jmaichel Posted June 24, 2015 Report Posted June 24, 2015 It has been months since I have built anything. My wife and I had our second child early this year and then a couple months later I went to Florida for a month and then moved to Hawaii. We finally got settled in and I was able to setup a small shop area in part of our garage. Some of you know that I ditched all my power tools prior to the move so really all I have left are hand tools, joinery bench and sharpening area. I wanted to build something to get me in shop and woodworking again. I built a simple six board sawbench based off of one featured in Semester one of the Hand Tool School. I had built a similar bench back in 2011 and then experimented with a couple other benches along the way. I quickly found out that I hate the designs that feature splayed legs, they always seem to get in the way. The bench is built out simple (overpriced) big box lumber. This was more of an exercise in sawing then anything else but it got me back in the shop and I got to try out my NOS Sandvik handsaw. Quote
wtnhighlander Posted June 24, 2015 Report Posted June 24, 2015 Nice job, James. Do you make any sort of relief hole at the point of the leg notch to reduce splitting? 1 Quote
Jim DaddyO Posted June 24, 2015 Report Posted June 24, 2015 I love my saw benches and work from them all the time since I built them. You have done yourself a big favour and did a nice job of it too! Congrats! Quote
G S Haydon Posted June 24, 2015 Report Posted June 24, 2015 Nice bench and saw James. Good to hear you got some shop time! Quote
jmaichel Posted June 25, 2015 Author Report Posted June 25, 2015 Nice job, James. Do you make any sort of relief hole at the point of the leg notch to reduce splitting? Thanks! I did not, I am really not that concerned about splitting. Quote
jmaichel Posted June 25, 2015 Author Report Posted June 25, 2015 Thanks for the comments. It was nice to build something even if it was only a sawbench. Not sure what is next. I was going to build a simple Nicholson Workbench but the cost of Homecenter lumber is outrageous and wetter than...(use your imaginations). Not sure what is next but I have a safety orientation at the woodshop on the AF base this Saturday. I took a tour of it last week and it is way nicer than I expected. They have 2 full Sawstop Cabinet Saws, a huge General 5HP bandsaw, a few other smaller bandsaws, several lathes, everything you could imagine in a pretty big space. I look forward to using their shop whenever I can break away from the family. Quote
SteveM Posted June 25, 2015 Report Posted June 25, 2015 The cost of doug fir shouldn't be too bad, but I share your pain with how sopping wet our construction lumber is. I find a 2x12 will lose about 1/2" in width as it dries and need a coat of paint on the end of the board or it will split, not to mention the 6-12 months needed to air dry. I didn't care for all of the knots in the lumber that I could find so I bought 8/4 poplar for the top of my bench. You could also look for alder or big leaf maple as they tend to be pretty cheap around here. Quote
Brendon_t Posted June 25, 2015 Report Posted June 25, 2015 Thanks for the comments. It was nice to build something even if it was only a sawbench. Not sure what is next. I was going to build a simple Nicholson Workbench but the cost of Homecenter lumber is outrageous and wetter than...(use your imaginations). Not sure what is next but I have a safety orientation at the woodshop on the AF base this Saturday. I took a tour of it last week and it is way nicer than I expected. They have 2 full Sawstop Cabinet Saws, a huge General 5HP bandsaw, a few other smaller bandsaws, several lathes, everything you could imagine in a pretty big space. I look forward to using their shop whenever I can break away from the family. Hidden gems, I'm telling you. A lot of larger military bases have AMAZING wood shops. The shop on camp pendleton is amazing. At $3/day to use, I was in there all the time Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.