Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Walnut log bummer

Featured Replies

A buddy got his hands on a short walnut log that measured 13" across and about 6' long. There was no visible rot so I accepted it when he offered it to me. I don't have a lathe yet but figured I would cut it up into 10" sections for bowls once I do get one. I took the chainsaw to it and cut two sections down and was quite displeased to Find a few termite burrows and one live wriggler right where the heartwood and sap wood meet.  Are these even worth keeping and treating with something?  Any way to kill em all off and salvage? 

Some kiln drying will take care of the critters..  As for the damage, being you want to do bowls, might be a feature rather than a flaw.  Would be up to the recipient of the bowl.

If it was old damage then I would keep the logs and use the flaws as features. I think those come out nicely in bowls. But since you saw a live little bug friend in there then I'd suggest getting those logs the hell away from your shop asap. Sucks to toss walnut but its just not worth the risk for a few bowl blanks in my opinion.

I have a friend that turns and he likes the wood to be on the wetter side. Would it be best to slice them when you get the lathe rather than now?

The bugs will only be in the sapwood. If test it with Boracare or Tim-bor then bag it up till you get a lathe. K Cooper is right, better to have it green than dried out and cracked got turning.

Sent from my SCH-I545 using Tapatalk

Them termites love eating our California homes.  I don't know what I would do with the log but what ever it was  I wouldn't continue doing it any were near my house.

Sometimes I just hate spell check on my phone.

What I was trying to say is that the bugs only invade/eat the sapwood. You will find that they stop at the heartwood. With a walnut log that size, you will probably have enough heartwood to turn some nice bowls, etc. but if you like the rugged natural look the portion of the sapwood with defects often make a nice statement.

Tim-bor or BoraCare are products that are used to treat wood with any wood boring insect. I've had wood infected with termites, powder post beetle and other boring insects that I've treated with these products and then bagged them up in a black plastic bag to prevent contamination of other woods and to ensure a complete kill, then used the wood to turn bowls.

Dry walnut is more difficult to turn and will often have cracks/checks that are difficult to eliminate. Drying walnut logs incorrectly can cause checking.Turning it green or not completely dry is easier and you are more likely to get a finished product without cracks.

Good luck

2 hours ago, drdabrown said:

I've had wood infected with termites, powder post beetle and other boring insects that I've treated with these products

Am I correct in my thinking that you would only use these bowls decoratively?  My understanding is that BoraCare stays in the wood permanently so you wouldn't want to us it on anything that may end up on the dinning room table ie. Salad bowls ,fruit bowls.

Fyi, BoraCare only stays in the wood permanently if you seal it in with varnish within a certain amount of time...its concentration will fade with time like any other bug killer if you don't seal it right away.

  • Author

Good info guys thanks.  Looks like I have my answer.  I wouldn't be turning these blanks any time soon and have no desire to keep them on hand with crawley friends in it. 

Sounds like the fire pit will get fed.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.