Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What should I use to seal redwood planter?

Featured Replies

I finalized my planter design and have my cut list ready. I will be building this next week. I will line the interior with either pond liner or thick mil plastic. 

I'm using con heart redwood 2x4 for the build, the surface will be sanded all the way through to 180 grits and stained, thinking Preserva Wood pacific redwood stain/sealer but I want to add an extra layer of protection to keep the finish looking good for as long as possible. Would also like to have a semi gloss sheen to the finish. I did a gloss polyurethane finish on some benches that would show water spots whenever its wet. 

Should I do a semi gloss polyurethane over the finish like Minwax Semi gloss? 

planter box.jpg

If  the varnish will adhere to the stain sealer (check with manufacturer) I would use a spar varnish like "Epifanes" You will get better UV protection.  I have limited redwood experience but the one project that I did had a beautiful natural red color and I applied spar varnish with no other stain or sealer.

  • Author

epifanes seems to only be available in gloss finish. It's going along redwood fence. High gloss will be too distracting IMO

 

http://www.homedepot.com/p/Minwax-1-qt-Semi-Gloss-Helmsman-Indoor-Outdoor-Spar-Urethane-63210/100156304

 

that should work? I can do away with the stain sealer. I'll see how nice of a lumber I can pick out at the yard, I can find good color variation, i'll just sand and varnish and skip the staining to keep the natural redwood color. Problem with the con com redwood here is that most of them are half white half red. 

I think trying to seal up redwood with a film forming finish is a bad idea. Leaving the wood to weather would work and it will turn gray. Or you could paint it. Stain only and annual refreshment might work.

I'm with wdwerker, redwood, cypress, cedar and such if film finished, require re-finishing; sometimes on an annual basis.  No thanks.  Keep it natural and let it age gets my vote.  If you have to color it, Australian Timber Oil does a nice job without the brittle film.  Still need re-touching over time.

  • Author

I'm not entirely stuck on using redwood. Are there other types of wood I can use outdoors that is readily available in California that doesn't cost an arm and a leg? 

White oak is a hard, durable wood that does well outdoors & weather's beautifully.

  • Author

I checked the price for white oaks and found a seller that sell them by the BF which I've never heard of till today. 

for 2" thickness, it's $96/BF if the online calculator is correct, a 2x4 8ft board is 5.33BF that's a whoppig $48 a piece. 

The 2x4 8ft redwood board at the big box store that I'm looking at is only $8 a piece. Did I do the right calculation? the price sounds outrageous. 

I think there is a mistake in that price.

 

I find it easiest to reduce the board into cubic inches, then divide by 144. A board-foot is 12" x 12" x 1", or 144 cubic inches.

 

What did the seller give you as a board-foot price?

 

Woodworkerssource.com lists it at $6.99 per board-foot. At that price, a true 2x4 x 8' stick would be $37.28.

 

But that is a furniture grade, kiln-dried hardwood, not a squishy-wet piece of construction lumber. I can't speak to which is better for your application. Personally, I would tend to view outdoor planters as more or less disposable, so I would build cheap.

Yeah, you were off by a factor of ten. The two inch is sold by ten bd foot blocks, so 9.50 a bd ft plus or minus. That is high, but most everything is in California if rumor be true. The upside,would be that white oak would not need to be two inches thick to achieve what redwood could at two inches. It might require blocks in the inside corners, but you don't need two inches. 

  • Author

I think I'll stick to my original plan and stay with redwood, I'm going to need exactly 12 8ft boards that's 96ft, this project is going to add up real quick. Especially when I'll be building two boxes for sure maybe 3 depending on how good I can build the first. 

While I see the point of letting the redwood grey but I hate the grey look of redwood. I replaced my entire 200ft of redwood fence to get the "new look" last spring. I sealed it last season and will pressure wash and spray another coat of sealer this year. I'm going to try to do this annually when  Isee the sealer fade for as long as I can keep my sanity. 

I don't mind doing the same for a couple planter boxes to keep it looking new. 

Assume I do a spar vanish and it stays nice and sheeny for a couple years, I should be able to do a light sand and varnish again right? Is the stain supposed to fade even with varnish? 

12 hours ago, dannieboiz said:

I think I'll stick to my original plan and stay with redwood, I'm going to need exactly 12 8ft boards that's 96ft, this project is going to add up real quick. Especially when I'll be building two boxes for sure maybe 3 depending on how good I can build the first. 

At two inches thick and four inches wide, 96 lineal feet is 64 board feet. I am not sure this matters as you were posting a per stick price. Just in case it matters. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.