Tom Cancelleri Posted July 7, 2015 Report Posted July 7, 2015 1/2" shank pattern bits are always the preferred shank. 1/4" I find is really only good for smaller routers. I'm not really comfortable chucking up a 1/4" bit in a 2.25 or larger HP router, I find 1/4" bits chatter a bit when using pattern bits. I was looking around for a big beefy pattern bit for doing larger things maybe 8/4, and I know a smaller bit isn't gonna cut it for some bigger templates. I stumbled across this bit, and it's gigantic! The name fits it rather well. Does anyone have any experience with it? Yay? Nay? http://shop.wnwoodworkingschool.com/Big-Daddy-Pattern-Bit-Big-Daddy-Pattern-Bit.htm Quote
Eric. Posted July 7, 2015 Report Posted July 7, 2015 Big Daddy. Marc has one. I'm sure it's killer. See if you can get a deal on two and I'll go in on it with ya. 1 Quote
Brendon_t Posted July 7, 2015 Report Posted July 7, 2015 Marc talked about this bit in one of the videos I watched recently. Looks like a beast Quote
Tom King Posted July 7, 2015 Report Posted July 7, 2015 How many feet can it run before it needs sharpening, and do they take it back for sharpening? I haven't bought a non-carbide router bit since the 1960's. I do like cobalt drill bits for some things in metal, but have zero experience with it cutting wood. Quote
Keggers Posted July 7, 2015 Report Posted July 7, 2015 I have one and really like it. It does a great job. It's the most expensive bit I own. Quote
Vyrolan Posted July 7, 2015 Report Posted July 7, 2015 Big Daddy has more cutter length and more diameter....presumably advantage in some situations. I would take the Whiteside combo though...I wonder if the Whiteside one can leave better surfaces with the compression spiral versus the mill-like Big Daddy. How does Big Daddy's cobalt compare to the solid carbide? Quote
Trip Posted July 7, 2015 Report Posted July 7, 2015 BD is my go-to pattern bit... Don't remember if it's HSS or cobalt --- but in either case, way sharper than carbide. Quote
Vyrolan Posted July 7, 2015 Report Posted July 7, 2015 Whiteside makes the big daddy for Ng ! They released those "ultimate" bits well after Big Daddy started... I wonder why if BD is better. Margin may not be as good on the larger (and cheaper) BD. Quote
wdwerker Posted July 7, 2015 Report Posted July 7, 2015 They only make it for him. You have to order it thru Ng. Looks to be back ordered now. Quote
Gary Posted July 7, 2015 Report Posted July 7, 2015 I have one of these but have not had the chance to use it yet. Hope that will change very soon. Sent from my iPhone using Tapatalk Quote
CessnaPilotBarry Posted July 8, 2015 Report Posted July 8, 2015 Big pattern bits are nice when they'll fit the job. They disappate heat well, and the larger diameter leaves a smoother surface, especially with a spiral cut. The spiral virtually eliminates tearout and reversing grain issues. That particular bit should last a very long time, if properly cared for. Keep it clean, away from other bits, don't drop it, etc... Quote
bushwacked Posted July 8, 2015 Report Posted July 8, 2015 Such a beast!! Maybe one day I will have a reason for this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.