Recommended Posts

Posted (edited)

Does anyone else have this? I just purchased it, not many reviews out there on it. Would love some feed back, Thanks!

 JET JDP-15B

IMG_6841.JPG

Edited by Ryan Grondin
added model number
Posted

I have the floor standing model of that drill press. I love it still. I've had it quite a while now, I used it to do all the holes in my Roubo build as well as several other projects. I've drilled 1/4" steel, no problems. I did a write up of it here. 

 

 

  • Like 1
Posted

I also have the floor standing version and love it. I can only assume (dangerous) that is the same head unit. Certainly looks the same.

Sent from my SM-G930V using Tapatalk

  • Like 1
Posted

Thanks guys, Yes it's the same head unit as the floor model. Thing is a beast. I had a hell of a time getting it up onto the bench. The bench it's on is a tad too high for it. Going to have to build something lower. Thanks for the comments and the link to the review!

Posted
On August 4, 2016 at 0:10 PM, Ryan Grondin said:

Thanks guys, Yes it's the same head unit as the floor model. Thing is a beast. I had a hell of a time getting it up onto the bench. The bench it's on is a tad too high for it. Going to have to build something lower. Thanks for the comments and the link to the review!

Ryan.  , When you get a chance, would you please strike a measurement from the drill center point to the barrel that holds the table. I need to know how far from the edge of piece to be drilled can I drill a hole. Thanks, Steve

Posted
6 minutes ago, Rex Edgar said:

Ryan.  , When you get a chance, would you please strike a measurement from the drill center point to the barrel that holds the table. I need to know how far from the edge of piece to be drilled can I drill a hole. Thanks, Steve

7" and 5/8ths

  • Like 1
Posted
On August 4, 2016 at 10:09 AM, Tom Cancelleri said:

I have the floor standing model of that drill press. I love it still. I've had it quite a while now, I used it to do all the holes in my Roubo build as well as several other projects. I've drilled 1/4" steel, no problems. I did a write up of it here. 

 

 

Tom, I'm looking at the Jet drill presses. I see you have the standing model, in the advertising the base looks very narrow. Is the unit as top heavy as it looks. I'm not planning on securing it to the floor. Steve

1 minute ago, Ryan Grondin said:

7" and 5/8ths

Thank you sir and snappy too!

Posted
5 minutes ago, Rex Edgar said:

Tom, I'm looking at the Jet drill presses. I see you have the standing model, in the advertising the base looks very narrow. Is the unit as top heavy as it looks. I'm not planning on securing it to the floor. Steve

The base isn't really that narrow. It's well balanced. I haven't had any tip over scares. Mine isn't bolted to the floor either. I've contemplated building a bigger base and bolting it to that base just for peace of mind, and to incorporate that into a bunch of drawers to hold all my drill bits and such. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 44 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined