Andrew Pritchard Posted July 12, 2013 Report Posted July 12, 2013 My jigsaw has its limits - mostly that I often don't end up with 90 degree cuts. And of course, I can't resaw with a jigsaw. I don't really have the money to buy a 14" bandsaw right now. So I guess my question is - is a 9" bandsaw worth it? Quote
mikem Posted July 12, 2013 Report Posted July 12, 2013 For resaw... Probably not. For curve work on 3/4" stock, it will work. I used a couple 9" bandsaws for many years quite successfully. In fact when my son was in cub scouts many years ago, we held workshops where the scouts could bring their cars and the cars would get cut out for the scout. After he moved on, I did replace the remaining bandsaw with a 14". (The first one was a Delta Shopmaster. It broke. Avoid that one. The second one was a Ryobi, a few generations old. That was a decent machine) One saw to consider, is the Craftsman 10". The few people I have heard that own that one have been very happy with it. It is a less expensive clone of the Rikon 10". Quote
krtwood Posted July 12, 2013 Report Posted July 12, 2013 I wouldn't do anything less than a 14". Didn't have a great experience with the Ryobi 9" 7ish years ago. The anniversary edition Grizzly G0555 is a good deal right now. A 14" band saw is like a Civic, a 9" is a moped. 1 Quote
Pwalter5110 Posted July 12, 2013 Report Posted July 12, 2013 If you do look into grizzly, I have a 10% off coupon that should work for you. I got it in an email, but only 4 days remain until it expires. PM me if you really want to use it. Quote
Pwalter5110 Posted July 12, 2013 Report Posted July 12, 2013 If the grizzly is still a little to costly, harbor freight has a 14" bandsaw. If you can get ahold of a 20% off coupon it will be under $300. Obviously with harbor freight, it won't be top of the line. But a lot of people have had success tuning them into respectable machines. The key is a lot of fine tuning and a high quality blade. Quote
knotscott Posted July 12, 2013 Report Posted July 12, 2013 The 9" saws will cut if they're fitted with a decent blade, but they're light, small, not powerful, and vibrate more. I'd look to a used saw if price is the driving factor for a 9". If you still end up looking toward a new 9", consider the 10" Craftsman or Rikon instead....sturdier, heavier. Quote
duckkisser Posted July 12, 2013 Report Posted July 12, 2013 remeber you can cut a 9 inch block on 14" bandsaw but you cant cut a 14" on a 9 ". i bought a older jet for 130 bucks same price as a 10" new bandsaw. got it from a newspaper add im shure you can find a decent priced saw used Quote
Andrew Pritchard Posted July 12, 2013 Author Report Posted July 12, 2013 I've been watching Kijiji to see if any 14" ones come up. They're often as cheap as a new 9" saw. OK - so what should I look for (and more importantly avoid) on a second hand bandsaw? Quote
mikem Posted July 12, 2013 Report Posted July 12, 2013 Make sure you get at LEAST a 1HP motor. Avoid the Ridgid 14" bandsaw. Quote
dwacker Posted July 12, 2013 Report Posted July 12, 2013 I'd save penny's and get get the best saw you can within reason. Stay away from elcheapo's like Harbor Freight and the bottom of the barrel Grizzly's. If you have to constantly fiddle with the saw or have constant issues you will never really get to understand just how versatile a bandsaw can be. A good saw is worth its weight in gold but a piece of junk is just dust collector that will never get used. Quote
Andrew Pritchard Posted July 12, 2013 Author Report Posted July 12, 2013 Round my way a new 9" is $150 or there abouts. A new 14" is closer to $500. So you see my predicament. I'm in Canada, so there is a big difference in prices from the US, and also there is a substantial difference in availability too. Quote
Byrdie Posted July 12, 2013 Report Posted July 12, 2013 So to answer the question of what to watch for on a used band saw: -check the wheel bearings for excessive wobble or looseness. -if the table has trunions to tilt it, make sure they aren't rusted or caked with waste that makes them inoperable. Conversely, make sure they aren't so loose that the table won't hold its position -make sure the upper guide adjustment still works so that you can move it up and down in relation to the workpiece. - make sure the motor works, you don't want to add the expense of a new motor to your used saw. Things not to worry about: -a rusty table can be cleaned up easily. -missing or worn guide blocks are available at all sorts of price points and from simple to extravagant. -you're going to want a new blade any way. That should give you a basic list of things to check on a used saw before purchasing. I'm sure there might be some small details others can add. 1 Quote
woodieboy Posted July 12, 2013 Report Posted July 12, 2013 Better to go for 14" band saw with 1-2 HP. Quote
PeteJr Posted July 14, 2013 Report Posted July 14, 2013 I recommend a 14" Powermatic but be prepared for very poor dust collection. Quote
ColinF Posted July 15, 2013 Report Posted July 15, 2013 I have a 9" delta bandsaw, don't plan on doing any resawing with them. I mean, it will, but they just aren't made for it. I resawed a piece of 4/4 walnut because it was only 2" wide and it was only 12" long, but it sure didnt like doing it. I would love a 14", but money is the factor keeping me from it. I'd settle for a masterforce one on clearence, it can't be that bad! If you can get a 14 used, I would advise you to do that over buying a new 9". 1 Quote
woodieboy Posted July 16, 2013 Report Posted July 16, 2013 If you're leaning towards used band saw , these are the things you should look for. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.