Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How to finish this poplar hamper?

Featured Replies

For my first woodworking project, I wanted to build something for the house. I chose a 1/2 size hamper inspired by Marc's.

Given that I'm just getting started, I chose poplar as it's cheap, and I expected to make several mistakes before it was over with. 

Now that it's assembled, I'm stuck on how to finish it. I realize poplar isn't great for staining, but painting this after all the work I've done feels like a bit of a letdown. 

Any suggestions? 

Thanks!

IMG_8195.thumb.JPG.15cadf49fcc0ccccd77ed

Seems like a good opportunity to practice finishing.  I'd put a thinned coat of dewaxed shellac on it and then a self-mixed wiping varnish staring off heavy on oil and ending heavy on varnish.  Could dye it first if you wanted it a bit darker.

 

Congrats on your project though.  It looks good.  And welcome to the forum.

  • Author
1 minute ago, BobInAustin said:

Seems like a good opportunity to practice finishing.  I'd put a thinned coat of dewaxed shellac on it and then a self-mixed wiping varnish staring off heavy on oil and ending heavy on varnish.  Could dye it first if you wanted it a bit darker.

 

Congrats on your project though.  It looks good.  And welcome to the forum.

Thanks for the suggestion! Do I need to precondition the wood prior to any of this? I've got General Finishes pre-conditioner here that I've planned on using if needed to prevent blotching. 

  • Popular Post

The only thing I know for sure is I'd be spraying.  Wiping/brushing that piece will surely be a disaster.

22 minutes ago, Eric. said:

The only thing I know for sure is I'd be spraying.  Wiping/brushing that piece will surely be a disaster.

He's not wrong about that. :)

I'd definitely be spraying that as well, even if you had to use rattle cans.  Just go with light coats and scuff with something like steel wool between coats.  If you're using a water based spray, I wouldn't use steel wool. 

1 hour ago, Eric. said:

The only thing I know for sure is I'd be spraying.  Wiping/brushing that piece will surely be a disaster.

Do you say this because of the design and joinery used on the piece or because it's poplar? I thought Marc had finished his with wipe-on...not sure though.

Dye sprayed on in light coats would do pretty well on poplar. Spray the finish too, wiping basket weave is going to get all kinds of runs,drips etc.

  • Author

Thanks for all the feedback... I've got a Wagner 870 I used for painting a few rooms... If I didn't use shaker cans, would that work? Or do I need a more proper HVLP system? 

in my experience, any system designed to paint a house (i.e. spray latex paint) are hard to adapt to the fine spray needed for furniture and cabinet finishing. I assume its possible because I see the guy doing it in the TV commercial, but I have never been able to get one of those guns to paint anything small without runs.

I second the opinion of buying rattle cans. If you go to Lowes or Home Depot, there are several different options of Minwax brand spray polyurethanes and lacquers. One of those would be my choice

  • Author
31 minutes ago, Andy Wright said:

in my experience, any system designed to paint a house (i.e. spray latex paint) are hard to adapt to the fine spray needed for furniture and cabinet finishing. I assume its possible because I see the guy doing it in the TV commercial, but I have never been able to get one of those guns to paint anything small without runs.

I second the opinion of buying rattle cans. If you go to Lowes or Home Depot, there are several different options of Minwax brand spray polyurethanes and lacquers. One of those would be my choice

Good to know - I bought a few rattle cans tonight at Lowes and will give them a try on a few scraps. Thanks!

If you go with some dye, you can use a spray bottle to,spray the dye if you don't have a help.  On the other hand, it's almost Christmas and Earlax and Fuji have some value priced spray kits..

  • Author
2 hours ago, Barron said:

If you go with some dye, you can use a spray bottle to,spray the dye if you don't have a help.  On the other hand, it's almost Christmas and Earlax and Fuji have some value priced spray kits..

The Fuji Mini-Mite 3 is calling my name! 

If you can swing it, get the 4-stage... 2/3 stage are basically the same, but there's a big jump in PSI/CFM in the jump to 4/5-stage... Far more long-term flexibility as WB finishes take over...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.