Paul Edgar Posted April 25, 2016 Report Posted April 25, 2016 The exhaust port adaptor is not very robust. I have an angle adaptor so that the hose stays away from the board exiting the planer. The weight of the 4' hose was too much for the plastic, see photo. I rigged a support and will probably get a replacement exhaust port, but before I do, I was interested in hearing from others who have this model to see what they do. Quote
Beechwood Chip Posted April 25, 2016 Report Posted April 25, 2016 Your DeWalt 735 exhaust port doesn't look like my DeWalt 735 exhaust port. Quote
Popular Post Llama Posted April 25, 2016 Popular Post Report Posted April 25, 2016 A guy shouldn't be going around comparing exhaust ports... 3 Quote
RichardA Posted April 25, 2016 Report Posted April 25, 2016 The ejection port on the 735 really throws chips hard. That quick of a 90* turn will give you problems. Mine comes from above, and I stretch the flexible hose as straight as possible. The D/C does a good job, but with the ejection speed from the planer it will wear your 90* elbow out in a short time. I'd use 2 45* elbows with 6" to 12" between them! Quote
Paul Edgar Posted April 25, 2016 Author Report Posted April 25, 2016 2 hours ago, Beechwood Chip said: Your DeWalt 735 exhaust port doesn't look like my DeWalt 735 exhaust port. Beechwood, Remove the port and look at it from the tool side.... Quote
Tom Cancelleri Posted April 25, 2016 Report Posted April 25, 2016 I've seen people do a bunch of things. This was probably the easiest thing I've seen. 1 Quote
Cliff Posted April 26, 2016 Report Posted April 26, 2016 My snowblower handle is at the perfect height to prop the hose up as it comes out of the planer. I'm definitely wanting to do something a bit more clever though. I usually have it turned so it's kinda taking a 90 degree turn. Quote
Coop Posted April 26, 2016 Report Posted April 26, 2016 I bought this (bottom right adapter) from Rockler to fit over mine. The part that fits over the 735 fitting is flexible rubber and the part that my hose fits over is hard plastic that swivels. Quote
wtnhighlander Posted April 26, 2016 Report Posted April 26, 2016 Ever tried a pillowcase over the exhaust port? ? Quote
Coop Posted April 26, 2016 Report Posted April 26, 2016 34 minutes ago, wtnhighlander said: Ever tried a pillowcase over the exhaust port? ? Now that would have to be one big ass pillowcase, the size of a cotton picker's bag? Quote
Paul Edgar Posted April 26, 2016 Author Report Posted April 26, 2016 The problem is the part that connects to the planer fits into one fixed pin and one spring loaded pin. The plastic collar will not tolerate much stress before ending up as in the photo at the top. The port the fitting attaches to is a bastard size. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.