Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

where did is that at? just had it.

Featured Replies

  • Popular Post

My shop has gremlins, not the friendly one either, How many times you lay a tool down on the bench and go to grab it and poof it is gone?  I laid down a chisel and go to grab for it and it was not there, I tore up the shop looking for it, I go to my cabinet and pull out another one, when I get back to the bench there sits my chisel, now this is not the first time it happen, everything from a block plain, to scrapers, I know it's not me, God I hope it's not me. Today I was finishing up a set of powder horns for a friend, I picked up some nice brass powder charge nipples and installing them, after I got the hole drilled went to grab the nipples, took me over an hour to find my nipples, (I hear the snickering in the back ground) I had them in the box they came in and for the life of me could not find the box, I went to the house and asked my wife if she (again I here the snickering ) seen my nipples, You know that look your wife gives you when you ask a dumb question? she asked if I misplaced my nipples? and started to laugh,  well went back to the shop and there was the box sitting on my bench with my nipples.

You should attach something to your nipples so you don't lose them.  I hear chains are effective

True story. My daughter knew a guy who pierced his own nipple. Trouble was, he didn't go back far enough & the end of his nipple dried up & fell off.

So yes, he should have used the chains.

Texans in Houston 2/5/17! Yeah Baby! 

  • Author

thought you like might like to see my nipples

powder horns.jpg

the horns were in real rough shape when I got them, one is a cow horn and the other is a buffalo horn. this was my first attempt at carving and most likely my last as well, I have a friend that asked me make powder horns out of them, instead of using the typical plug for the end I decided to go with two different charging nipples. one has a brass plug the other is a spring loaded charging nipple where you can buy separate charging tubes, the way it works you pick the a tube like a 100 gr, attache it to the nipple and put one finger over the end of the tube and push in the slide, giving you the charge. 

12 hours ago, drzaius said:

True story. My daughter knew a guy who pierced his own nipple. Trouble was, he didn't go back far enough & the end of his nipple dried up & fell off.

So yes, he should have used the chains.

Sounds like Darwin's theory at work there!

  • Author
7 hours ago, wtnhighlander said:

Was the horn difficult to work?

no, once you get the outline engraved in just start scraping, once you break the outer shell it is pretty easy, remember the sharper the better,

7 hours ago, wdwerker said:

I remember an awful smell from sawing and sanding horn. Never carved any.

yea it kinda stays with you for a while eh?

Defiantly smells terrible.  I cut and shaped deer antler for knife scales and it was disguising 

  • Author

I use a dust mask with filter cartridges, if you put a small shop vac at point of cutting or sanding the smell will be pretty much eliminated.

 

9 hours ago, Brendon_t said:

Defiantly smells terrible.  I cut and shaped deer antler for knife scales and it was disguising 

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.