Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Beginners guide, tool guide? Practice projects?

Featured Replies

So I've been practicing wood working for quite a while. It's been mostly functional or construction carpentry. I have built a couple of furniture grade pieces, mainly a big media cabinet/desk. Came out exceptionally but if I'm honest I cheated. I had a guest cabinet maker.

 

My uncle and his best friend are ridiculously good. They used to be foremen in a production shop that built reception desks for like NY offices and conference tables. Most notably my uncle built most of mahogany closet cabinetry in the Mike Tyson house for the original owners, cool, but I'm getting off topic.

 

I need to reboot. I'm looking for good sources to see what tools I need. Practice projects, jigs and basic skills. The past 3 years I've spent renovating a house, getting married and making a baby. I'm realistically still like a year from sitting around and making jewelry boxes for grins and giggles. Still I'd like to start collecting the small stuff that you don't know about till you've been there. I'm not rich I can't just pop open the Rockler and Festol catalogs and go to town so I do a lot of Craigslisting and such.

 

 

 

 

Sent from my iPhone using Tapatalk

  • Popular Post

Buy Marc's book on hybrid woodworking. He's got a lot of good suggestions. 

2 minutes ago, prov163 said:

Buy Marc's book on hybrid woodworking. He's got a lot of good suggestions. 

This would be an excellent idea.  Read the book and decide what it is you think you might like to build.  Start with the basics.  Dust collector, jointer, planer, (you need these to make you lumber square and flat) table saw, some even skip the table saw and just invest in a nice band saw, you will always need clamps.  You can do a lot with this set up.  From here there is a lot of wisdom behind the thought of don't by any tool until you actually need it for a project. 

  • Popular Post

I'd skip the book and buy the Shaker Table video series from the Guild.  That would be a more specific (and IMO - useful) set of information, and it comes with a specific goal.  Watch the videos, figure out what you need to build that table, buy the tools, build the table.  Pick another project and repeat until you are shop full and replete with techniques.

What you buy will really be determined by what you want to build. My advice is do not "build a shop" instead set yourself a project and tool up to complete that project. Only buy tools when you have a need for them. If you don't have a need right now start a savings account and keep an eye on craigslist to see what tools go for in your area. Buying tools with the hope that one day you will have a complete shop and then and only then start making things is a good way to be that guy on craigslist who sells everything 10 years after buying it without ever using any of the tools.

Good advice from these guys. I'll just add that there's no need to go build a bunch of jigs imo. Just start a project and build jigs as you need them.

 

Sent from my SAMSUNG-SM-G890A using Tapatalk

 

 

Hot plates are good beginner projects. Table saw and router is what I use but you could use different tools depending on what you got. 

Bandsaw boxes are cool beginner projects too. Since they really don't have to obey the regular rules of wood movement, it's a very freeform and relaxing piece to make.

 

Invest in some high quality hand tools. It's easy to think power tools are where it's at, but when you need to fine tune something hand tools are much better suited to the task. Bench chisels, a block plane, and a smoothing plane are a good place to start. Veritas is premium, as is Lie Nielsen. You really do get what you pay for with hand tools. I also have a Wood River plane that works great.

 

Learn to sharpen your hand tools well. If you can't shave your wrist with it, it's not sharp enough yet. The duller the tool, the more likely it is to jerk out of your control and injure you.

 

I agree with the earlier suggestion of investing in a Wood Whisperer Guild project. They're top quality instruction.

  • Author
This would be an excellent idea.  Read the book and decide what it is you think you might like to build.  Start with the basics.  Dust collector, jointer, planer, (you need these to make you lumber square and flat) table saw, some even skip the table saw and just invest in a nice band saw, you will always need clamps.  You can do a lot with this set up.  From here there is a lot of wisdom behind the thought of don't by any tool until you actually need it for a project. 

 

I should add I have a lot of the big tools. Table saw, drill press. I have sanders, an old router that I'd like to upgrade and actually somehow l managed to be donated a planer and joiner. Really need a new jigsaw cause my axe cuts straighter.

 

The things I don't have is all the clamps saws hand planers chisels that I see you guys using a ton. I don't have skills making any carpentry joints. I don't know how things are supposed to be made. I know it's not all with a Kreg jig

 

 

 

 

Sent from my iPhone using Tapatalk

 

I should add I have a lot of the big tools. Table saw, drill press. I have sanders, an old router that I'd like to upgrade and actually somehow l managed to be donated a planer and joiner. Really need a new jigsaw cause my axe cuts straighter.

 

The things I don't have is all the clamps saws hand planers chisels that I see you guys using a ton. I don't have skills making any carpentry joints. I don't know how things are supposed to be made. I know it's not all with a Kreg jig

 

 

 

 

Sent from my iPhone using Tapatalk

Buy this and read it:

 

https://smile.amazon.com/gp/aw/d/0679766111/ref=mp_s_a_1_1?ie=UTF8&qid=1490063901&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=complete+manual+of+woodworking&dpPl=1&dpID=61xiECqamIL&ref=plSrch

 

Trust me. If you absorb even half of it, you'll be well on your way.

The Joint Book is also very good for getting started.

 

https://smile.amazon.com/gp/aw/d/0785822275/ref=pd_aw_sim_14_2?ie=UTF8&psc=1&refRID=7R8C2FRGF1PJYR5Z5QJG

  • Author

 

Will do thanks

 

 

Sent from my iPhone using Tapatalk

I'd skip the book and buy the Shaker Table video series from the Guild.  That would be a more specific (and IMO - useful) set of information, and it comes with a specific goal.  Watch the videos, figure out what you need to build that table, buy the tools, build the table.  Pick another project and repeat until you are shop full and replete with techniques.

 

 

I'm going to look into this as well

 

 

Sent from my iPhone using Tapatalk

Bandsaw boxes are cool beginner projects too. Since they really don't have to obey the regular rules of wood movement, it's a very freeform and relaxing piece to make.

 

Invest in some high quality hand tools. It's easy to think power tools are where it's at, but when you need to fine tune something hand tools are much better suited to the task. Bench chisels, a block plane, and a smoothing plane are a good place to start. Veritas is premium, as is Lie Nielsen. You really do get what you pay for with hand tools. I also have a Wood River plane that works great.

 

Learn to sharpen your hand tools well. If you can't shave your wrist with it, it's not sharp enough yet. The duller the tool, the more likely it is to jerk out of your control and injure you.

 

I agree with the earlier suggestion of investing in a Wood Whisperer Guild project. They're top quality instruction.

 

Funny you mention sharpening. My uncle and his friend have half the power tools you would expect. In fact you would laugh at Johns table saw with the built in jointer.

 

They both definitely have sharpening wheels and are always showing you "how sharp they got that chisel" lol.

 

 

Sent from my iPhone using Tapatalk

With hand tools or any tool that cuts trims, planes or chops......  Sharp is the most important thing in working wood. Dull tools will make you hate woodwork.   As far as clamps go, Harbor Freight has F style clamps that are inexpensive and work quite well, you'll need a lot of clamps as you grow into this hobby. 

  • Author
To qualify Richarda's statement, the HF clamps work ok up to the 12" length. After that, the bar is too thin to stand up to much clamping pressure.

 

I can't fault their wooden hand screws, though!

 

I was gonna head over there. I have a number of their quick clamps. Not for the professional but they squeeze wood. Pads slip. I think I have two of the 24" f clamps also. I wanted to grab a handful of the pipe clamps. I actually have two long pipes I pulled out of my heating system. Cheap and dirty.

 

I like the irwins, cool that they don't need threads. Anyone try them?

 

I was going to grab a pair of good f clamps when I need them from cheapo.

 

 

Sent from my iPhone using Tapatalk

I use the harbor frieght pipe clamps. Cheap and work great. Plus they have a lifetime warrantee for that famous HF quality. When I get less lazy or have more time on a Saturday morning I'll be swapping one out. That's not to knock on them I really do like the clamps actually and couldn't imagine an advantage with a more expensive pipe clamp brand.

On 3/21/2017 at 0:32 AM, Jer32383 said:

Not for the professional but they squeeze wood.

These comments always make me scratch my head.  If they're not good enough for a professional, then why are they good enough for you?  You don't need your joints to go together right because you don't get paid for your work?  Either a clamp works or it doesn't.

I have two sets of Irwin quick clamps and I flat out refuse to use one of them.  The XPs are great but the regular ones are a complete joke.  They offer almost zero clamping pressure and are hardly useful as an extra set of hands.  I find f-style clamps to be much more useful in woodworking.  You can get away with buying cheap ones in the smaller sizes but I would recommend spending the money to buy quality in the bigger sizes.  German-made Besseys are king in my shop.

  • Author
1 hour ago, Eric. said:
These comments always make me scratch my head.  If they're not good enough for a professional, then why are they good enough for you?  You don't need your joints to go together right because you don't get paid for your work?  Either a clamp works or it doesn't.

I have two sets of Irwin quick clamps and I flat out refuse to use one of them.  The XPs are great but the regular ones are a complete joke.  They offer almost zero clamping pressure and are hardly useful as an extra set of hands.  I find f-style clamps to be much more useful in woodworking.  You can get away with buying cheap ones in the smaller sizes but I would recommend spending the money to buy quality in the bigger sizes.  German-made Besseys are king in my shop.

 

Not for the professional because the pads tend to slip off, slowing down production. Not for the professional often doesn't mean that it doesn't do the job or do it well. It means there are tools that do it and do it with less effort, quicker and/or last longer. They have been fine for simple home reno tasks like clamping some mdf or two cabinets together. However I'm a big dude and I did squeeze one till it exploded.

 

 

Sent from my iPhone using Tapatalk

1 hour ago, Eric. said:

These comments always make me scratch my head.  If they're not good enough for a professional, then why are they good enough for you?

I can answer that one. Because depending what you're trying to do, oftentimes "good enough" is good enough. To draw an analogy from the computer world, I've done plenty of network admin stuff for others, working on high-end switches and equipment -- hard-core professional-grade stuff. What do I use at home? The same off-the-shelf stuff available to everyone else. I don't need the features, redundancy, or bulletproof capabilities that a business uses. If their network goes down, their doors close tomorrow. If my network goes down, I shrug and reboot.

I'm new to woodworking; I don't install flawless cabinetry for A-list clients. I'm learning. I'll buy the best quality that I can afford, but I also have to make do with lower-quality stuff on occasion. I may have to MacGuyver together a solution from time to time. I think I learn more from those situations, and improve my woodworking knowledge, than I would if I had an A-list shop.

tl;dr> Buy the best you can afford. But don't let that stop you from making sawdust.

1 minute ago, ClassAct said:

I can answer that one. Because depending what you're trying to do, oftentimes "good enough" is good enough. To draw an analogy from the computer world, I've done plenty of network admin stuff for others, working on high-end switches and equipment -- hard-core professional-grade stuff. What do I use at home? The same off-the-shelf stuff available to everyone else. I don't need the features, redundancy, or bulletproof capabilities that a business uses. If their network goes down, their doors close tomorrow. If my network goes down, I shrug and reboot.

I'm new to woodworking; I don't install flawless cabinetry for A-list clients. I'm learning. I'll buy the best quality that I can afford, but I also have to make do with lower-quality stuff on occasion. I may have to MacGuyver together a solution from time to time. I think I learn more from those situations, and improve my woodworking knowledge, than I would if I had an A-list shop.

tl;dr> Buy the best you can afford. But don't let that stop you from making sawdust.

Yeah I get that and I don't buy the most expensive version of every tool available...but if a particular clamp is a piece of junk, it's not just useless for a professional - it's useless for anyone.  Garbage is garbage regardless of who owns it.

I didn't mean to get into the weeds with my comment.  My only point was: have some pride in what you do.  Using decent tools is part of a meaningful woodworking experience.  "Decent" does not have to mean "most expensive," but a tool needs to work effectively for its intended purpose or it's only holding you back from your best work.  That's true whether you're a pro or a Sunday duffer...pride knows no pay scale.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.