Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

My Proposed Shop Layout

Featured Replies

Tablesaw is 30% done and will finish tomorrow and start makin' somethin'

I believe you have the same saw and accessories I have. You'll have a few bolts and nuts left over when installing the fence and rails which is normal. They are used if you have the contractor saw. I called SawStop and they verified this.

  • Replies 91
  • Views 18.9k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Hi All...The electrician will be out on Friday to give me an estimate on bringing in a sub panel and putting in several 240 outlets.  I added all of my current and proposed equipment and came up with

  • chefmagnus@grics.net
    chefmagnus@grics.net

    Restaurant supply stores have the cheapest anti-fatigue mats. I am what every Ranger dreams about. I am a old Ranger. Too many jumps trashed my knees. I need mats and kneeling pads.  

  • ResidentEvil
    ResidentEvil

    I'm not the one to answer the questions unfortunately.  The two shops I've worked out of have been garage and stand alone.     IMO the return air vent would be the biggest concern with the french do

Posted Images

  • Author

Tablesaw was a challenge with getting the wings on and had some non woodworker related responsibilities that intruded :)  So no I did not "get er done" but sawdust will be made today...

Horse stall mats are not as cushy but they are cheap and big. I got mine at Tractor Supply. Pretty heavy and the rubber smell lingers for a couple of weeks. They stay where you put them and very non slip surface.

Horse stall mats are intended to protect their hooves from concrete floors.

  • Author

Tablesaw done

 

NFU6QHxl.jpg

 

Sawdust mission fullfilled...

 

YfnMAH9l.jpg

 

I also now have a better appreciation of a drill press...  Those holes are not perpendicular...even though I tried to keep the drill correctly oriented it's harder than it looked :)  May have to just pick up a benchtop unit if nothing else. 

 

If you're guessing they will be beer totes... complete with opener and bottle catch... Thanks again Tom for the great suggestion...

 

zEAcpd7l.jpg

  • Author

Haven't used it yet...other than a test cut... For that it was smooth as silk...

  • Author

Well truth be told I was pretty upset day before yesterday when I took the paper of the cast iron top.  When we were unloading the saw we tilted it over and it did a bit of a rub on the concrete.  Totally my fault... It's only cosmetic but I have to be honest it really bummed me out when I saw it...Kind of like that feeling you get with the first ding on a new car.

 

tFr9nMal.jpg

AWESOME! Glad to see some saw dust. Can't wait to see the finished product. I spent almost all weekend in the shop. With the exception of picking up some sycamore at woodcraft today. 

Trick for drilling perpendicular holes with a hand-held drill: position the piece so that you are drilling horizontally at around chest or waist height.  Looking down from above, you can tell whether the drill is off left or right.  Put a ring (finger jewelry) on the shank of the drill.  If you tip the drill up or down, the ring will slide forward or backward. 

 

But a drill press is on my wish list, too.

  • Author

Trick for drilling perpendicular holes with a hand-held drill: position the piece so that you are drilling horizontally at around chest or waist height.  Looking down from above, you can tell whether the drill is off left or right.  Put a ring (finger jewelry) on the shank of the drill.  If you tip the drill up or down, the ring will slide forward or backward. 

 

But a drill press is on my wish list, too.

What a clever idea... thanks Mr. Chips...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.