socoj2 Posted February 26, 2016 Report Posted February 26, 2016 Ive been shopping for a Jointer 8" used jointers are RARE in the south east this is about a 3 hour drive for me. Its in pretty good shape. Do i just get this for $800 or the Grizzly G0490W which would be $1200 all said and done. Mainly i want to save the $400 so i can immediatly order the Shelix and a new set of bearings for it. your opinions are always welcome. Thanks Quote
Brendon_t Posted February 26, 2016 Report Posted February 26, 2016 Bearings are~$12. I know nothing about the shop fox. Good luck either way. Quote
Chet Posted February 26, 2016 Report Posted February 26, 2016 I just looked at both on the net and they look to be identical machines other then paint jobs and the shape of the Shopfox base. So if it was me I would by the new Griz with the warranty. Save for the shelix while you wear out the factory blades. Quote
mat60 Posted February 26, 2016 Report Posted February 26, 2016 I have the shop fox and I dont want to hurt any fealings but get the griz. Quote
Gixxerjoe04 Posted February 27, 2016 Report Posted February 27, 2016 Dumb question, is there a link posted? Can't see it if so, couldn't see pics someone posted earlier either i don't think, not sure what the deal is. Anyways, i have the G0490 model with a byrd head, got it used, don't really have any complaints I can think of at the moment. Quote
shaneymack Posted February 27, 2016 Report Posted February 27, 2016 Dumb question, is there a link posted? Can't see it if so, couldn't see pics someone posted earlier either i don't think, not sure what the deal is. Anyways, i have the G0490 model with a byrd head, got it used, don't really have any complaints I can think of at the moment. I cant see any links either joe. Are you using tapatalk? Sent from my SM-N910W8 using Tapatalk Quote
Gixxerjoe04 Posted February 27, 2016 Report Posted February 27, 2016 Just now, shaneymack said: I cant see any links either joe. Are you using tapatalk? Sent from my SM-N910W8 using Tapatalk Nope, on my computer. Quote
Brendon_t Posted February 27, 2016 Report Posted February 27, 2016 Nothing was linked. Just models questioned. Quote
wdwerker Posted February 27, 2016 Report Posted February 27, 2016 I am pretty sure the quality control, fit and finish on the Shop Fox machines is a lower grade than Grizzley which is lower than Jet and much lower than Powermatic. How ever there is a good possibility they may all share the same rough castings. Motors, switches, bearings, accessories and quality of the machined surfaces can vary wildly between the brands. Quote
socoj2 Posted February 27, 2016 Author Report Posted February 27, 2016 k im going to order the Griz then. Quote
wareaglewoodworker Posted February 27, 2016 Report Posted February 27, 2016 I've been eying the G0490W and G0490XW myself. Not sure if it's a factor but it looks like they're on back order right now. Sent from my iPad using Tapatalk Quote
toddclippinger Posted February 29, 2016 Report Posted February 29, 2016 I have a few ShopFox machines and I would not buy another one. A large part of the problem is getting replacement parts. If you need a part for a Grizzly machine, you can look it up on the parts list and order it from Grizzly and have it on the way. If you have an issue with ShopFox, you have to find a ShopFox distributor and order from them. Fortunately, I have been able to determine the part from the Grizzly version and order from them to replace worn parts on the ShopFox. I would push for the Grizzly. ...oh and the Shelix cutter head is nearly a life changing event in the shop... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.