report Posted July 6, 2013 "You want me to stand where?!" "Why?!" "I don't even have my shoes on!" Ok, but only if it takes a minute." Quote
wdwerker Posted July 6, 2013 Report Posted July 6, 2013 Wow, now I have drill press envy. Didn't even know that was possible! 1 Quote
Alan Bienlein Posted July 6, 2013 Report Posted July 6, 2013 Uh, I thought the accepted way of determining scale in this forum was the use of a beer bottle:-) I would if I had a beer bottle but I also don't set drinks on any of my tools. Something my father instilled in me a very long time ago. "You want me to stand where?!" "Why?!" "I don't even have my shoes on!" Ok, but only if it takes a minute." My wife was the next best thing to get a sense of scale when a beer bottle isn't available. She actually helped to load and unload it from the back of my pickup. Wow, now I have drill press envy. Didn't even know that was possible! You just gave me a good laugh! I think the only reason I do have it is because of its size. When my wife saw the pictures in the craigslist add her mind was made up right away to get it as she just loves big power tools. I kind of have to reign her in some times. Quote
Tom King Posted July 8, 2013 Report Posted July 8, 2013 Alan, You should get her a t-shirt made that says, "I like a man with a big tool". Then send more pictures. 2 Quote
Spencer_J Posted July 14, 2013 Report Posted July 14, 2013 Serious drill press envy. WOW! The price was right for sure. In my area that thing would get $4-600 easy. Congrats on that find Quote
calblacksmith Posted July 16, 2013 Report Posted July 16, 2013 As said above, a lot of it depends on condition. If you have the room, it sure is nice to have a floor standing drill press. Some tables only go half way down and some go a lot further, it just depends on who made the tool. I have a converted tapping machine as a floor drill press. It is rock solid but my table only goes half way down. There are no holes or slots in the table either so a vice must be clamped to the table. $120 for a well cared for drill press is a pretty good price and if you can get a vice or some other goodie added to the mix, that would be even better Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.