Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How would you repair this?

Featured Replies

I had a template slip (thought the tape was still sticky enough to reuse) while I was template routing a small curve on the bottom of the side of a utilitarian (but nice I hope) bookcase I am making. It is poplar and will be painted.

Cheers,

Brian

e086734fdfe17ccd099745d9f33630ff.jpg

Sent from my iPhone using Tapatalk

Ouch!

 

Remake would be my first option.

 

It is a painted piece so, you could block up the end and bottom and fill with epoxy.

Ouch!

Remake would be my first option.

It is a painted piece so, you could block up the end and bottom and fill with epoxy.

Yup - I did this on a recent paint grade project. Fill it with west systems and then re-route it.

Assuming that you don't want to make that piece shorter and don't want to remake it... I would use a litte piece of poplar to fill that spot. If the fit is poor then thickened epoxy would fill the gaps. I would use wood flour for the thickening.

You could also skip the poplar and just make a putty of wood flour and epoxy.

Assuming that you don't want to make that piece shorter and don't want to remake it... I would use a litte piece of poplar to fill that spot.

+1 This is what I would do. Cut it square with a jigsaw to make the patch piece easier to fit and glue in a piece of poplar then re-route that little area where the new piece was added.

-Jim

Since it is going to be painted I would just cut out the affected area with a forsner bit and glue in a dowel. Flush cut and sand, seal the end grain of the dowel with a little extra paint and be done.

I would change the design of the bottom, use french curves or something, make a hooking type point?

 

-Ace- 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.