Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Good Plywood?

Featured Replies

I am starting a new project, and I was specifically told to use "the good stuff".

As far as I know Baltic Birch is the "good stuff". Is this right? Is the good stuff available at Home Depot? Is all Baltic Birch the same?

My hardwood dealer sells "shop grade" sheet goods. I have no idea what that means. I should call them :)

The plywood parts will be painted.

The only big box store I have found something labeled Baltic Birch is Menards, though I am skeptical that it is the real stuff.  Baltic Birch comes in 5'x5' sheets, rather than 4'x8' sheets, which is what Menards has.  The nice things I have found with BB Ply is it is very flat and that the thickness is as advertised.  3/4"  BB Ply is 3/4". 

 

The drawbacks with BB Ply, is it tends to be a bit more expensive.  Also there is more patches in the faces and tends to be a bit more rough, requiring more sanding.

 

I have used BB Ply for a few projects now.   I used it for the bottom of the cradle I used last year, and I used it for the backs on the 3 boxes that made up my hand tool cabinet. 

Apple ply is a excellent product SPENDY comes in 4x8 sheets http://appleply.com/ I've also used Russian birch ply I was able to buy that in 4x8 sheets.

what part of the project is it for?

  • Author

what part of the project is it for?

It's for the Bench Crafted Shaker workbench I'm making. The base is constructed using cabinet construction with a solid wood face frame. I'll also be using solid wood for the back of the case.

My first thought was to use only solid wood, but an email to Jameel and his lightning fast reply made me feel at ease to use the ply.

I have experienced serious problem (voids, veneer lift) with imported plywood from the big box stores and will not use it again.

As Pete mentioned, the BORG and Blue Giant sell crap. The veneers are so thin, if you breath on them the wrong way they will delaminate...

 

There were only two occasions the BORG ever sold me good plywood.... Arauco plywood, which is made in Ecuador is a pine plywood product and the veneer is as thick as the rest of the plies which means you can sand and plane the surface to make things fit nicely, almost like working with real wood, but in panel form! Routes well, etc. This product is still listed under a search for Arauco, but it is not the same product. When you go to the store there will be an AC panel made in china with a paper thin veneer. At about $36/ sheet 23/32" its shop grade at best...

 

The second good piece of ply I ever got was made by a US company, it was a PureBond sheet in white birch. Nice material, veneer was also somewhat thicker and you could take a few light passes with your plane. Sadly, I have seen newer batches and the quality is not even close to what I bought in `08.

 

Solution, talk to some of the cabinet shops and ask where they buy their plywood. You can ask and see if any will piggyback a few sheets on their order for you or see if the supplier will sell direct to you. I have a place that I can go to and have visited to drool...

The sheets there are amazing. Many are calibrated in thickness, meaning each sheet will measure out to 3/4" thick. Some are prefinished with uv catalyzed top coat, some amazing sheets! Price also amazing!! In my area, a 3/4" sheet of imported plywood in birch is roughly $80, the US made one is about $130.

 

I hope you don't need much!

I buy my plywood from Gueydan Lumber near New Orleans and I pay about $40/sht. for Chinese Birch Crap and around $45/sht. for domestic Birch. That's all I use for paint grade cabinets and tend to go domestic because it is square. I've seen the CBC as much as 3/8" out of square and had some sheets that were delaminating in the middle. I shy away from it now. The stores will refund your money for the faulty ply, or exchange it, but the time and aggravation just aren't worth the savings. 

==> Baltic Birch comes in 5'x5' sheets, rather than 4'x8' sheets, which is what Menards has.

 

My hardwood dealer stocks 5'x5', 4'x8' and 5'x10' BB...  I've never purchased 5'x10' because a sheet would be just too hard to manhandle...  They also have 4'x12' on their board, but it's special order...  God knows what it would weigh...

Hey Mel,

 

I bought a sheet of Hard Maple plywood from KM awhile back. That piece was absolutely stunning. No defects that I could see to the naked eye, or voids that I came across. I was very pleased with the product.

 

Here is how KM defines their "shop grade" plywood:

 

 

Most of our inventory is in a shop grade material. This means that the plywood was intended to be a high grade product with thicker face veneers and more plys, but because of some defect did not make the standards for the high grade. It may have a broken corner, a small area of void, or a sanding error. Customers who will be taking the 4x8 sheet and cutting it into smaller pieces find this shop grade material to be a better value. Its lower cost will make up for the waste you may experience.

I like shop grade white birch for my shop projects. It was around $35 a sheet before the Great Plywood correction that happened last year? Near $60 last I checked.

Sent from my HTC One using Tapatalk

I make almost all of my jigs out of BB.  It's super-stable but costs way less than the high dollar ply with hardwood skins.  That's what I'd use if I were going to paint it.  Never ever buy Troy's CBC.  I did that...once...and never again.  Voids, footballs all over it, delaminates if you breathe on it wrong or a pigeon shits on it.  And the worst part...turns into Pringles by the time you get home.  Garbage.

 

Stay away from the box stores and buck up the few extra dollars for the good stuff...this is going into your bench, after all...not a time to get cheap.

  • Author

I don't mind paying the extra for the good stuff. I just didn't know what the good stuff was :)

This will be my first time using sheet goods on a large scale.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.