Recommended Posts

Posted

I guess I'm finally a real wood-worker... My table saw blade got dull.  

I've got a Freud LU83R010.  Does it make sense to have it re-sharpened?  It's a 10" 50 tooth blade. Forrest will sharpen it for $24.50 plus S&H, and a new blade costs $50 on Amazon.

I guess I should find a less expensive service, and / or wait until I have a bunch of blades that need sharpening.

Posted

Find local if you can, i have this super talented guy operating out of what most would call a "run down shed that is about to fall over" but man, $10 sharpening for blades, $6 bits, custom profiles etc. (as long as you can draw it, no auto cad for this old school maniac)

 

Posted

It's worth it, but I would try Dynamic Saw in Buffalo, or Scott Whiting in Glendale, AZ.  Both offer outstanding service and better rates.  Forrest is good, but is usually the most expensive option.  Sending in multiples makes shipping a better value.

Posted

Give the local guy an older but serviceable blade to sharpen as a test run. 

I have found that cleaning blades often greatly reduces the need for  sharpening.  I clean my blades at the first sign of resin building up on the teeth. I just use the commercially available blade cleaners, gloves and a stiff plastic brush. sometimes a scrap of Scotch brite pad for a stubborn spot.

  • Like 2
Posted

I live in a very rural area and there are a couple places around here that sharpen saw blades quite well mind you. Ask around at some of the places you buy saw blades for sharpening services and they might know.

I just sent a blade off and i couldn't justify the cost of forrest's sharpening service either. Went through a local place that ships them off to a facility, they don't charge shipping that way so it's much cheaper.

Posted
3 hours ago, Beechwood Chip said:

There's a guy my friend uses to sharpen kitchen knives, lawn mower blades, etc.  Do you think I should give him a try, or should I stick with someone who specializes in woodworking stuff?

Top sharpeners and blade manufacturers use some pretty sophisticated and expensive computerized machinery to sharpen blades to state of the art specs.  Odds are good that the local guy who sharpens mower blades doesn't have anything close. That doesn't mean he won't do a good job, but I'm pretty fussy, so there's no way I'm risking my expensive saw blades for him to experiment with. I'd go with a well proven performer who has a stellar track record.  

Cleaning should be a regular occurrence for your blades.  

 

  • Like 1
Posted

Call any local cabinet shop. There are so many providing pre-fab and RV units here that I have a local premium quality service that even understands proper brazing technique per manufacturer. It might be worth an appointment and an hour drive if you can find a place like that in the next town over. 

Posted

Forrest's sharpening service is really good.  I don't know how much money you will save by going local.   I had 3 blades sharpened from them last year, one needed small repair.   Here are my costs:

They will send you a $5 off coupon for next time around.  

Is it worth it to sharpen that Freud blade?  Probably, at least to keep around as a back up.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 76 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined