Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

SHOULD I STAIN OR DYE THIS TEAK?

Featured Replies

Hello everyone! I'd like to achieve a nice ebony finish on my antique teak (Aunt Teak?) dining table but I want to make sure that the beautiful grain is NOT obscured. Should I use an ebony stain or ebony dye?

post-17808-0-87481800-1430498422_thumb.j

  • Author

Maybe it is walnut. The table is about 70 years old and I have a torn piece of paperwork from the original purchase (the table was my parents') and the word "teak" is hand written on the receipt,

 

So, Eric and TIODS - could you please elaborate on your answers? I'm a newbie and I don't want to screw this up. The original finish on the table was very dark (like ebony) and I want to recapture the original look.

Then don't dye it.  Why would you ruin that beautiful wood by slathering black all over it?

  • Author

I'm totally confused. I've been doing some online research and people seem to say that stain tends to hide the grain while dye will enhance the grain. I need help!

We're giving you a hard time man...we're saying don't stain it, don't dye it, don't do anything to it and leave the wood looking like wood.

 

If you're dead set on making that table black, try out a couple things on an inconspicuous area and see what you like best.

I think you will find on woodworking forums that the general populace is against stains and dyes in general.  I'm all for a simple finish, skip the stains and dyes. 

I'm totally confused. I've been doing some online research and people seem to say that stain tends to hide the grain while dye will enhance the grain. I need help!

 

kind of... dye will show more grain than stain.  In some cases, dye will highlight figure (but not necessarily grain, which are two different things).  

 

I agree with the crowd, just be a clear finish on it and call it a day.  could be teak, it has similar grain to walnut.  

If you want to see what a natural finish will look like you can wipe it with some mineral spirits.  I think you'll find that it is nice and beautiful without any added colors.  An oil finish may add a little yellow tint, whereas a shellac could add some other hues depending on color.  These would be more subtle than stain or dye. 

  • Author

Eric was right! I took one of the leaves into a restoration guy - he took one look and said "walnut"

 

I agree that a natural finish would look beautiful - I'm just sentimentally attached to the original look of the piece.

Then use  Watco Danish oil with the walnut tint, that will darken it somewhat, but you still get to enjoy the wood... Let it dry for a week, then finish it with a matte poly, several coats!

  • Author

Okay. I've decided to go with the natural finish. RichardA suggests Watco Danish Oil with a walnut tint followed by polyurethane top coats. Are there any other options for a natural finish? Could I go straight to polyurethane? Or should the wood be pretreated with something (a sealer?) before the top coats go on?

You can skip the Watco and go straight to poly. Wipe it down with mineral spirits and that's about what it will look like. If you use several coats you will get some additional amber tints from the poly, brush on or wipe on like ARS.

  • Author

Thanks wdwerker! What about using boiled linseed oil and then polyurethane? Is there any advantage to that? BTW - what is ARS?

ARS = Arm-R-Seal.  It's a wipe-on urethane made by General Finishes and fairly universally loved for its ease of application, durability and final look on most woods.

 

You may gain just a bit of additional richness starting with BLO...but you'll also gain a much longer finishing time.  BLO takes forever to dry, and you'll need to give at least a week before you can start top-coating.  But there is nothing like BLO to bring out the warmth and richness of walnut.  ARS by itself does a pretty good job, but I think BLO adds a bit more depth.  I usually skip it though.  I think Rich's walnut Watco idea would be better than BLO for a first coat if you're in a hurry...it'll dry a little faster than straight oil and you'll start building a film on top of it right away.

The walnut Watco will dry faster than BLO and add a little color to the wood without hiding the grain. Plus one coat should dry in a day or 2, 3 days tops. BLO might take a week or even more to dry.

But straight to poly is quite safe for what you are doing.

  • Author

Thanks, Eric! I'm not in a rush. I want the best result I can achieve. So I'm thinking BLO... wait a week... then start top coating with a satin polyurethane. Does that sound good?

Yep, I think you'll be pleased with that.

 

One word of caution though...walnut is an open-pored wood and there's no need to drown it in the linseed oil.  Apply just enough to quench its thirst and wipe back any excess right away.  Otherwise the oil will weep out of the pores for days and they'll dry into little gummy boogers all over the surface...and that's no good.

If you can wipe a clean cotton rag over the surface and pick up no oil or stickiness a couple days in a row you should be good to start w thin coats of poly.

  • Author

A few more questions:  

Do I apply more than one coat of BLO?
If so, how many?  
Should I sand between coats?
If only one coat of BLO, should I sand before applying the topcoat?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.