Recommended Posts

Posted

Well, it's finally done. It took me 4 months find the stock i needed.

I drove 3 hours round trip and bought five 14 foot lengths of 6/4 walnut. i. surfaced them on one side by hand. Then I ran them through the thickness planer individually. Then I jointed by hand using a veritas jointer plane. Finally I glued up in sections, and flattened by hand. Cleaned up with sandpaper up to 220, and used a block plane and 400 grit sandpaper for the exposed end grain.

Finish is 8 coats of general salad bowl finish, which I wet sanded with 400 grit wet/dry paper.

This thing is a MONSTER and is very hard to move. I did a dry fit, and then scribed to the wall. Of course, a 13 foot section of drywall is nowhere near flat, so there was some work to be done. Currently, it is pulled out about an inch from the wall, so I can wax it when the finish fully cures. Then it will be pushed against the wall and screwed from below using oblong holes.

Whew, glad I don't have to lift that thing anymore!

post-6372-0-60300800-1376160443_thumb.jppost-6372-0-06812900-1376160507_thumb.jppost-6372-0-09865500-1376160556_thumb.jp

Again, photos are with my iPad, so not excellent quality. Thanks to the guys who helped me with a few minor defects(C. Schaffer, Baotworks, particle, steve, TKF, Graham, Woodsap). The epoxy trick worked great!

Posted

The salad bowl finish holds up really well under regular use. I have had the smaller sections complete and in use for about 6 months. They have had lots of spills, etc with no scars or stains. I poured red wine and coffee on a maple test piece that was finished with salad bowl finish, and left it for 3 days. Cleaned right up with no staining. General makes great finishes!

Didnt want to fancy up the top too much with inlay. Wanted a clean, well finished end product. I did consider it though ;)

Posted

Congratulations ! Looks awesome! As someone who has done long solid wood tops in a small shop I can fully appreciate the time and effort that went into that top. Beautiful finish as well. I bet you used every clamp in the shop to glue it up, didn't you?

Posted

Congratulations ! Looks awesome! As someone who has done long solid wood tops in a small shop I can fully appreciate the time and effort that went into that top. Beautiful finish as well. I bet you used every clamp in the shop to glue it up, didn't you?

Haha, absolutely - every single clamp. I also used a pile of shop made cauls, and biscuits.

Posted

i was thinking about replacing my work tops with real wood. I think i might give it a miss lol

 

Really wish that was in my kitchen. Come do mine i'll pay for your flight ;)

Posted

Ah, Franklin you are going to have to move now.

At least I would have to.

I wouldn't want to be there when somebody scratches it.

 

I can see me yelling at my son. "Were you really planning on cutting that apple on the counter!?!?"

"Ah, yeah."
"You now better than that. Cut it on the floor, for crying out loud. ... and wipe your prints off the counter."

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   2 Members, 0 Anonymous, 39 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined