Recommended Posts

Posted

This might be an outrageous thought, but has anyone ever hired someone to calibrate their jointer for them? I just picked up a used DJ-20, and I really have no way of truly dialing in the beds to be coplanar and parallel. At the very least, it seems I would need to purchase a high quality straight edge and feeler gauges. Couple that $100 bill with the fact that I really have zero expertise at this, and I am really questioning if it wouldn't be better to hire a machinist/skilled woodworker to true up the beds/fence and throw in the new knives I have. Seems like this is something that is kind of "one and done", so I don't see it as a waste of money to pay someone to do it. From here on out I can probably set knives when they need replaced, but I want this machine to operate at 100%, and I don't know if I can get it to 100% on my own.

 

Patrick

Posted

Getting some help to set it up the first time would help you learn how. If you want to be precise your gonna need the straightedge eventually. Is there a local woodworking club/group where you might find someone to help?

Posted

==>don't need any fancy tools or expensive gizmos to set your jointer

+1

 

==>The tables can easily be set with test cuts.

Assuming you’ve got the experience to interpret the results... We mere mortals need at least a straight edge and a feeler gauge or two... :)

 

There are dozens (maybe hundreds) of videos demonstrating the process... There are probably many hundreds more magazine articles… I believe Marc has a video setting-up a PM jointer – think it’s called Jointers are Jumping or something like that…

 

You need long straight edge (the longer the better), a set of feeler gauges and a good 12” straight edge (usually the blade from a combo square)… Things like dial gauges do more harm than good… Find a video/article on setting outfeed table height using a 12” combo square blade and the arc of the cutterhead – that’s the traditional method and still the best… It leaves the outfeed table approximately one thou below the cutting arc…

Posted

Whelp, I think I am in luck. I put up an ad on CL for a machinist/skilled woodworker to see if anyone would respond. Somehow I ended up with a union cabinet maker who teaches at the union apprenticeship cabinet school. Craigslist is strange as hell, but I really love it at times. Im actually waiting for PB's doppelganger to show up, because he also  mentioned "you don't need a straight edge". I will be practicing my "shut up and listen" routine all Friday evening.

  • Like 2
Posted

==>A piece of mdf or melamine is straight edge enough. :) Paper and a flashlight is feeler gauge enough.

Yea, yea... I know... But the straight edge/fg method is excellent for those climbing the learning curve... Boggs made his first ladder-backs with a sharpened screwdriver -- the rest of us benefit from a spokeshave or two :)

 

==>you don't need a straight edge

As PB correctly points-out, you arn't required to have a straight edge... But some kit makes the process straight-forward for those with less experience... The straight edge method is simple, robust, well documented and least prone to end-user-error… The no-kit technique assumes the end-user is familiar with jointer setup, competent in milling stock and capable of translating milling results into adjustments – not always the case…

Posted

==>A piece of mdf or melamine is straight edge enough. :) Paper and a flashlight is feeler gauge enough.

Yea, yea... I know... But the straight edge/fg method is excellent for those climbing the learning curve... Boggs made is first ladder-backs with a sharpened screwdriver -- the rest of us benefit from a spokeshave or two :)

 

==>you don't need a straight edge

As PB correctly points-out, you don't... But some kit makes the process straight-forward for those with less experience... The straight edge method is simple, robust, well documented and least prone to end-user-error… The no-kit technique assumes the end-user is familiar with jointer setup, competent in milling stock and capable of translating milling results into adjustments – not always the case…

I assure you, I am not competent enough to translate milling results. I know I am getting a slight wedge effect right now, and I know the knives probably need replaced. Other than that, all I know is that I needed to search for external help ; )

 

llama, marc has a video on parallelogram jointer calibration and knife setting. A few youtube videos on table saw calibration. I think marc also has one, but its catered to cabinet saws. For contractor saws, its worth checking out the PALs guy who has a youtube video. Cant comment on planer adjustments. I have the dw735 and you just swap out the knives.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   0 Members, 0 Anonymous, 47 Guests (See full list)

    • There are no registered users currently online
  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined