Bill Tarbell Posted June 14, 2014 Report Posted June 14, 2014 I'm searching to buy a vintage #7 | #8 plane. The earlier models tend to have the frogs with almost full surface area (which seems beneficial), but they lack the frog adjustment screw in the rear. I'm still a beginner and I have little experience with hand planes, so i'm curious on how often the mouth gap really needs adjusted and how much convenience the screw truly provides. I tend to be frugal so I foresee that i'll mostly be working with domestic hardwoods such as oaks, maple and cherry since they're available for cheap prices at local sawyers. I'll be using a power planer for the main flattening and am only planning on using the hand plane to clean up seams after gluing. I'm guessing i'd leave the jointer plane set at a thin shaving due to only using it for minor work. If that's the case then am i safe in assuming that I'll likely only set the frog once and leave it there? Feel free to chime in with how you use your jointer plane and how often you change it's setup. (picture of an adjustment screw for reference for other beginners. It's the lowest screw in the pic) Quote
Tom King Posted June 14, 2014 Report Posted June 14, 2014 Once I get one set up like I like it, I don't remember ever going back and changing the frog position. It's not a big deal to adjust the frog even without the screw. I do have multiples of some sizes of planes for different cut depths, but not jointers. I keep a 7 with a cambered iron for panels, and an 8 with straight iron for edges. Quote
Bill Tarbell Posted June 15, 2014 Author Report Posted June 15, 2014 Thanks for the info, Tom. I went ahead and ordered this stanley #7 from ebay. The rust looks pretty thin so i'm hoping the hardware cleans up in some evapo-rust (I saw others had pretty good success with the stuff). I'm thinking i'll try to repair the tote and see how it goes. There's a crack midway up and the tip is broken off. It seems like it should be kind of fun to splice in a repair like these guys did. If it fails, well, then i guess i'll just buy another tote tote repair 1 tote repair 2 Quote
jhl.verona Posted June 15, 2014 Report Posted June 15, 2014 I think you have a good eye for a bargain there. Before you go mad over the restoration, I'd clean up and sharpen the blade. If you can get reasonable shavings with the plane as is, then you can invest the time (and a little money) getting it back into pristine condition. A #7 is a big plane, so I'd only work on the sole if it is needed. For the rest, as you say, there are rust removers, and spray paints. Repairing the handles will make the plane 'your own', and it doesn't really matter how bad it looks, as long as the handles are comfortable to your hands. Have fun John Quote
Tom King Posted June 17, 2014 Report Posted June 17, 2014 Make sure you use a good screwdriver, that hasn't been used for scraping paint off of concrete, on the frog screws. They're soft, and easy to booger up. The threads are some weird pitch, that I forget what it is, and you can't find replacements in a hardware store. Quote
jhl.verona Posted June 17, 2014 Report Posted June 17, 2014 Weird? Whitworth weird? Nah. http://lumberjocks.com/WayneC/blog/38068 John Quote
Trip Posted June 17, 2014 Report Posted June 17, 2014 ==>rust And now for a message from the WTO PC Police: we're using 'deep patina' or 'oxygen enhanced' these days... Quote
jhl.verona Posted June 17, 2014 Report Posted June 17, 2014 Sorry. Oxygen enhancement removers, then. Or deep patina shallowers, if you prefer. 'Scuse me while I go and trademark these names.... Done. You can't use deep patina shallowerTM without the TM symbol now. DPSTM is OK. Mah lawyah sayd so. Very off topic, but... Ok, in the late 80's in Italy there was a program called 'Indietro tutta!' written and hosted by Renzo Arbore. Now the Italian state television has always had advertising, but he managed to produce an hour long show without any interruptions. Except that.. he added his own 'advertising' for Cacao Meravigliao - a Brasilian Cocoa product. Only that it didn't actually exist. It got to the point that supermarkets would put up a sign saying "We don't have Cacao Meravigliao - so please don't ask". Now THAT is humour (even without the u). But don't let that stop you asking for DPSTM in a Woodcraft near you! (Graham - we'll split the profits 50/50, OK?) John Quote
wtnhighlander Posted June 17, 2014 Report Posted June 17, 2014 Weird? Whitworth weird? Nah. http://lumberjocks.com/WayneC/blog/38068 John Those 12-20 screws are pretty easy to drill and tap to 1/4"-20, if you don't mind having a vintage plane that isn't quite cherry. For a daily driver, it sure beats hunting for those oddball screws. Quote
Bill Tarbell Posted June 17, 2014 Author Report Posted June 17, 2014 Awesome, thanks for the tip on tapping the threads. Hopefully i wont need to, but at least i know to just grab the tap&die set if i do I don't care too much on how the plane looks as long as it works effectively. It was purchased at a relatively cheap price and it's 100 years old, so i'm ok if it doesn't win any beauty contests. Quote
RichardA Posted June 17, 2014 Report Posted June 17, 2014 Setting the frog is simple, it just requires that you do it several times, till you get the curl you need. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.