Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dresser, to match the rest of my bedroom!

Featured Replies

I figured Middle Tennessee there had to be a still involved with those taters . We just had bootleggers learning how to race cars around here.

  • Replies 98
  • Views 17.5k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Okay, enough,,,, You disrespect my cigars, now you call me a drooler.... You live near  an unusual mayor of Houston, and how do you know I slobber?  You're to far away to see that!     If I were on fa

  • My boxer usually resembles that remark too ! Drooling over primo wood is nothing to be ashamed of. But drooling over pedestrian red oak is borderline!

  • That's why there were 7,421 measurements.... There's a hole in my jeans... Makes it easier to hit the throne!!!

Posted Images

  • Author

Well, I got a little more done.  Most of the internal construction is completed.  In all my measurements, surprisingly the worst out of shape anywhere within the case is no more than 1/16th !  How I got that lucky is beyond me!

   In trying to keep the drawers all one continuous board, though split, I puled a "Freddie"....Measured once and cut twice!   Didn't work!!!  Now I have to re-mill another board.. PIA!

    When that's done it'll be awhile before I get to actually making the drawers, The box jointing is going to take me a bit more time.. I just don't want to screw them up!

post-15288-0-34048000-1410702118_thumb.j

post-15288-0-08460700-1410702137_thumb.j

Really looking sharp Richard!

 

I would say attention to detail is the reason your measurements turned out well for you!

I constantly check parts for accuracy when batch cutting things like drawers. It can get boring and repetitive , that's when errors start to creep in. Out of square and slight variances in length will add up to a bad fitting drawer. I use calipers to make sure thicknesses of boards and box joint teeth are consistent.

Good luck!

  • Author

I constantly check parts for accuracy when batch cutting things like drawers. It can get boring and repetitive , that's when errors start to creep in. Out of square and slight variances in length will add up to a bad fitting drawer. I use calipers to make sure thicknesses of boards and box joint teeth are consistent.

Good luck!

   Thank's for the offering of luck.... But I'm not batching these drawers..... Gonna make each and everyone one at a time, I want this right!

I consider box joints to be kinda batch cutting, so repetitive ! Bold markings can keep you from cutting the starting knotch in the wrong place.

  • Author

I consider box joints to be kinda batch cutting, so repetitive ! Bold markings can keep you from cutting the starting knotch in the wrong place.

Hey Steve.... I know what a knish is   But what's a knotch?    Feel the tug on your leg?

  • 2 weeks later...
  • Author

Here's a little catch up on the dresser build..  I did a little dry fitting prior to making the drawers.   Wouldn't you know it, I pulled a Freddie..[Measured once and screwed up, now I have to cut twice].   I did however get some time away from a whole lot of home stuff that had to be dealt with, and put together the drawer pulls, only needed 16 of them.  Made one blank of oak and walnut, cut out exactly 16 with 1/2" left over!  Hope I don't screw one of them up!  You can see where I pulled  that "Freddie"!

   Gonna start on the box joints for the drawers in a day or so, even with a jig, it takes some trial and error to get it right.... Got my fingers crossed!

post-15288-0-56419700-1411675874_thumb.j

post-15288-0-86340200-1411675893_thumb.j

post-15288-0-80458200-1411675909_thumb.j

Richard, this thing is really looking good. Are you using a commercial box joint jig or a self made one?

  • Author

Really looking sharp Richard!

 

I would say attention to detail is the reason your measurements turned out well for you!

Yup, that's why one set of drawer front's aren't showing... I miscut one side, and I want to keep the grain pattern through both drawers, so I have to make a short road trip and get another piece.    I've tried to keep grain direction and pattern a focal point, even if I'm the only one that notices.

  • Author

Richard, this thing is really looking good. Are you using a commercial box joint jig or a self made one?

Shop made, and with the weather constantly changing, thing needs tuning every time I require it. Can be a PITA, but it works for me!

  • Author

   It's amazing how much life interferes with pleasure!   Managed to get a few drawer fronts box jointed, also still waiting for some more wood to come out of the kiln, should be ready this coming week.  I guess then I'll be starting on stopped dados and drawer bottoms. That's the second dry fit so far  several more to come.

post-15288-0-17424200-1412247615_thumb.j

post-15288-0-17576100-1412247676_thumb.j

Watch dat boy dry fittin'.....he gonna have heself a dresser in jus' a lit-til bit.

  • Author

Watch dat boy dry fittin'.....he gonna have heself a dresser in jus' a lit-til bit.

   Tim... You South Carolina boys, sure do mumble funny!   Must be the shark!     Yup, dresser in my future!

  • 2 weeks later...

   Tim... You South Carolina boys, sure do mumble funny!   Must be the shark!     Yup, dresser in my future!

Bubba, my mouth's always full of something.  I'll die old but never hungry!  Have you started thinking about the finish yet?

  • Author

Bubba, my mouth's always full of something.  I'll die old but never hungry!  Have you started thinking about the finish yet?

   The finish... Yeah, well it's gotta match the rest of the bedroom, so I'll do the same... golden pecan stain, a couple coats of Danish Oil, then several coats of matte poly.  It will get a lot of use so I need to protect it, especially the top and the drawer fronts!

  • Author

Well, somehow I got delayed in working on this dresser, Dad blamed family, they just keep interfering with things that are less important than them!  Anyhow, I got a little time in the shop this weekend, and got all the dresser drawers cut and dry fitted, without the bottoms, but first I had something that had to be done first.   Do you know what these are?post-15288-0-68400500-1413752071_thumb.jpost-15288-0-40846100-1413752093_thumb.j

  I don't know if you see what I see, But I see 40 stopped dados, to fit the bottoms in!   The problem as I see it is, My router is 1 1/2 hp and I'm going to have to remove 1/16th per pass to get to a 3/8th depth.... 6 passes per board times 40 boards equals a lot of work.    Got it done, now just squaring up the dado ends and making the bottoms, dry fitting, breaking it all down for the 6th time and sand for a day or two.   I'm getting old just thinking about it, Wait, I'm already old, so maybe with a little luck I'll get halfheimers and won't remember how much work I already have in this project, and what it's actually for.

post-15288-0-68400500-1413752071_thumb.j

post-15288-0-40846100-1413752093_thumb.j

You've got a real production line going there Richard. Put a larger router on your Christmas wish list and maybe you will be able to do them dados in 1/4" bites.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.