Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Owners of Rigid OSS

Featured Replies

Hey guys, if you can help me out with a little information, I would really appreciate it! I am interesting in buying a Rigid OSS, but my recent research into some of their other tools has left me wondering if the quality is still good. I was looking also for a ROS and read a lot of bad info on the recent ROS made in the US while other markets had better units sold to them! I know that this is not a thousand dollar item, but it's still $200 and I certainly don't want to waste that.

 

If you can, please look at the nameplate of the machine and see the model number and any other information that might be on there. Please also tell me the year it was purchased. I am looking to see if there are revisions made to the machine. Maybe there is model number with a dash after it or a letter after it to indicate a change. Please don't post your serial number!

 

As many folks that could reply with differing years of purchase would be an awesome help!

 

Thanks in advance.

CnH - I would not mix comments on reviews from one tool, with another.  My experience with Ridgid has been that some tools are decent, and others lacking.  For instance, I have the Ridgid jointer - based it on the price point and the reviews out there, and I've been happy with it.  However, I stayed away from the Ridgid bandsaw.  

 

I have read a lot of good things about the Ridgid OSS - in a nutshell it seems to be a lot of bang for the buck.  No doubt it won't be like a larger unit that has a nicely machined cast iron top - but you can't get such a unit for the same price of the Ridgid.

I received the Ridgid OSS as a christmas gift last year.  It has gotten quite a bit of use since I got it, more than I thought I would actually.  It is a great machine for the price.  I don't own a Ridgid ROS so I cannot speak to that.

I love my Ridgid OSS. I use is it all the time. Make sure you send for the protection plan. Better safe than sorry! :)

  • Author

EB44242 is the model number on my nameplate.  I bought it in 2011 and have been happy with it and would recommend it.

Thanks Dave, I appreciate that. I am just curious if that is what I will find at HD next time I am there. For the money, I agree, I think it is a lot of machine. A little on the large size, but I think it would be cool to mount that on one side of a mobile cart with my planer on the other side. Will have to create some kind of lidded storage for all those pieces that store on the machine or some kind of twist lock. I can see them going all over the place when flipping over!

 

I currently use an inflatable drum on my pos drill press.

 

CnH - I would not mix comments on reviews from one tool, with another.  My experience with Ridgid has been that some tools are decent, and others lacking.  For instance, I have the Ridgid jointer - based it on the price point and the reviews out there, and I've been happy with it.  However, I stayed away from the Ridgid bandsaw.  

 

I have read a lot of good things about the Ridgid OSS - in a nutshell it seems to be a lot of bang for the buck.  No doubt it won't be like a larger unit that has a nicely machined cast iron top - but you can't get such a unit for the same price of the Ridgid.

 

The reason I am comparing different lines of tools is because if the manufacturer is skimping on costs, I would think it would affect the entire line, not just revisions and new offerings. In other words, if they have the ability to save a few cents by using a cheaper capacitor with poorer specs, they will go for it and that will not necessarily be shown by way of revision number. Caveat emptor I guess..

I don't think I would go so far as to say a mfg. that cuts cost on one tool in a product line also cuts cost on all the other tools they make.  Some companies are very good at making certain tools and not so good at making others.  They tend to be very proud of the ones they make very well and don't usually fool around with the quality control of those tools.  The old adage "no company makes all the best tools" is very true. 

I picked up one of these in late 2011, have put a good amount of hours on it, and would buy another if it broke today.      I forgot to register the warranty...    :unsure:

 

Mine sits on one end of a plastic shop cart, with a 12" disc on the other, and my rarely-used scroll saw on the bottom shelf for ballast.  I roll it into place, chock it, plug in the power and vac, and sand away...

 

I really like the dual usage, and the dust collection is very good.   I don't connect the sander to my cyclone, smaller tools work better with my drywall bag and $20 auto-switch equipped Shop-Vac.   This is a rare tool that seems like it should sell for more than it does.

Mine actually died the other day, and I needed another one right away. The manager at Home Depot was super awesome. He took mine in for repair, and sold me a new one with a $50 discount. He said that was the best he can do, and I can always take the new one back for a refund when the old one comes back. That is customer service!

