Recommended Posts

Posted

I was inspired by an episode of Woodwright, so I made this form memory. No plans, I just followed his advice on making the cabinet from the boards that are available. Start with the back, and make everything else fit.

 

Pallet Wood...

 

72614_10201594238405967_977708477_n.jpg

 

 

Very rough mock up. 

 

164986_10201594241686049_1576875141_n.jp

 

Rear panel bead detail...

 

1069850_10201594244286114_1637566240_n.j

 

This is as far as I got in a few hours this morning. From pallet wood, to all pieces jointed and planed smooth. I even beaded the joint on the back panel for effect. This is basically a Shaker inspired tool cabinet. 

 

After lunch...

 

1002539_10201595770124259_2032364524_n.j

 

1011522_10201595766964180_1481276241_n.j

 

I took this sorry free pallet from work and turned it into this. I will be painting this piece with Milk Paint this week. All that's left is the shelves and face frame, with a bit of shop made molding on the top.

 

Not exactly my finest piece, but for what it is I like it! 

 

 

Posted

Cutting loose with an air nailer feels even naughtier! Old School cut nails and risking your fingers getting whacked has a lot of historical precedence . And even with pallet wood if you are using cut nails near the end of a board splitting is a possible risk. A lot of the old rough work was built with green wood and cut nails.

Posted

There was a pic posted on Facebook today of Sir Roy's finger after a whack. Nothing like the good ol' hammer and nails. 

 

I like the cabinet, good use of materials 

Posted

Well, the no whole no planning thing didn't work out perfectly. As it turned out the cabinet was too narrow to store my #6 plane on a shelf. After some thinking, I decided to flip the darn thing on its side and add some shelves.

 

 

1069839_10201618715137870_1225941771_n.j

 

Milk paint round one. This was my first time using Milk paint.The first coat didn't cover as I expected. So, a quick round with the shop fan was in order!

 

1002872_10201618715257873_127853371_n.jp

 

Second coat last night. There was about 30 minutes in between coats. Here is how I left the shop last night.

 

1075854_10201618715617882_1224337446_n.j

 

This morning, I went out to the shop and it was looking good! So I decided to clear off the bench, and screw it to the wall, and put some tools in! Here it is:

 

1075856_10201618716257898_2084527773_n.j

 

 

I really like how this small project turned out. If I planned it out, I wouldn't have done it exactly like this, but I'm sure I would have spent too much time trying out where to put every plane and saw. This was much more productive. An old beat up pallet, a few days, and I have a nice tool cabinet. Now, I just need to fill those empty spaces with some more tools! :)

  • Like 1
Posted

Thanks! I do have a Stanley 45 coming my way, I just couldn't resist any longer.

 

I do have plans for a nice jointer plane, perhaps the Lie-Nielsen #8, or the low-angle 7 1/2. I do like the Low-angle Jack I got earlier this week. I should have bought that plane first, and saved myself a few bucks! Very versatile plane!

Posted

Was that top shelf set back for the saws or for the smaller planes?  (And I have to say I love that "built in saw till" effect.)

 

Nicely done!  

Posted

Was that top shelf set back for the saws or for the smaller planes? (And I have to say I love that "built in saw till" effect.)

Nicely done!

Thank you!

Both :)

I wanted to keep everything together. I wanted to have the saws hanging so I can see the entire saw, not just the handle.

The top shelf is set back also to allow more hand room to reach for items on the second shelf. It also allows me to store my mallet vertically, which takes up less space.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.