 

After thinking about it, I am going to keep both of them because they are just to handy.

 

I really like the dual usage, and the dust collection is very good.   I don't connect the sander to my cyclone, smaller tools work better with my drywall bag and $20 auto-switch equipped Shop-Vac.   This is a rare tool that seems like it should sell for more than it does.

 

I got one of these about 2 months ago and I have to say that the dust collection is very lacking.  Kind of a disappointment really.   I had a Harbor Freight OSS prior to the ridgid.  On the HF hooked up to my shop vac there wouldn't be a speck of dust anywhere.  Impeccable dust collection.   On the ridgid after about a minute of use there is dust all over the table. 

I got one of these about 2 months ago and I have to say that the dust collection is very lacking.  Kind of a disappointment really.   I had a Harbor Freight OSS prior to the ridgid.  On the HF hooked up to my shop vac there wouldn't be a speck of dust anywhere.  Impeccable dust collection.   On the ridgid after about a minute of use there is dust all over the table. 

 

Mine works fine with a shopvac hooked up to it. The belt attachment throws a little bit more dust, but it's not horrible. 

I bought mine in 2006 ... I think.

Anyway, part number EB44241, made in Taiwan. It's orange, at the time I think some of the older ones were grey.

 

I've been really happy with it. Paid $150 on sale. It's almost always $200. I've seen people sell them on ebay for up to $300, which always baffles me.

 

Works fine with a shop vac, but I hook mine up to the clearvue cyclone now and I find it works even better if I open a blast gate on the other side of the shop at the same time.

 

I wouldn't hesitate to recommend it. I only have 2 other Ridgid tools in my shop. One's a shop vac, the other are some out-feed stands.

I got one of these about 2 months ago and I have to say that the dust collection is very lacking.  Kind of a disappointment really.   I had a Harbor Freight OSS prior to the ridgid.  On the HF hooked up to my shop vac there wouldn't be a speck of dust anywhere.  Impeccable dust collection.   On the ridgid after about a minute of use there is dust all over the table. 

 

 

Is there something wrong, like leftover packing material where it shouldn't be?   Are you having problems with the spindle or belt? 

No everything seems to be in fine working order.  It just doesn't collect all the dust.   I'm not saying it's terrible but compared to the HF it leaves a lot to be desired. 

 

Does yours collect all of the dust, or do guys still have some on the table when you are done?

I got one of these about 2 months ago and I have to say that the dust collection is very lacking.  Kind of a disappointment really.   I had a Harbor Freight OSS prior to the ridgid.  On the HF hooked up to my shop vac there wouldn't be a speck of dust anywhere.  Impeccable dust collection.   On the ridgid after about a minute of use there is dust all over the table. 

 

Perhaps the HF wasn't sanding anything.  :lol:

I have used my shopvac with my Ridgid OSS and have found little to no dust on the table.  I mostly use it in the spindle mode.

I have a ridgid jointer and planer. Both have been great machines.......that does not mean that ridgid makes all their tools as good a quality. Name is not what you are buying .....it's the tool. But these machines I have used and are fantastic

Sent from my iPhone using Tapatalk

  • Author

I bought mine in 2006 ... I think.

Anyway, part number EB44241, made in Taiwan. It's orange, at the time I think some of the older ones were grey.

 

So we have EB44241 from 2006 and EB44242 from 2011.

Would be interesting to see what Mel's new machine is stamped. Is your new machine also made in Taiwan?

Mine is 44242, bought in August 2011. My dust collection, at least in belt mode, is simply ok.

  • Author

EB44242 made in China :(

Bummer. But not too surprising. Thanks for the assistance ;-)

  • Author

Mine is 44242, bought in August 2011. My dust collection, at least in belt mode, is simply ok.

How about your machine, was it made in China or Taiwan?

How about your machine, was it made in China or Taiwan?

 

Didn't think to look. Today was the first time I've used it in at least a year. The pratfalls of working with plywood primarily.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.